Make silicone phone case: How to DIY A Silicone Phone Case by Yourself?

Содержание

How to DIY A Silicone Phone Case by Yourself?

Walking on the way, we can see people wearing a variety of phone cases for their mobile phones. A phone case is not only a great way to protect your phone, but also a cool accessory to show your sense of style. A good phone case is one of life’s greatest little joys. But instead of buying a new one every so often, why not considering a DIY creation yourself? How to make your own phone case at home? In fact, it is not so complicated. In this post, we will invite you make a silicone phone case.

1. Put on plastic gloves and protect your work surface. Cover your counter with plastic wrap, parchment paper, or wax paper. You can also work on top of a marble counter or a glass sheet instead.

● Try to work in a well-ventilated area. Silicone can have a strong odor.

● The silicone used in this method is not the same as hot glue.

2. Measure out your cornstarch and clear silicone. Pour some cornstarch onto a smooth counter or into a glass bowl, then squeeze some clear silicone onto it. The measurements don’t have to be precise; you just want to have more cornstarch than silicone. Plan on using about 5 tablespoons (50 grams) of cornstarch and 2 to 3 tablespoons (30 to 40 grams) of silicone.

● Make sure that you are using clear silicone. You can find it in home improvement stores. It comes in a syringe.

● If you can’t find cornstarch, look for cornflour. You can also use potato starch instead.

3. Consider adding some color. You don’t have to do this, but it a good way to make your phone case look more interesting. If you don’t do this, your phone case will look white. You use a few drops of liquid dye, liquid watercolor, food coloring, or acrylic paint.

4. Knead everything together until the silicone turns to dough. You will need to knead it about 20 times or so. You won’t pick up all of the cornstarch, which is normal. The dough may look crumbly at first–just keep kneading!

5. Roll the dough into a flat sheet.  You can do this with a rolling pin, a glass, a wine bottle, or even a spray paint can. Keep rolling until you have a sheet a little larger than your phone. It should be about ⅛ inch (0.32 centimeter) thick.

6. Place your phone on top of the sheet. Make sure that your screen is facing upwards, and you have equal amounts (or close to it) of dough sticking out over each side.

7. Wrap the dough over the sides and top of your phone. Slide a paint spatula under the dough, then lift it up and fold the dough over the sides of the phone. Smooth out any creases or wrinkles; try to be as neat as possible.

8. Use stamps to indent designs, if desired. Flip your phone over and dust it with cornstarch. Use a stamp to indent designs into it. You can also use cardboard cutouts instead to create your own, unique designs. Lift the stamp away when you are done.

● If you want to make a quilted design, let the silicone harden for about 10 to 20 minutes, then dust it with cornstarch. Use a knife to make cross-crossing diagonal lines in a diamond/quilted pattern.

9. Let the silicone dry before removing it. How long this takes depends on the type of silicone you used and the weather condition. It may take just two hours, or it may take 24 hours. Once it is dry and solid to the touch (you can’t dent it), pull it off of your phone.

● If the case is dusty inside, wipe it down with a damp cloth.

10. Trim the excess silicone away from the front. Cut it about 7 millimeters away from the side edges, and 1 centimeter away from the top and bottom edges. Alternatively, you can cut along the indentations caused by the seam between the phone’s screen and case.

11. Cut out any indentations. If you were to look inside your cell phone case, you’d see little indents caused by the camera, flash, buttons, and sockets. Cut all of these out using a sharp craft blade.

● You can also carve a rectangle or trapezoid into the top and/or bottom edge for the speaker instead of cutting out a slot.

12. Sand the case smooth, if desired. You can apply more raw silicone on top if you want to, then smooth it out with a paint spatula or popsicle stick.

13. Paint the stamped areas with nail polish, if desired. Choose a color that goes well with your case. Metallic colors, such as silver, work especially well!

● You can make more shapes out of silicone separately, let them dry, paint them with nail polish, then glue them to the case with a drop of clear silicone.

After reading this article, is it not very simple? DIY phone cases would make fun and inexpensive gifts for family and friends. Let’s do it now, then you can show them that this is a phone case of hand made by yourself. Don’t you think it is awesome? On the other hand, if you think it’s too troublesome and don’t want to DIY by yourself, there are kinds of cheap and fashionable phone cases on GearVita for you to choose.

How to Make Your Own Phone Case: A Beginner’s Guide

Most people own a cell phone nowadays and a great way to protect it is by using a phone case.   But since cell phones come in different shapes and sizes, it can be hard to find one that fits your phone and style. No need to worry, in this article you will learn how to make your own phone case. It’s much easier than you think!

There are several ways how to make your own phone case from scratch. You can do it either with hot glue or with some silicone and cornstarch. Learn the step-by-step guide in this article:

 

How to Make Your Own Phone Case With a Hot Glue

A quick and easy way to make your own custom phone case is by using hot glue. You can find all the materials you need at home. If you’re looking to create a smooth phone case, this isn’t the one for you and you might want to check this product out instead. But if you want to be creative without spending a fortune, then follow the steps below:

 

Step 1: Gather All the Materials Needed

You will need:

  • Hot glue gun and glue sticks
  • Parchment paper (Don’t use wax paper as the glue will stick on the paper)
  • Tape (any kind would do)
  • Permanent marker
  • Pen or colored pencil
  • Nail polish or acrylic paint (Use this to design your case)

 

Step 2: Choosing Your Design

If you choose to use a template pattern, you will need to print the pattern so you can tape it at the back of the phone. Most people choose swirls or mandala patterns. You can find one that you like on the internet.

Photo by moritz320 via Pixabay

 

If you want to create your own design, you can do a free-hand or trace it. If you choose to do so, you need to do the following:

  1. Pull out a sheet of paper and trace your phone.
  2. Using the permanent marker, draw a pattern. Don’t forget the sides.
  3. Cut out the pattern, making sure you follow the outline.
  4. Tape the final output to the back of your phone.

 

Step 3: Wrap Your Phone With Parchment Paper

To do this, cut a sheet of parchment paper that is double the size of your phone. Put your phone on top of the paper, making sure that the screen is facing you. Cover the edges of your phone with the paper. Make sure that it is tight and secure it with tape. The tape should be on the front of the phone. You also need to wrap the top and bottom edges and secure them with tape as well.

 

Step 4:  Mark the Ports & Speakers

Using a pen or colored pen, mark off ports, camera, buttons, and anything else important. These marks will be your guideline so that the hot glue won’t cover them. Make sure that the color of the pen you use is visible.

 

Step 5: Start Gluing Your Case

First, you need to fill in the edges. Be sure to fill it nice and thick as this will support your case. Avoid all the buttons. After doing this, fill in the back. Follow the pattern you have or do it freestyle. Make sure that that you connect all the lines to the sides of the phone and each other.  Then, outline the front. You can either draw a thin line right next to the side edge or you can make tiny dots. This will ensure your case stays on your phone.

 

Step 6: Peel the Case & the Parchment Paper

After the glue has hardened, you can remove it off your phone. Next, remove the parchment paper from the phone. You can now test out the case on the phone. Check if there’s any glue covering the button, ports, camera, etc. If there is, you can cut it away with a craft blade.

 

Step 7: Paint the Case

Paint it with your desired color. You can use nail polish or acrylic paint, whatever’s available. Let it dry.

And that’s how you make your own phone case that is cheap and easy!

 

How to Make Your Own Silicone Phone Case

Photo by StockSnap via Pixabay

 

Don’t want to mess with hot glue? This option is for you. Creating a phone case from silicone helps make your case waterproof. This protects the back casing of your phone. (Please note that this doesn’t make your entire phone waterproof.)

Get crafty and follow the steps provided to make your own case.

 

Step 1: Prepare the Materials

What you’ll need:

  • 10 tablespoons of cornstarch (100 grams)
  • 5 tablespoons of clear silicone (50 grams)
  • 5 to 10 drops of liquid dye (depending on how intense the color you want to achieve)
  • Rolling pin
  • Craft blade
  • Nail polish or acrylic paint
  • Sandpaper
  • Plastic gloves
  • Plastic wrap or parchment paper or wax paper (whichever is available)
  • Glass bowl
  • Pain spatula

If you’re looking for alternatives, you can also use liquid watercolor, food coloring, or acrylic paint. If you don’t have a rolling pin, you can use a glass, spray paint, or wine bottle.

 

Step 2: Protect Yourself & Your Work Area

Put on plastic gloves to prevent contact with the silicone. Protect your workplace by covering it with plastic wrap, parchment paper, or wax paper. If none of these materials is available, you can work on top of a marble counter or a glass sheet. Be sure to work in a well-ventilated area because silicone can have a strong smell. Remember, the silicone used here is not the same as the hot glue.

 

Step 3: Mix Cornstarch & Clear Silicone

Pour cornstarch and clear silicone into a glass bowl. There is no exact measurement needed. All you need to do is make sure that there is more cornstarch than silicone. Sample measurement can be 5 tablespoons of cornstarch and 2-3 tablespoons of silicone.

 

Step 4: Add Some Color

Photo by Ulrike Leone via Pixabay

 

This is an optional step but if you want your own case to stand out, consider adding color. Put in a few drops of liquid dye (see step 1 for other alternatives). Not adding color will make your phone case look white.

 

Step 5: Knead the Mixture to Create a Dough

To make the silicone into a dough, you need to knead everything together. It will take you about 20 minutes to achieve the dough you need. Don’t worry if you can’t pick up the cornstarch, this is normal. Also, the dough may look powdery at first, this means that you should keep kneading.

 

Step 6: Flatten the Dough

Roll the dough to create a flat sheet. Make sure to roll the sheet until it is a little larger than the dough. The thickness should be about 1/8 inch or 0.32 centimeter.

 

Step 7: Wrap Your Phone With the Flattened Dough

Place your phone on top of the sheet making sure that the screen is facing upwards. You also should have equal amounts of dough sticking out on each side. Next, slide a paint spatula under the dough, then lift it and fold it over the sides of the phone. Smooth out any creases or wrinkles and try to make it neat as possible.

 

Step 8: Make Your Custom Design

Photo by Gonoise India via Pexels

 

This step is optional. First, you need to flip your phone over and dust it with cornstarch. Then, you can use stamps to indent designs into the case. You can also use cardboard cutouts to create your own design. Once done, lift the stamp away.

If you want a quilted design, give the silicone about 10 to 20 minutes to harden. Next, dust it with cornstarch and use a craft blade to make criss-cross lines in a diamond quilted pattern.

 

Step 9: Let the Silicone Dry

The length of drying will depend on the type of silicone and weather conditions. Some silicone will take 2 hours while some may take up to 24 hours. Be patient. Once it is dry and solid (make sure you can’t dent it), pull the case off your phone. If it’s dusty inside, wipe it with a damp cloth.

 

Step 10: Trim the Excess Silicone

Use the markings from the phone’s screen and case as a guide for cutting. You also need to cut out little indents from the camera, ports, buttons, etc. Use a sharp craft blade for this. Don’t forget to cut out a space for the speakers.

 

Step 11: Smooth Out & Paint the Case

Use sandpaper to make sure that your case is smooth. If you want, you can apply more raw silicone on top of it and smooth it out using an object with a sharp, flat surface.

You can paint the marked areas with acrylic paint or even nail polish. Be creative and use colors that you want for your case. You can create more shapes out of silicone, let them dry, and color them with nail polish. Glue them on the case with a drop of clear silicone.

 

How to Make Your Own Phone Case Using Online Tools

For whatever type of phone, there are websites where you can get tools to make your phone case. Many websites offer this kind of service, such as Printful. You can have your customized phone in three easy steps.

 

Step 1: Pick Your Phone Case

There are several custom iPhone cases and Samsung cases available online. Pick the one you need.

Photo taken from Amazon.com

 

Step 2: Add Your Design

You can use their built-in design tools or upload a custom graphic photo of your choice.

Don’t know what design to use? Here are some ideas:

  • Use a photo of your loved one or your favorite memory.
  • Add your name or your favorite quote.
  • Add a monogram to your case using your favorite colors.
  • Create a custom collage.
  • Put a picture of your pet.

These are some ideas that can help you decide which design to use.

 

Step 3: Submit Your Order

Wait for your case, put it on your phone, and voila! You have your customized case.

Some options on how to make your phone case may look tedious but do you know that you can earn money from it? That’s right. Create DIY custom iPhone and Android cases and turn them into your next business venture.

Some websites offer drop shipping for custom cases you create online. You can use Shopify as your eCommerce platform and Printful as your drop shipper. It’s an easy way to earn money without shedding out a lot.

How To Make a Phone Case from Scratch

DIY homemade phone cases can be more comfortable and easy than it seems. In this article, we will explain how to make a phone case from scratch using silicone, felt, and hot glue.

How To Make Phone Case With Silicone Material?

1- Wear plastic gloves and shield your work surface:

Silicone is the best type of phone case available on the market, then your work table or surface should be adequately covered with plastic, wax coverings, or any other material. A marble or glass surface can still pass for a work surface.

The working area must be well ventilated since silicone could be so pungent. The silicone which is used here is not similar to the glue.

2- Determine your cornstarch and Silicone quantity:

Turn some cornstarch onto a surface or glass container and gush the clear silicone into it as well. Though Precision with the measurement isn’t key, be sure that there is more cornstarch than silicone in the mix.

Five tablespoons (50 grams) of cornstarch and about three tablespoons (40 grams) of silicone is ideal.

The silicone used must be clear. Silicone arrives in syringes, and it is sold in home improvement outlets. Cornflour and potato starches are alternatives for cornstarch if it is not readily available.

3- Think of using color:

Though it is not compulsory you add color, it gives your phone an interesting finishing. Your phone will assume a white appearance if the color is not added.

Make do with a few drops of dye. Fluid color, food, and acrylic painting are also ideal.

4- Jumble the mixture into the dough:

Knead the mixture for about 20 rounds All the cornstarch may not be picked up. The dough may assume a dirty or an unpleasing appearance. Keep the kneading one

5- Rotate the dough into a flat plate, slate, or panel:

With a rolling pin, glass or spray paint can rotate or roll over till a sheet bigger than your phone is produced. The sheet thickness should be about 1/2inch approximately 0.32 cm

6- Position your phone on the sheet:

Be sure that the screen points upwards, and the dough uniformly stocked to either side of the phone 

7- Swaddle the mixture over the phone sides:

With a paint spatula, move the dough evenly around the phone. Level even-out grooves to give it a neat finishing.

8- Use stamps to impress designs:

Overturn your phone and cover it lightly with cornstarch. Use stamps to impress designs. Uplift the stamps, and you have completed it.

If you desire a quilted design, allow the silicone to solidify for over 10 to 20 minutes, spray lightly with cornstarch and with a knife, pattern cross-crossing diagonal lines in a diamond style,

9- Allow the silicone to dry before removal:

The drying duration is conditional on the kind of silicone used and the weather. It varies between two hours to 24 hours. When dried, wrench your phone out. Clean the inside with wet clothing if it is dirty.

10- Crop excess silicone:

About 7 millimeters away from the sides, remove excess silicone and a centimeter apart between the top and bottom edges. As an option, crop along with the impression by the lines between the screen and the case of the phone.

With the aid of a craft blade, crop impressions on camera, buttons, and sockets.

11- Color the stamped region with nail polish:

Use a color that matches your phone case. Metallic or silver color may be ideal. Now, produce more shapes and styles, and patterns of silicone individually. Dry, paint, and glue them to the clear phone case using the silicone drops.

How To Make a Phone Case With Hot Glue?

1- Pattern the shape of your phone:

Create a cute and pretty iPhone case from scratch may be daunting using hot glue. Often, many people choose a spiraling pattern. Trace or freehand the pattern. If you decide to trace, then the procedure is as scheduled- Mark the edges of your phone onto a piece of paper.

Using black ink, sketch and crop the pattern of your phone along with the marked delineation and mask the pattern to the rear of the phone

2- Swaddle your phone with stiff translucent paper:

Sever the size of the paper twice your phone. Position your phone on top. The screen should point down. Swaddle the severed paper around the verges and sides of your phone and support both with tape. The top and base of the phone should be supported as well with the tape.

Wrap your phone as firmly as possible. Switch it off to avoid phone overheating and be sure to tape everything up to the screen.

3- Crop the Parts:

With a pen, blotch the parts of your phone including the camera, socket, mic cavity, speaker, and buttons. Blotching guides you in tracing these parts so that you do not mistakenly envelope them with hot glue.

The colors used for the blotching must be visible. Properly layout, and fill the verges with the glue and be sure to make it neat

4- Detach the case and the paper :

As soon as the glue is fastened, flay it off your phone. Detach the paper and try out your case on your phone.

Make the final checks for glues covering the buttons and other parts of the phone. Crop them off with a craft blade if there is any.

4- Colour or paint your phone case if you wish:

Remove your phone and paint the exterior with nail polish. Allow drying. As an alternative, use spray paint if you desire a solid color for your case.

DIY Homemade Felt Phone Case from Scratch in 6 Steps

1- Chop a piece of felt into two:

In case you want to make a unique phone case with flowers to be a little bulky, then use two felt with either similar colors.

2- Slit the portions a centimeter bigger than your phone:

Position your cell phone on the felt. Using a centimeter border, outline, and crop the felt. Used the cut felt to pattern other pieces.

3- Position your phone between the two portions of felt:

Be sure that all the edges are in sync. If you desire to DIY a lined phone case from scratch at home with two colors, then use one color inside and the other outside.

4- Tack the surplus felt around the phone:

Ideally, only the two sides should be tack. Allow the top edge to be open and tack the felt firmly around the phone. Though it will be close-fitting initially, it will slack at the end.

5- Pull out your phone and sew along the tack edges:

The tacks serve as a guide while the sewing continues. The seam allowances which will vary depending on the phone thickness can be sown with a sewing machine (backstitch at the end of your sewing) or manually (do embroidery with varied colors)

6- Crop the stitched allowances:

Crop the stitches to about 0. 3 centimeters. For a distinctive appearance, use the pinking shears.

Conclusion:

If you’ve read this far, you’re ready to make your own phone case from scratch at home, you know everything you want to know about exactly what is needed to make your first phone case with silicone, hot glue, or felt. Also, you can create your own case using clear TPU material or consider buying a new protective and cute phone case.

how to make a silicone case

how to make a silicone case:

silicone case of production process
silicone case high temperature sulfur rubber as the main raw materials by moulding vulcanization molding process and production comes out silicon rubber products.

How to sew an original phone case.How to make a phone case with your own hands at home? Silicone case, made of fabric, felt, leather – photo Do-it-yourself phone

In order for the phone not to lose its appearance and to be maximally protected from damage, it simply needs a cover. The price for this accessory, although not too high, is still much more than average. That is why many people think about how to make a phone case with their own hands. Having made it yourself, you can not only save money, but also get a really beautiful and original accessory.

In order for the phone not to lose its appearance and to be maximally protected from damage, it just needs a cover.

You can easily make covers for a mobile phone at home. Moreover, it is not at all necessary to use expensive materials for this. Even a cardboard product – a handbag will fulfill its main functions, and it will look extraordinary and very beautiful.

What you need:

  • cardboard;
  • glue;
  • epoxy;
  • wooden sticks;
  • acetone;
  • cotton swabs;
  • decor elements.

Progress:

  1. First of all, you need to take measurements from your phone.
  2. Cut the unfolded workpiece out of the cardboard one and a half centimeters larger than the device itself.
  3. Secure the edge of the cover using a wooden stick. Glue cardboard to it.
  4. Reinforce the lower part of the workpiece in the same way.
  5. All gluing points must be coated with resin.
  6. Glue the jewelry to the future case.
  7. Treat the rest of the surface with this epoxy.

Wait a couple of hours for the resin to dry.

Gallery: DIY phone case (25 photos)

DIY budget phone cases (video)

Homemade Leather Smartphone Case

You can sew a classic leather case yourself, you don’t have to buy it in a store.This does not require special skills. Absolutely everyone can sew a case for a mobile device.

You can sew a classic leather case yourself

Work progress:

  1. Cut a rectangle from the main piece of leather. You need to determine the dimensions by grasping the smartphone with the original piece, leaving allowances for the seams.
  2. Mark the line of the future seam approximately half a centimeter from the edge.
  3. Mark the holes in the workpiece with the awl.
  4. Using a screwdriver, drill all required holes.
  5. Then give each hole the correct shape by making grooves.
  6. After that, sew the sides using a twisted nylon thread rubbed with paraffin.
  7. Leave the ends of the threads uncut, as the last stitch will need to be sewn after the case has been shaped.
  8. Place the workpiece in water for a couple of hours and then place a plywood blank of the appropriate shape in it.
  9. Leave the product in this form until it dries completely.
  10. After a day, remove the blank from the case and make the last stitch.

Cut off excess parts and sand the product with sandpaper.

Homemade Folding Case

One of the most stylish and convenient smartphone accessories is a folio case. You can also make it yourself. It only takes a few hours to work.
.

One of the most stylish and convenient smartphone accessories – a flip cover

Progress:

  1. Circle the cover around the perimeter, add another one and a half centimeters and draw an additional line.
  2. After that, cut out the base of the future cover.
  3. On the seamy side of the suede, draw a pair of center lines, the distance between which should be exactly one centimeter.
  4. Trace the pattern of the largest part on one side or the other of the centerline.
  5. Cut the pattern by one centimeter and circle the resulting workpiece under the frame.
  6. Draw around the inner part to both axial sides.
  7. Cut out the resulting frame, making allowances along the inner cut, turn to the wrong side and immediately sew short cuts.
  8. Sew the finished frame on top.
  9. Sew together the inner and outer parts of the product, while aligning the outer cut.
  10. Now fold the parts inward with the wrong side and sew, aligning the central parts.
  11. Place a raised seam along the contours of the smaller part.
  12. Now cut out a pocket and a belt, two and a half centimeters wide.
  13. Sew the strap and attach the buttons to it, sew in the front and in the middle of the cover.

In the inner part of the workpiece, fix the pocket with threads and cut off its edge so that it is flush with the edges of the inner part.

How to Upgrade an Old Purchased Case: Ideas

There is not always a desire to change a familiar, albeit shabby, old accessory for a new one. Parting with things is not easy for many. But there is a solution. You can simply fix the old case, peel off unnecessary parts from it and add more original decorations.There are many ideas for the restoration of old covers. You will have your own personal cover design.

The most original and simple options are made using the following materials:

  1. Wasi-tape. A regular silicone case will sparkle with new colors if you glue multi-colored ribbons sold in stationery stores on the back of it.
  2. Acrylic paints. Flight of imagination and no restrictions – you can draw any picture or simply apply paint in a continuous layer.In any case, the cover will look new and original.
  3. Nail polish. It is enough to make multi-colored droplets on the case with the help of varnish to make it look completely new.
  4. Rhinestones. It takes a few minutes to glue them to the product. In this case, it will be possible to hide all existing defects.
  5. Beads. You can fix them with hot glue and even ordinary plasticine. For a more reliable fixation, use also a transparent varnish.
  6. Neon decorations.They already have an adhesive surface from the beginning, so this work will be as simple as possible.

Silicone Glue Phone Case

One of the most creative options for making a cover can rightfully be called this one. The accessory simply cannot be compared with all purchased options.
. It looks very unusual and presentable.

What you need:

  • hot glue gun;
  • silicone glue sticks;
  • scotch tape;
  • baking paper;
  • masking tape;
  • rhinestones;
  • nail polish;
  • pencil.

We will conduct several master classes on the manufacture of silicone, felt, knitted, leather covers, as well as amazing bumpers from a herbarium and a baby sock.

Cover-herbarium

To make such a cover for a smartphone with your own hands, prepare:

First, think over the composition, applying flowers in various variations to the surface of the cover. Once you’ve found the “right”, let’s get to work:

  1. Take a picture of the perfect location to build upon as you create.
  2. Try to glue the large and light parts first, and on top of the smaller and darker ones – under the action of the resin, the plants will turn pale and become more transparent. Sprinkle with glitter at the end. Do not overdo it with details – the vegetation layer should not be thicker than 1.5 mm.
  3. Following the instructions, dilute the resin with water one to one.
  4. Gently pour the solution into the center. Then spread over the entire surface of the painting, removing air bubbles.
  5. Make sure that the resin solution does not overflow over the surface of the composition – in this case, quickly wash it with cotton swabs dipped in acetone.
  6. Smartphone Floral is ready after two hours of drying.

Silicone case

Protective cases for a smartphone made of silicone can be made by yourself using:

Before making a case for a smartphone with your own hands, be sure to wear rubber gloves.

  1. Mix 50 g of potato starch with approximately the same amount of sealant. Then knead this product to the consistency of plasticine, adding dye along the way so that the color is even.
  2. Roll the mass on a flat surface with a rolling pin or bottle to the desired thickness.
  3. Seal all openings of the phone with tape, then put it in the center of the resulting cake, pushing this device into it a little.
  4. Then use a spatula to fold the edges, making sure that the “pancake” fits perfectly to the smartphone.
  5. Be prepared for the phone to lie in the “captivity” of this mass from 12 hours to a day – this is how much the substance needs to freeze.
  6. After removing the phone, first remove the excess on the front, then cut the holes for the camera, charger, headphones – they should be imprinted.

Felt cover

DIY felt smartphone cover with:

And if you have a sewing machine:

  1. Cut out two identical rectangles – the outer and inner sides. It is necessary to take into account the length, width and thickness of the device, as well as a 5 mm allowance on each side for the seams.
  2. At the outer side we cut off one corner diagonally, so that in the future it will become a convenient pocket.
  3. Then lay the parts one on top of the other (outside-pocket outside), fold to fit the phone and sew 4 mm back from the edge.
  4. The felt does not peel off, therefore it is not necessary to process the edges. If you wish, decorate the product with a kind of applique or patch – a universal smartphone case has been created!

Smartphone case

For this product you will need:

  • leather or leatherette;
  • a thin piece of plastic;
  • universal glue;
  • two flat magnets;
  • awl, knife, scissors.

A leather case for a “book” format smartphone is done as follows:

  1. Cut out 2 pieces of the exact shape of the phone from plastic, make a slot for the camera on one of them.
  2. Glue the magnet to the “back” plastic in the right place.
  3. Glue both pieces of plastic to the skin, leaving a distance between them equal to the thickness of the gadget.
  4. Wrap a piece of leather so as to completely hide the plastic inside it, glue in the right places.
  5. From a piece of leather, wrap the second magnet in it, form a clasp, carefully glue it to the front.
  6. Do not forget to make the necessary slots for the camera and other necessary holes in the leather.
  7. Use double-sided tape to glue the device to the case.

Knitted case

The most “cozy” case for a smartphone with your own hands can be made of yarn, namely, knit it. Not so many materials will be needed:

There are two ways to use here:

  1. The easiest and fastest. Tie two identical canvases with your favorite pattern and sew them. Cast on loops across the width of the smartphone and then knit in length. You can type loops along the length of the device and knit already in its width.
  2. Knit “one piece” – the way socks are knitted. Cast on stitches two phone widths, then divide into four knitting needles. Continue knitting according to the chosen pattern, using only the front loops, until the length of the product is equal to the length of the smartphone.

You can crochet such a product, taking into account the first method.

Baby sock cover

Go shopping or order cute original baby socks through the internet market.You can easily make a smartphone case with your own hands from them. You will also need scissors, a needle and thread, various accessories for application to your taste – beads, pendants, ribbons, rhinestones, etc.

  1. Cut off the heel, sole of the foot and toes so that the remainder is rectangular.
  2. Sew open bottom.
  3. The remaining uncut fabric, which should have covered the top of the foot, fold up, sew on the sides – this will be a pocket.
  4. Decorate your creation with the trinkets you have prepared – sew or gently glue them to this unique toe cover.

Probably, today there is no person who does not have his own mobile phone. They are used by everyone and everywhere: both the older generation and the younger. In the mobile accessories market, you can find an endless variety of different mobile phone cases. If you are used to being original and unlike everyone else, then you will like this article.


Here you can find out how to make a phone case with your own hands
, and what you need to have on hand for this. Original and simple ideas are waiting for you in the article today.

How to make a paper phone case?

Do you want to protect your mobile from scratches, moreover, cheaply and quickly? There is such an option – this is the manufacture of a cover from plain paper. If you don’t have a cover yet, but you need to run, drive, walk somewhere, and you want your mobile to remain safe and sound throughout your journey, and you have limited time, the cover in question is exactly what you need necessary.

So, the only thing that will be useful for us to create the considered “protection” is a sheet of paper – neither scissors nor glue will be used in this case:

  1. Place the sheet of paper on the table in a horizontal position. You choose the color and size of it yourself.
  2. Place your mobile phone on the left edge of the sheet so that there is room for a fold.
  3. We begin to wrap the phone in paper, straightening all the folds. We do this to the end of the sheet.
  4. Bring the two ends of the sheet together, smooth them out. This will be the back of our paper case.
  5. Wrap the bottom of the sheet up. We make several folds to the bottom of the phone case so that the case is the same size as the mobile phone.
  6. We take the phone out of the case to make it easier to wrap the corners. This maneuver is done in order for the cover to hold the shape we have created.

Paper case, ready for use. It will take you no more than three minutes to “create” it, so this method of making “protection” for a mobile device is not only simple, but also fast.Now your phone is reliably protected from scratches and rain, so you can take it with you wherever you go with peace of mind.

If you want, you can paint it or cut out a “window” for the screen and speaker so that you don’t even have to take it out, but in this case, the screen must be covered with a protective film.

Now you know, how to make a phone case yourself
from a regular sheet of paper. Notice neither glue nor scotch tape in this case you will not need.

How to make a phone case out of rubber bands?

Rainbow rubber bands are a hit of more than one season.It is very easy to make various hairstyles with them, create interesting crafts. Today we will find out how to independently weave a bright summer case for your mobile device from rubber bands of different colors.

For this we need:

  • 800 rubber bands (choose the color palette yourself)
  • hook and braiding machine

A short list of the necessary tools does not mean the simplicity of the product, because to make such a cover you will need patience, perseverance and inspiration to craft.To say that it is easy to make such a cover is impossible, because the process is quite lengthy.

Detailed manufacturing instructions:

  1. First of all, you need to decide on the number of colors from which your cover will be made (the best option is 10 colors).
  2. To weave a cover for a modern smartphone, you only need two rows of the machine. In the situation under consideration, the central row will not be needed, because we will use only two side ones.For convenience, the row in the center can be removed (if there are more rows in your machine, they can also be removed for convenience).
  1. The placement of the columns themselves in the machine is very important. On one side, the open sections of the columns should face one way, and on the other side of the machine, the opposite.
  2. Choose which color we will start our weaving (for example, it will be black).
  3. We take an elastic band and carefully throw it on the first column in a row with an eight, attaching its other end to the second column diagonally, it turns out that from the first column on the right, we throw it onto the second column on the left.
  4. Thus, we put on 10 elastic bands of the same color diagonally.
  5. We turn the machine over, and begin to throw the elastic bands diagonally in the same way so that we get x-shaped figures.
  6. We put on one elastic band on the extreme columns of the machine exactly vertically, moreover, on one side and on the other.
  7. Using your fingers, lower the elastic bands on to the very bottom, so that it is more convenient to put on the next rows of elastic bands.
  8. The next pair of elastic bands (of a different color) must be thrown from one column to another in the same row, from right to left.So continue to the end of the row, using two rubber bands of each color.
  9. Carry out the same “maneuver” on the other side of the machine.
  1. Each row of elastic bands must be secured to the sides with black elastic bands, as in the first row.
  2. Now we need a crochet hook to start weaving. On all columns, you must throw off the two bottom elastic bands. It turns out – we throw one row, then we throw off the two lower elastic bands – this will be our weaving.
  3. Crochet the two lower elastic bands and move them to the center. We do this with each column on both sides of the machine.
  4. We put all the elastic bands down for easy throwing and weaving of the next row of elastic bands.
  5. In order for the color transitions on the case to be smoother, you need to throw on the next row of elastic bands, shifting the color by one column. So that the first column is not empty, it is necessary to throw an elastic band of a different color over it.
  1. Now we repeat everything, starting from the eleventh point, shifting the color one column each time for a smooth transition.We fix each row with a black elastic band.

The considered process of weaving the cover is quite long, and at one time it is very difficult to finish the work to the end.

When the bottom of the case is large enough, you need to check how many more rows you need to make for your phone to fit into it. To do this, you just need to shove the phone into the made part of the cover.

  1. Finishing the weaving of the cover also needs to be done correctly. So, take the hook, grab the two rubber bands on the first column in the row to the left, carefully remove them and transfer them to the next column.
  2. Do this for each column in the row. We repeat in the same way with the columns in the other row.
  1. The cover is ready, we remove it from our machine and try it on our mobile device.

This work is quite painstaking, but the result is worth it. The brightness and originality of the made cover will delight you.

How to make a phone case from a balloon?

If you turn on your imagination, you can come up with and “make” unusual and beautiful things with your own hands, so, for example, you can make an excellent case for your smartphone from an ordinary balloon.Let’s find out how to make a phone case at home
using a regular ball:

  1. Inflate the balloon. No need to inflate too large, medium balloon size is what you need
  2. We put it on a flat surface, holding the place of inflation with our fingers so that air does not escape
  3. Put the mobile phone on top of the ball
  4. We press it against the ball, gradually letting the air out of the ball with the other hand. We do it carefully and very slowly
  5. As the ball descends, press the phone harder to its surface

When the balloon is completely free of air, it will “wrap” your phone tightly with its surface, thereby protecting it from moisture, dust and shock.

  1. If the tip of the ball is in your way, just cut it off

This case is a budget option, it is:

  • cheap
  • practical
  • it’s easy to make
  • and you can change the colors of the cover at least every day

In addition, this is a universal protection option, because it is suitable for most models of modern mobile devices and tablets.

How to make a phone case out of glue?

Did you know that hot glue can be used not only for gluing and gluing, but also for making an unusual, practical and original phone case.The size, shape and model of the device do not play any role in this case. So, for our case to be perfect, we need:

  • hot glue gun
  • parchment paper
  • scotch tape
  • for decoration – colored varnishes

Everything is done very quickly and easily, let’s get started:

  1. Turn on the gun to heat the glue in it.
  2. While it is warming up, it is necessary to wrap our phone in parchment paper. You need to do this so that no folds and excess paper remain on it, parchment paper should wrap the phone tightly and in one layer (scotch tape will help with this).
  3. We spread parchment paper on a flat surface, put the phone on it.
  4. Using hot glue, draw various patterns on the surface of parchment paper, in which the mobile is wrapped (design and patterns are chosen independently, based on preferences and skill of drawing).
  5. Don’t forget to leave room for speakers, side charging ports and headphones.
  6. We are waiting for the glue to completely harden in order to carefully remove the hardened case from the phone.
  7. We paint it with all kinds of colored varnishes.

The main advantage of this case is its originality and uniqueness. Except for you, no one else will have such a cover. You now know how to make a phone case with hot glue
.

How to make a silicone phone case?

Probably, few people have come across the independent manufacture of something from silicone. It turns out that not everything is as complicated as it might seem.So let’s find out how you can make a phone case
made of silicone. We need:

  • disposable plate
  • starch (potato or corn)
  • silicone
  • paints

Instruction for making a silicone cover:

  1. Pour some starch onto a plastic plate. It can be purchased at any grocery store or supermarket.
  2. Pour some silicone on top of the starch and carefully combine the two ingredients.
  3. Add paints to the prepared “dough” (choose colors according to your taste) to get the color we need.
  4. Knead the silicone like plasticine until soft and elastic so that its color becomes uniform.
  5. Now you need to start preparing your phone. To do this, you need to wrap it over the entire surface with cling film.
  6. Sprinkle the table with starch so that the silicone does not stick to the surface, and start rolling the silicone “ball” we made with a rolling pin.
  7. Put the phone on top, form a cover.
  8. Remove all irregularities and excess starch with a cloth, but always dry.
  9. Cut off all unnecessary excess silicone.
  10. Additional molds, patterns, decor on the cover can be molded from the remains of the silicone mixture.
  11. We glue them to the cover with silicone.
  12. Cut out the holes for the sensor, microphone and headset.

If you wish, you can paint the cover in any color.

How to make a flip phone case?

Today flip covers have become a popular way to protect phones and tablets. Let’s find out how to make a phone case out of cardboard and felt
without any help to get the cover model – book, without spending more than 15 minutes.

Prepare immediately:

  • cardboard (preferably thick)
  • felt – multiple colors
  • scissors
  • underwear elastic band
  • cutter
  • optional – self-adhesive rhinestone decor
  • ruler with pencil
  • glue gun

Manufacturing instruction:

  1. It is necessary to cut three blanks from thick cardboard, which will be identical to the size of your phone.To do this, put the phone on cardboard, draw a pencil outline, and cut it out. Duplicate the workpiece two more times.
  2. We cut one of the cut out blanks in half with scissors or a cutter.
  3. Take A4 size felt and glue two halves of the cut workpiece on it at a distance of 7 mm from each other.
  1. Glue another whole blank to the felt at a distance of 3 cm from the previous blank.
  2. Cut off the excess felt, leaving allowances in order to glue our cardboard with them.
  3. Glue felt of a different color onto the whole blank and one of the halves of the second blank.
  4. The last cardboard blank must be pasted over with felt of the same color that was used in the previous paragraph.
  5. At the edges we glue small rubber bands on it, which will hold our mobile phone.
  6. Glue the blank with elastic bands on the part of the cardboard that remained unsticked on the first part of our future cover.
  7. Glue Velcro to the finished cover, which will serve as a fastener.
  8. We decorate a book cover with rhinestones, stickers or beads.

If desired, the same cover can be made of leather or any other fabric
.

If you decide to “make” a phone case with your own hands, for these purposes you can use various materials at hand in the form of felt, silicone, fabric, glue, etc. The main thing here is your imagination and desire to make something original and unusual with your own hands. The methods presented above are very simple and do not require special expenses, so choose any of them, and go ahead – create your own “works of art”.

Video: “How to make a phone case?”

How to make the silicone case fit snugly. How to stretch or shrink a silicone phone case? How to make a transparent phone case

Then most likely you purchased a low-quality accessory from a dubious prepaid seller or received such an unpleasant surprise bundled with a smartphone from China.

Although not pleasant, you can still try to restore the silicone case.Why try? Yes, because it is not known how a particular cover will behave during heat treatment, and yet some bumpers can be restored in size and bent edges fixed.

It should be noted right away that in this article we are talking about covers made of thermoplastic polyurethane (TPU), this is the main material for the production of bumpers today, but there are other material options, and how they will behave when processed in this way is difficult to predict.

Thermal reshaping

Most often, this kind of deformation and elongation occurs during careless transportation of covers or during storage in improper conditions without a special damper insert.Such cases take an irregular shape and do not fit snugly on the smartphone. However, if such an accessory was made to the exact size, this can be corrected.

To restore the cover, we need two containers with water, it is very important that the size of the containers used is larger than the size of the cover itself. If you place the case in a small container, you risk deforming the accessory even more.

In the first container, bring the water to a boil and leave on low heat, and in the second, the water should be as cold as possible.

Immerse the stretched cover in boiling water and hold for up to 5 minutes (time depends on the thickness of the cover). After the cover has warmed up well enough, transfer it to cold water, while if there are deformations at the edges of the bumper, straighten them with your hands and in this position lower them into cold water.

Such a sharp temperature change can cause a slight decrease in size, but if the cover has a significant deviation in size, you most likely will not be able to reduce it.

How to buy a quality case?

Marriage among accessories happens in any store, even the most famous, but the approach to solving the problem is the hallmark of good stores.

If you are forced to choose a cover over the Internet and you cannot try it on and hold it in your hands before buying, you can always use the cash on delivery service. This service is provided by most of the delivery companies in Ukraine. And suspicious sellers who refuse to send you goods in this way should immediately make you suspicious.

Most likely, they are selling poor quality goods and are afraid that you will refuse it.

It often happens that it is not profitable for you as a buyer to pay the cost of delivery, and even the cost of cash on delivery, however, the online store site goes to your meeting and pays for the delivery of any goods at its own expense. You can order a high-quality cover at all not expensive, try it on at the New Mail office before paying, and at the same time not overpay inadequate amounts.

Return or exchange guarantee

A money back guarantee or exchange of defective goods can be very useful, most good stores are required by law to adhere to this rule and provide you with such a guarantee for a period of 14 days. However, in the online store site such a guarantee is as long as 25 days!
This is an opportunity to test the product in practice, without risking losing your money.

Please note that unscrupulous sellers also write about this guarantee, however, they use free ad services and one-page sites to distribute their goods, since you will not be able to check reviews about such a seller or complain somewhere.

When choosing a reliable store, pay attention to the presence of a real address, reviews using authorization through social networks and quality advice on the issue of interest to you.

Ask if you can come up and see the product at the specified address? If the seller refuses to show you the product and insists on sending on a prepaid or partial payment basis, most likely he is a scammer.

Our online store also has a YouTube channel, and you can see how the type of case you are interested in looks like.


Even a silicone case purchased for a specific phone model may not be the right size. If it was sent through an online store or purchased without “fitting”, then it may be difficult to return the goods. In this case, it becomes necessary to take measures on your own. In the current article, we will consider how to stretch silicone or, conversely, shrink it using available tools.

How to Stretch Silicone Phone Case

Silicone is a fairly strong material, which at the same time is very elastic.The last property is associated with a significant disadvantage of such covers – they stretch over time. Well, if you need to speed up the process and increase the size of the overlay immediately, there are several effective ways:

The presented methods will help to cope with the problem of a small cover, if its size needs to be increased by 1-3 mm.

How to shrink the silicone case

As already mentioned, silicone has a significant drawback – it stretches after some time of use.For this reason, the question arises of what to do if the silicone cover is stretched. You can try to reduce it using the method below. The presented method has been tested by many people and is guaranteed to help you cope with the task.

Before proceeding with specific actions, you should know that the size will decrease by 1-2 mm. If the cover is very loose, then it is better to buy a new one and not waste your time. In case of slight stretching, proceed as follows:

  • Select a pan that will allow the pad to be completely inserted into it without touching the edges.Pour water into it and put it on the stove to heat up.
  • Bring the water to a boil and place the accessory in it.
  • Boil the pad for about 5-7 minutes, while holding it with a fork so that the water completely covers the material.
  • Remove from the pan and leave to cool completely.
  • Wipe dry and try on the phone – the case is smaller and fits snugly to the body.

Before performing the procedure, it is important to pay attention to the material of the overlay. In the case of its transparency, the polymer alloy will become cloudy, and real silicone will not change its properties.However, this does not matter for opaque accessories. Some users note that they were able to partially restore transparency by placing the case on the battery for a while.

The desire to beautifully decorate your phone arises in everyone who visits the website of the online store https://itsellopt.com.ua/ at the sight of attractive covers and bumpers. But not all of them can give the communication device proper protection in case of impact or fall. And if there is a shock-absorbing bumper for the phone in the assortment, then it will either not be suitable for your model, or its cost will be astronomical.There is only one way out – to spend a little time, imagination, energy and make a beautiful case from scrap materials.

Everyone has a desire to decorate their phone

A colorful bumper can be made of silicone for making molds without touching brushes or glue.

To prepare the material you will need:

  • Building silicone;
  • Potato starch for thickening and for imparting white color;
  • Color or acrylic paint.

It is best to use silicone gloves during the mixing process. So the hands will feel the material, and you will not have to wash them for a long time.

Manufacturing technology:

  1. Having squeezed out the silicone, add two tablespoons of potato starch to it.
  2. The kneading process for silicone “dough” is similar to the preparatory stage before modeling with plasticine. It needs to be crumpled until the mass becomes homogeneous.
  3. If you divide the resulting mass into several almost equal pieces, and add color to each of them, you get multi-colored balls.They need to be flattened, folded so that each previous one looks out from under the previous cake by a few millimeters.
  4. Using a rolling pin, the workpiece must be rolled out so that it is enough for the back wall of the gadget, its edges and a small bend on the front side.
  5. The phone is wrapped in the resulting multi-colored or monochromatic sheet of silicone.
  6. It is necessary to press it a little into the “dough” to mark the holes for the camera, speaker grill, located on the back side.
  7. Connectors, control buttons from the side elements of the phone should be outlined by dragging your thumb along the entire perimeter of the phone.
  8. The silicone must be cured. The time of its readiness depends on the thickness of the rolled layer and the data laid down by the manufacturer.
  9. It is better to remove excess silicone immediately using a stack or a plastic knife. It is easier to form corners without extra material.

Tip! The hardening of the silicone mass can take up to 12 hours.Move the SIM card to another phone or make call forwarding. Otherwise, the flat surface of the cover will not work.

Gallery: bumper and phone case (25 photos)

How to make a silicone bumper with your own hands (video)

How to make a transparent phone case

The easiest way to put your phone in a transparent case that only protects against moisture and dust is to use a piece of dense shrink wrap.You can find the source material at any grocery store. It supplies glass jars with canned food.

You can find the source material in any grocery store

Cut out a rectangle from the film so that it is 1.5-2 cm larger than the phone on each side. Bending the film on the front side of the phone, it must be heated with the flame of a lighter. Only the flame should not touch her. The evenly planted film will become the skin of the gadget. It can only be removed with scissors.But that will be much later. In the meantime, you will need a manicure set in order to cut holes for the camera, side buttons, charger and headphones.

Transparent silicone cover

To make a transparent silicone case, you need material of the appropriate quality. A silicone sealant for glass bonding is best suited for this purpose. Its setting time is 30 minutes.

For work you will need:

  • Box. The one in which the phone was sold will do.
  • Soft clay or modeling dough.
  • Polyethylene film to protect the phone from contact with materials – plasticine and not hardened sealant.

Step by step instructions:

  1. The box is filled with clay or dough by a third.
  2. The telephone is enclosed in a thin plastic bag.
  3. It must be placed in the middle of the plasticine pillow and evenly pressed in to form a shape 2-3 mm deeper than the thickness of the phone itself.
  4. The resulting shape must be coated with an even layer of sealant.
  5. Reinsert the telephone into the recess it has made.
  6. Silicone extruded onto the surface can be slightly smoothed, giving it the shape of a future cover.
  7. After the material has dried, the phone together with the bumper are removed from the mold. They are cleared of plasticine and polyethylene.

Tip! If the protective layer of the cover is planned to be thicker than 3 mm, then the recess in the plasticine mold must be made deeper.

How to decorate the silicone case

The decoration of the silicone case can be made during the manufacturing process.

  1. Small rhinestones in the form of your own initials, contours of animal faces and other simple ornaments can be inserted into the thick silicone transparent layer.
  2. Glitters are added to silicone during the process of spreading over the mold or preparing the “dough” before rolling. In the first case, shiny crumbs can be poured through a strainer, which is necessary for even distribution.In the second, it is better to mix them with potato starch.
  3. Rhinestones on an adhesive base will allow you to make an original decoration on the rear wall of the bumper.
  4. The most original and unique silicone cases are obtained by decorating with dot patterns made with acrylic paints. The material is available in small tubes with dispensing nozzles at craft stores. You can draw and decorate any drawing for the cover yourself.

The easiest way to decorate is to find a beautiful picture of the desired format and insert it between the phone and the case.It turns out to be a great decor.

How to make a phone case out of a balloon

The technique of creating such a bumper is like vacuum packing a phone in latex.

  1. The balloon is inflated to medium size.
  2. Place it on a flat surface, holding the neck with two fingers.
  3. Place the telephone on the middle of it.
  4. The gadget must be slightly pressed down, and the air from the ball must be vented.
  5. A couple of minutes of work and the phone is wearing a bright new shirt.
  6. It remains only to cut the holes for the camera and connectors, and the thin material will not interfere with the operation of the buttons.

The technique of creating such a bumper is similar to vacuum packing a phone in latex

Smartphone case made of paper

A bookcase made of vinyl wallpaper is made according to the principle of a box.

To do this, you need to take:

  • Ruler;
  • Pencil;
  • Scissors;
  • Adhesive.

The cover can also be made using origami

Making the cover:

  1. On a sheet of paper, departing from the edge of 1 cm with an increase in the thickness of the side wall, the contour of the phone is outlined.
  2. Having departed from the picture No. 1 the gap equal to the thickness of the device + 1 mm, the telephone is circled for the second time.
  3. Above and below the wall thickness + 1 cm is also added.
  4. Cut out, using nail scissors or a blade, holes for a charger, headphones, camera lens, screen.

The same bumper made of corrugated cardboard will provide excellent protection for your phone in case of bumps and falls. The only thing is that decorating it is more difficult. You can paint it, apply a dense dot pattern to it with acrylic paints. But this will not protect the paper from getting wet in the rain.

You can independently increase the moisture resistance of paper or cardboard using lamination. To make a homemade cover both beautiful and moisture resistant, you first need to cut it out, paint it, laminate it, and only then assemble it.

Is it possible to reduce the rubber cover

Rubber boots stretch during operation. They can be returned to their original size. To do this, they must be immersed in boiling water. They will become more plastic, and when cooled, they should return to their original size.

Some bumpers made of rubber with a high proportion of plastic are not as flexible as rubber. But they can also be made smaller at home. If immersion of the cover in boiling water does not lead to the expected result, you can try to boil it for 5 minutes – the principle of preparing a polyethylene suction cover.He works. Just don’t put a wet bumper on the phone, remove moisture from it.

Making a Coca-Cola cover (video)

(No ratings yet)

The mobile phone case does not fit a bit. How to stretch it?

    My mobile phone case didn’t fit a bit. That is, the mobile phone included quot; vnatyagquot;. At the same time, the buttons turned on and the display lights up. I solved this problem by wrapping the phone with paper and putting it in a case overnight.As you stretch the cover and enlarge it, you can add paper. After two or three weeks, the problem was resolved.

    To stretch the leather case, make a mock-up of your phone from a piece of wood (the thickness should be slightly thicker than the phone), split it in half lengthwise and insert them into the case. Between the halves, insert a plastic insert of the thickness over which you want to stretch the phone and lower it for a day in a jar of warm water (you can put the jar on a battery). Remove the cover from the water and air dry.

    Alternatively, you can use alcohol instead of water, which will significantly reduce the drying time.

    Why tab? Because after drying, the cover can squeeze the layout so that it will be impossible to remove the piece of wood. In addition, the tree will also swell from the water. And the plastic, even sandwiched between the pieces of wood, can easily be pulled out. Just remember to make the insert so long that you can grab onto it later.

    Don’t want to bother with making a model? There is an easy way, but the quality is not guaranteed.

    Simply insert pencils, felt-tip pens, round rods, etc., along the edges of the case. of the appropriate diameter, and between them with an interference fit push a rectangular piece of a suitable size. The rest is the same as described above.

  • How to stretch a leather phone case?

    1. Soak in alcohol-glycerin solution.
    2. Insert a piece of wood into the cover to which you want to stretch the cover. Wait a day.

    How to stretch the silicone case?

    1. Soak in hot water.
    2. Immediately after heating, put on a wooden mold.

Some people buy a case to decorate the phone, others – to protect the case from scratches and damage. And sometimes a situation arises when you like an accessory for a mobile phone, but the size does not fit. How to stretch the cover and not damage it? To solve this problem, you need to take into account its shape and the material from which it is made. Read on for more on this.

Stretching a leather case is not difficult

How to stretch a leather case

A leather case that does not fit on the phone or sits too tightly, causing the buttons to operate, it is advisable to enlarge a little.The leather stretches well if you wet it with water, and when it dries, it retains its predetermined shape, so use the simple method.

  • Try to pick or cut out a piece of wood that is the same size as your mobile.
  • Split the resulting workpiece in half on the flat side. Insert a thin plastic plate into the slot.
  • Wet the cover well in warm water and pull it over a wooden model.
  • Leave it to air dry without heating, otherwise the skin will dry out and crack.
  • After about a day, when the cover is dry, remove the plate, and then the wooden block.

The accessory will stretch to the desired size. If you use a mixture of alcohol and glycerin instead of water, the drying time will decrease, the procedure will be more gentle for the skin, and the surface will retain its shine.

How to stretch the silicone cover

Silicone is a fairly strong and elastic material. There are a lot of covers from it, so you can always choose the right option.If desired, an accessory is purchased – a bumper, which is easier to put on and there is no need to select the location of the connectors.

Still, there are times when it is necessary to stretch the silicone cover. You can do it like this.

  • Given the property of silicone stretching over time, you can wrinkle it with your hands and pull it to the sides. If the size doesn’t fit quite a bit, you will soon be able to put it on.
  • After heating, the silicone becomes more flexible, and it is easier to pull the cover over the phone. A hairdryer can be used here.
  • If there is a big difference in size, a stretch on a wooden model will do. The cover must be heated in hot water, pulled over a prepared block, heated in water for an hour and cooled in air. The disadvantage of this method is that the silicone can stretch too much and will dangle on the phone.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *