Cross cut and confetti cut paper shredder differences!
is no practical difference between a confetti-cut shredder and a cross cut
shredder. Both use two drums rotating perpendicular to each other to chop documents
into small pieces, known as chad. Some cross-cut shredders produce rectangles
of paper rather than confetti-like squares or diamonds; otherwise the two kinds
of shredders are virtually identical.
a paper shredder helps protect you, your family, and your business from
identity theft by destroying sensitive documents. The familiar strip-cut
shredder only cuts documents in one direction, resulting in long, narrow strips
of paper that a dedicated criminal could reassembly glean your personal data.
Use a paper shredder marketed as a cross-cut or a confetti-cut to shred
sensitive documents into tiny paper scraps, obscuring the information more
levels of shred size are available so look at the article – Shredder Cut Security Levels – to see what cut
size fits your needs. Level four and
higher shredders are fine for most of us but carefully consider what cut is
best for you.
top secret document destruction, the US Government requires paper to be shred
into 15,081 particles per sheet or into pieces no larger than 1/32 x 3/16 in
size. This is considered a level 6
requirement is considered safe after the DARPAR Challenge in 2011. The DAPAR challenge was an event sponsored by
the Pentagon where teams were offered an award of $50,000 if they could
successfully solve puzzles written on paper that was shred into 6,000 chads per
only one team out of 9,000 who entered was able to decode all the puzzles and
claim the government prize, the DOD determined a level 6 shredder to be secure.
well as securing your data, cross-cut and confetti-cut shredders also have
other advantages. You’ll also need to empty your shredder less often as the
chad (paper scraps) take up less room than the bulky paper strips created by
strip-cut shredders. These tiny scraps take up less room in your household or business
waste than heaps of strips.
can find cross-cut and confetti-cut shredders with various useful features,
such as the ability to shred paper with staples and paper clips attached without
causing blade damage. Some are capable of shredding thicker materials such as
cardboard which can be useful for packing material.
have a Multi-Media slot dedicated to CDs and DVDs while others accept this
material in the same slot as the paper. A
credit-card shredder ensures that no-one can make use of your unwanted credit
or debit card. The most important feature of a cross-cut or confetti-cut
shredder is the shred size; the smaller the chad, the less likely it is that
someone will be able to re-assemble your documents.
that not all domestic paper recycling services will take shredded paper,
especially chad from a cross-cut shredder. You may have to arrange for it to be
recycled by a commercial company. You can also use paper chad around the home;
in paper briquettes, for children’s crafts or as animal bedding, for instance.
Learn How To Use Your Home Shredder To Make Confetti!
February 06, 2017
Everyone loves confetti right!?! I mean, I know my mom loves confetti, probably more than the average person. She adds confetti to every single card she puts in the mail, so much so that her friends now open her cards over the trash to avoid the mess. But who wants to avoid the mess? Not me – that’s all part of the fun! So today I’m sharing how you can quickly and easily make your own confetti using a “micro-cut” home shredder and regular paper, it’s awesome. Then we’re using plastic test tubes to give out this cute confetti at your ceremony so that your guests can gently toss it your way during your processional. Sometimes you just need to toss some confetti in the air… and what better time then during a wedding!
- “Micro-Cut” Shredder
- 8.5″ x 11″ Regular Paper, in any color
- Plastic Test Tubes with Screw Top
- 8.5″ x 11″ Sticker Paper
- Home Printer
- Our FREE “Toss Me” tag printable at the end of the post!
Shred Your Paper
Finding the right shredder to actually do this, and make it look cute, has taken me a while… but I’ve finally found one! This AmazonBasics 6-Sheet High-Security Micro-Cut Paper and Credit Card Shredder does an AMAZING job turning regular old paper into fabulous confetti pieces! The key is to get a “micro-cut” machine, not a “cross-cut” or the pieces won’t be small and cute. This shredder actually has a continuous run time of 3 minutes, meaning you can literally shred paper for 3 minutes straight. Which seems like a short amount of time, but it isn’t. If you shred for too long, it has an auto sensor that shuts it down so the motor doesn’t over heat.
Paper Note: regular weight (thickness) paper will work the best for this confetti. You can use thicker paper like cardstock, but the edges will look more torn up.
Print + Cut + Label
Download our free “TOSS ME” label printable at the end of the post, or create your own! Then print onto 8.5″ x 11″ sticker paper and cut each one out; they measure 5/8″ x 2.75″. Peel the backing off and stick onto each test tube.
Fill Your Test Tubes
Each of these exact test tubes will hold 1/4″ cup of confetti. 10 sheets of regular paper will yield 6 cups of confetti, meaning you can get 24 favor tubes from 10 sheets; or 12 favor tubes from 5 sheets!
Keep Some Confetti Around
Even if you aren’t making these for a wedding, you can still make this confetti to keep around for those special times when you just need to throw some in the air!
Place On Each Ceremony Chair
Place one favor tube on each chair at your ceremony and expect the most fabulous shower of confetti as you make your way back down the aisle as Mr + Mrs! …and yes, I made a few turquoise tubes just for me!
As with all our DIY tutorials, if you create one of our projects please send us a picture – We Love Seeing Your Creativity! If you use Instagram or Twitter please use the hashtag #SomethingTurquoiseDIY and it will show up on our Get Social page. Happy Crafting!
DIY Tutorial Credits
Photography + DIY Tutorial: Jen Carreiro of Something Turquoise // Micro-Cut Shredder: AmazonBasics // 8.5″ x 11″ Paper in Slate, Blossom, Night, Luxe Blush, and Shimmer Silver: Paper Source // Clear Plastic Test Tubes with Screw Top: Amazon // 8.5″ x 11″ Sticker Paper: Staples // Nail Polish: OPI – Withstands the Test of Thyme
Shop The Supplies:
Find the supplies you’ll need for this project from our affiliate links below:
Cross-cut vs Micro-cut shredder – Which is better?
A cross-cut shredder is a less secure paper shredder compared to a micro-cut shredder. Cross-cut paper shredders rate from security level P-3 and P-4. Where micro-cut shredders rate from P-5, P-6, and P-7. The latter is also known as nano-cut.
Read more about paper shredders in our shredder guide.
What is the most secure?
So, which is better? A micro-cut shredder is the most secure type of paper shredder. The downside is that micro-cut shredders process paper slower than cross-cut shredders, and the high security shredding machines are more expensive.
Best secure paper shredders
Check our recommended paper shredders for home and office use. Our best picks contain cross-cut and micro-cut shredders:
What is the main difference?
Both cross-cut and micro-cut shredders offer far more security than a strip-cut shredder. Cross-cut shredders are classified as ‘secure’ or ‘medium-security’ shredder.
In comparison, a micro-cut shredder is classified as a ‘very secure’ or ‘high-security’ shredder. The main difference is that a micro-cut shredder offers more security because the shredded paper particles are smaller than standard cross-cut shreds.
Both paper shredders cut a page diagonally from both corners. Because both shredders cut sideways means that a micro-cut shredder works the same as a cross-cut shredder. The only difference is that a micro-cut shredder produces smaller and more particles per shredded document.
The DIN 66399 P-security level is part of the official German DIN 66399 standard (since 2012), the international standard for secure shredding of data media developed by the Deutsches Institut für Normung (DIN), which translates to the German Institute for Standardization.
How many shreds per page?
- P-3 (cross-cut) – 200 shreds per page
- P-4 (cross-cut) – 400 shreds per page
- P-5 (micro-cut) – 2,000 shreds per page
- P-6 (micro-cut) – 6,000 shreds per page
- P-7 (nano-cut) – 12,000 shreds per page
On average a micro-cut shredder shreds a page over 10 times smaller than a cross-cut shredder.
What is a cross-cut shredder?
Cross-cut shredders offer a medium level of data security and the minimum requirement for shredding confidential documents, such as bank statements, documents with personal data, or business papers.
We recommended opting for the more secure P-4 cross-cut shredder rather than the P-3 cross-cut shredder. On average, a cross-cut shredder shreds a document into 400 particles.
A cross-cut shredder is also known as a confetti-cut, particle-cut or diamond-cut shredder.
- Shreds documents in small particles
- Wide choice of cross-cut shredders
- Particles are more condensed than strips
- Documents are hard to reconstruct
- Shreds faster than micro-cut shredders
- Needs maintenance and oiling
- Not recommended for highly confidential documents
- Generally slower than strip-cut shredders
What is a micro-cut shredder?
Micro-cut shredders offer a high data security level. We advise using micro-cut shredders for shredding highly confidential documents, such as contracts, government documents, or medical documents.
One piece of paper ends up in more than 2,000 tiny particles shredded with a P-5 paper shredder.
A micro-cut shredder is also known as a security-cut shredder.
- Very small paper particles.
- High level of security.
- Wide choice of micro-cut shredders
- Keep your sensitive information safe.
- Shredding process is slower than a similar cross-cut shredder.
- The machine needs to cool down quicker.
- Needs maintenance and oiling
- Micro-cut shredders are relatively more expensive.
Is cross-cut secure enough?
A cross-cut shredder is secure enough for shredding most of your confidential documents. But when you need more security and peace of mind, it is recommended to use a micro-cut shredder with DIN security level P-5 or higher.
Micro-cut particles are barely readable.
The 3 Types of Cuts in Paper Shredder Machines
Identity theft remains a major concern for consumers as criminals find new ways to steal data. In 2017, the number of identity fraud victims hit a record high of 16.7 million, according to the FTC. Paper continues to be a common target for fraudsters, with one in every five data breaches involving paper documents.
The shredder cut style determines the security level of your secure paper shredder. It is an essential factor to keep in mind as you source for a new commercial shredder for your office. High-security shredders help mitigate the risk of your sensitive information falling into the wrong hands.
The security level of your industrial shredder will depend on the kind of information contained in the paper that you want to shred. It determines how thoroughly the paper is cut. There are three basic cut styles: strip-cut, cross-cut, and micro-cut.
7 DIN 66399 standards determine the security level of a paper shredder, with classes ranging from P-1 to P-7. Class P-1 is the lowest security level, suitable for general documents. P-7 is designed for data demanding the highest security.
The strip-cut is the most common shredder cut-type present in the market. It cuts the paper into approximately 40 thin strips, which can be easily reassembled and decoded. P-1 and P-2 DIN 66399 classes utilize this cut.
- P-1: Uses the basic cut style, with the paper shredder cutting the pieces into strips that are one-fourth of an inch wide. This is the lowest security level and is suitable for paper with general information and advertisement.
- P-2: The shredder cuts paper into long pasta-like strands about one-eighth of an inch wide. You can use it for paper with expired and non-sensitive information.
The cross-cut is a middle-level secure paper shredder. Cross-cuts involve twin-blades that slice the documents both lengthwise and widthwise. The paper strips are tinier and harder to piece together. A cross-cut shredder can also crush credit cards, CDs, and flash disks. P-3 and P-4 level shredders use this cut.
- P-3: The secure cut is suitable for confidential non-sensitive information such as personal emails and everyday paperwork. It cuts the paper to an average of 200 strips.
- P-4: The secure paper shredder utilizes a super cross-cut that chops the paper to approximate 400 tiny pieces. It is perfect for sensitive business paperwork with proprietary information.
Micro-cut is the highest security cut used for highly sensitive and confidential paperwork. It works best for financial institutions, government contractors, and military agencies. The highly secure paper shredder cuts documents in minuscule particles that are practically impossible to recreate.
- P-5: The first level micro-cut shredder shreds paper to about 2,000 pieces. It is suitable for use in financial and accounting firms.
- P-6: Level 6 shredders cut paper to a maximum particle size of 10mm2. Level 6 shredding is suitable for extra-confidential documents such as research and product development files.
- P-7: It is the highest security level, with approximately 15,600 shreds per page. The ultra-secure paper shredder is appropriate for government agencies, military, and DOD contractors.
The paper particle size after shredding determines the security level of your commercial paper shredder. Strip cuts are the lowest level shredders with micro-cuts being the most secure industrial shredding machines. Capital Shredder stocks different brands and models of secure paper shredders that can fit your security needs.
Best Paper Shredders 2021 | Reviews by Wirecutter
The Amazon Basics 8-Sheet High-Security Micro-Cut Shredder with Pullout Basket typically costs more ($5 to $25 higher at this writing) than competing eight-sheet micro-cut shredders, but it’s worth the investment. Whereas some other tested shredders jammed or emitted a burning smell after a few minutes, the eight-sheet Amazon Basics ran trouble-free well past its five-minute run time as we continuously fed it batches of paper—it tore through about 360 pages (or 90 four-page credit card statements) before the bin was full. Like other micro-cut shredders, this Amazon Basics shredder chomps documents into tiny shreds measuring around 5/32 by 15/32 inches, making any sensitive paperwork all but impossible to reassemble. It can handle old plastic credit cards, as well, and it has a separate slot for data DVDs, which is helpful for reducing wear and tear on the main shredder gears. Though this model is slightly bigger than eight-sheet shredders with lift-up tops, it still fits under most desks, and we think the pullout bin and wheels are conveniences that make it easier to keep up a shredding habit. After all, a cheaper, more frustrating shredder isn’t worth the savings if you never use it and just chuck your crumpled bank statements into your recycling bin.
If an eight-sheet shredder won’t cut it because you constantly have large stacks of sensitive documents to dispose of, the Amazon Basics 12-Sheet High-Security Micro-Cut Paper, CD, and Credit Card Shredder with Pullout Basket is the upgrade model to get. As the name indicates, it can handle four more sheets at once than the eight-sheet Amazon Basics model, and it has twice the rated run time—10 minutes versus five. (In our tests, both shredders ran for about three minutes longer than their rated run times before their bins got full.) That might not sound like much of an improvement, but the increase in both capacity and run time means you can shred more paper in a single session. The spacious, 5.7-gallon bin also means you won’t have to empty the bin as often as you would with lower-capacity shredders. Unlike the eight-sheet model, this 12-sheet shredder doesn’t have a separate slot for destroying discs—but these days, that’s not likely to be an issue for most people.
If you have light shredding needs—for example, you get most of your statements and other paperwork digitally—the Amazon Basics 6-Sheet High-Security Micro-Cut Paper and Credit Card Home Office Shredder is the best option for occasional use at home. This shredder ran for six minutes—double its rated run time—before needing a cooldown break, and it even plowed through stacks of eight pieces of stapled paper. (We recommend shredding only a couple of pages at a time, though, to avoid jamming and overworking the shredder.) It’s a bit noisier than our other picks, and the pull-off top means more cumbersome bin emptying, but this smaller shredder is more affordable, and it shreds pages to the same itty-bitty pieces as its larger siblings do.
Royal: Royal 85x Confetti Cut Paper Shredder
Perfectly designed to boost home office security, the Royal 85X shredder is able to process up to 10 pages at a time, reducing documents to 1/8″ x 1″ confetti bits. The heavy duty steel cutters also accept credit cards, staples and small paper clips. The shredder shuts off and alerts operator if a paper jam occurs, the door is ajar or the wastebasket is full.
Equipped with a 9″ paper entry, the 85MX easily accepts standard letter or legal size documents. The automatic start-stop design ensures quick, easy shredder operation, and supplies a one-touch reverse function. The unit includes a fully enclosed pull-out wastebasket, designed to keep the shredded bits well contained until you”re ready to empty the bin. Its cabinet stand includes rolling casters.
What”s in the Box:
85 MX shredder, wastebasket, power cable, cabinet stand with rolling casters, printed user”s guide, warranty card
ROYAL 14405X 85X Heavy-Duty Shredder with Pull-Out Bin Shreds 10 sheets in a single pass ; Accepts staples & credit cards .125″ x 1.375″ ; Crosscut shreds for higher security than;strip-cuts ; Auto start/stop ; Steel-gear ;construction ; Jam-free rollers ; 14.5-liter ;pull-out waste bin ; Console base on rolling casters ; 1-year parts warranty 85X Heavy-Duty Shredder with Pull-Out Bin
Maximum number of sheets: 10-12
Number of speeds: One
Shred size: 1/8″ x 1″
Recommended daily use: Yes
Entry width: 9″
Power source: AC adapter
Power cord length: 8”
Auto start/stop: Yes
Weight: 20.4 lbs shipping weight
Warranty: One year on parts; 90 days on labor
In the box: Wastebasket, shredder, user”s guide, warranty card
How to Choose Between a Strip Cut and a Cross Cut Shredder
Paper shredders give both security and organization benefits. Do you need a paper shredder, but don’t know where to start? Here are ways to tell if you need a strip cut or a cross cut shredder.
Have you ever had a missing credit card or document? Have you ever thrown a perfectly readable bill in the trash bin?
If you answered yes to either question, you’re vulnerable to identity theft. Around 17.6 million Americans were victims of identity theft in 2014 and the numbers continue to rise. You too could become a victim if you don’t start protecting yourself.
How can you start protecting your identity? One simple step is to start shredding your important documents, rendering them unreadable.
Let’s look at the two most common types of shredders: cross cut shredder and strip cut shredder. Learn the differences between the two and figure out which one is right for you.
Cross Cut Shredder vs Strip Cut Shredder: Factors to Consider
Both machines shred paper, making the text indecipherable, so any of the two should be fine, right? Not really.
There are distinct advantages one has over the other, and the right choice of a shredding machine boils down to your preferences. Read the following factors that might affect your decision:
A strip cut shredder cuts papers into strips about 3/32″ to 1/2″ wide. The end result is ribbons made of paper that can be hard to put together again. It would be possible for the machine to churn out strips of paper that are the same length as a continuous sheet.
On the other hand, a cross-cut shredder cuts the paper lengthwise and crosswise. The size of the cut up pieces of paper varies from 5/16″ x 3″ to 1/32″ x 3/16″. The end result is confetti-like pieces of paper at about 300 to 900 tiny bits, depending on the size of the cut.
A strip cutter is better in an environment where the speed of shredding is paramount. Because shredding papers into strips are more straightforward, a strip cutter churns out shreds of paper faster than a cross shredder. Confetti shredders cut a paper in multiple directions, slowing down the process.
In this regard, a cross cut paper shredder beats strip cut shredders completely. A dedicated thief can put together strips of paper again with the right technology, allowing others to access sensitive information.
Meanwhile, pieces of confetti are much harder to reassemble even if the thief has a lot of time because it is almost impossible to connect one piece to another. Not to mention that there are hundreds of pieces in a single paper mixed in with other shreds from more papers.
A single piece would also hold very little information since it will only have a few letters or parts of one, depending on the size of the cut, while a strip of paper might reveal some secrets.
If the price is an issue, the strip cut shredder is the cheaper of the two. An individual can have one for their office or home at very little cost, which makes it great as an entry-level device.
Cross cutters are more expensive simply because they have more complicated parts to be able to shred a paper into confetti. They also offer better security, which adds to their value.
Do note that the price doesn’t only depend on the price but on the model and brand as well. You might find a cross cut shredder that might cost the same as an expensive strip cut shredder, which might erase the price factor from the equation.
The maintenance for both types of shredders only needs oil for you to ensure they’re working at their optimal performance. However, the parts of cross cut shredders are more complicated and higher in number than strip cutters, which makes the cost of maintenance higher than the other option. A cross shredder does extra work; hence they’ll need more frequent oiling.
The exact amount and steps of maintenance you’ll need to do should be in the manual. Before purchasing a shredder, we also recommend asking about its maintenance to make sure you’re up to the task.
Confetti-sized pieces of paper take up less space in the bag than strips of paper, even if both shredders ate the same amount of paper. This lowers the number of times you’ll have to change out the bag from the shredder.
Although it’s not the biggest factor to consider, think of how much time you or your employees can save just by having to change the bag less frequently. Moreover, changing a bag can easily lead to shreds of paper on the floor if you’re not careful, so fewer changing also means less risk.
Cross Cut vs Strip Cut: Which One is Right for You?
A strip cutter is the basic and most common type of shredder. It can be enough for those with a tight budget and it might even be more than enough if you plan to use it solely for personal reasons.
Students who need to get rid of old exam papers and assignments can settle for this type, especially if they need to shred a huge amount of old schoolwork regularly. Keep in mind that you have to shred schoolwork too, because some thieves can still use this information to hack into financial accounts.
However, a cross cut shredder is the choice of many businesses and individuals that deal with extra sensitive materials. The shredded paper will almost be impossible to reconstruct, making it harder for a thief to obtain sensitive information by snooping in garbage cans.
Even home users who want to take the extra step of making sure their documents and information are safe may opt for cross-cutters. Mail from financial-services companies, like convenience checks and pre-approved credit cards, are especially susceptible to thieves.
Tax documents and bills are very sensitive as well, so it’s worth disposing of everything that has your name and other info on it properly. Experts suggest getting a cross shredder for this reason.
Theft is Serious Business
Now that you’re more knowledgeable in two types of shredders, you can now decide in confidence which one fits your needs better. Remember that shredders are vital for preventing information leaking to outsiders, whether it’s personal or business data.
If you’re ready to buy a strip cut or cross cut shredder, visit us today and look at our wide array of models that fit any budget. Check out our shredders!
May 30th 2018 Monroe
Fellowes 99Ms Paper Shredder Confetti Cutting 23 cm Black 4609101
90,000 How to Choose the Best Commercial Shredder?
Some of the most important things to consider when getting a commercial paper shredder are privacy and bandwidth.Typically, you should look for a shredder that can shrink documents so much that they cannot be recovered. Common home and office devices often create a series of vertical or horizontal cuts, but a commercial paper shredder usually offers a cross-cut or confetti option. The volume of documents you will be shredding is also important, as the best commercial paper shredder for the office environment may not be suitable for larger industrial applications.Shredders often have a maximum number of documents they can accept at the same time, as well as other physical limitations imposed by the size of the device and the power of the engine.
Most basic shredders are called straight shredders and have a series of blades that will cut the document vertically or horizontally. This can protect information from accidental reading, although it is often not sufficient to ensure business confidentiality. Documents that are cut into uniform strips can be reassembled with sufficient time and effort to prevent destruction.Choosing the best commercial paper shredder often starts with finding a device that can defeat such an activity.
Cross cut grinders typically include perpendicularly opposing blades that can make a series of both horizontal and vertical cuts. This can result in thin, short scraps of paper from which it is difficult to obtain any useful information. Confetti shredders work in a similar way and can reduce documents to tiny scraps of paper.An even safer method of grinding is called microcutting, which results in pieces so small that it is almost impossible to get information from them. Choosing the best cutout type will depend on how important information security is to your business.
The volume of paperwork you will need to shred regularly can also help you make a decision when choosing the best commercial paper shredder. Small office units are usually top-fed and collect shredded paper in a bin.One or more of these might be enough for day-to-day office use, especially if it saves a lot of time to enable people to shred documents at their desk.
Larger commercial paper shredders are also available if you need to throw away large volumes of documents on a regular basis. These devices vary greatly in design and can use stack feed, hopper bucket, or a variety of other methods to automatically dispose of documents.A large commercial paper shredder can often meet the needs of an entire business and can place shredded documents in disposable plastic bags or other convenient options.
[Page 2/3] – User’s Manual: FELLOWES MS-460Cs
Shreds: paper, credit cards, CD / DVDs, 3.5 ”floppy disks and staples for
Does not crush: endless forms, adhesive labels, transparencies, newspapers,
cardboard, paper clips *, laminates and non-listed plastics
Size of pieces of paper:
Cutting into confetti…………………………………………… ………………………………………….. … 2 x 8 mm
Fragment size of cards / CDs:
Cutting into strips ………………………. ………………………………………….. …………………………….. 8 mm
* It is not recommended to use this shredder for shredding paper clips.
Sheets per pass (Cutting into confetti)…………………………………………… ……………………….. 10 *
Cards / CDs per pass …………………………………… ………………………………………….. ..1
Paper Width ……………………………………….. ………………………………………….. …………. 222 mm
Card / CD width ……………………………………. ……………………………………. 125 mm
Time of continuous operation…………………………………………… ……………………….. 10-12 minutes
* A4 paper (70 g / m
) when powered from a 220-240 V, 50 Hz network, MS-460Cs – 2.4 A; higher density
paper, high humidity, or a deviation of the supply voltage from the rated value of
may reduce performance. Recommended daily load: 50-100 passes of
shredding paper; 25 cards; 5 CDs / floppy disks 3.5 “.
Fellowes SafeSense® shredders are designed for use in the home or office environment at
temperatures between 10 – 26 degrees Celsius and 40 – 80% relative humidity.
Az érzékelő kigyullad
Érintse meg a tesztelési területet
Opening for loading cards / CDs / floppy disks 3.5 “
Shredder cutting block
SafeSense® manual override
Ready for operation (green)
SafeSense® indicator (yellow)
Advanced security technology! The SafeSense® function stops chopping if your hands are too close to the feed opening.
See safety instructions below
– For testing SafeSense® technology
Nyomja meg az Automatikus
bekapcsolás () gombot
• Keep children and animals away from the chopper. Keep your hands away from
loading aperture. Unplug the shredder when not in use
or turn the switch to the Off position.
• Do not accidentally drop foreign objects – gloves,
jewelry, clothing, hair, etc. – into the loading apertures
shredders. When an object hits the upper opening, switch
device in reverse mode (
) to retrieve the item.
• Do not use aerosols, petroleum based lubricants or other
flammable substances near the grinder. Don’t point to
compressed air grinder.
• Do not use shredder if damaged or defective. Do not disassemble
chopper. Do not install near or over heat sources, water.
• Requirements for operation, maintenance and repair are stated in
in the instruction manual. Before using the shredders, you need
Read the entire instruction manual.
• The shredder is equipped with a power supply switch So that you can use it
chopper, this switch must be in the ON (I) position.In the case of
In an emergency, set the breaker to the OFF (O) position. It’s
will immediately stop the chopper.
• Do not touch open knives under the cutting unit.
• Do not allow foreign objects to enter the loading opening.
• The shredder must be connected to a properly grounded wall
power outlet, voltage and current in which correspond to those indicated on the marking
A grounded power outlet must be installed in an easily accessible location close to
with device.It is forbidden to connect this device to the mains through converters
energy, transformers or extension cords.
• FIRE HAZARD – DO NOT shred greeting cards with
sound microcircuits or batteries.
IMPORTANT SAFETY INSTRUCTIONS – Read Before Use!
90,000 What are shredders used for? – News of Vladivostok and Primorye (16+)
Shredder is a device for shredding (mostly confidential) paper documents into (unreadable) particles.The paper shredder shreds documents using a set of rotating cutting blades powered by an electric motor. The particle size of the paper depends on the type of paper shredder. Shredders are divided into strip shredders, cross cut shredders and micro cut shredders. A paper shredder can turn your papers into long strips or tiny confetti-sized scraps of paper.
The capacity of the paper shredder complies with the official safety standards DIN 66399.This German standard for shredding paper covers safety levels from DIN P-1 to DIN P-7, the higher DIN rate resembles a smaller particle.
The very first paper shredder was invented by prolific inventor Abbot August Lowe of Brooklyn, New York. His invention “waste paper container” was patented on August 31, 1909. But the invention of the “first paper shredder” was never registered.
The first manufactured shredder was produced by Adolf Echinger in 1935 in Germany.At that time, paper shredders were mainly used by government agencies. In the late 1980s, consumers and businesses also began using paper shredders to avoid identity theft.
Which brand of shredder to choose? There is no better brand. Some brands specialize in making basic consumer shredders, others make really good office shredders, and there are brands that are really good at making large industrial shredders.
Not all shredders produce the same cut. In other words, not all grinders produce particles of the same size. This is why paper shredders are divided into three types to distinguish them from each other: strip or tape cut, spaghetti or straight cut, cross, or confetti, or diamond, micro cut, or partial cut, or safe cut.
It is recommended to use a cross cut or micro cut shredder for shredding confidential documents.This is a safety level DIN P-3 or higher.
Device and types of shredders
Dear readers of the newspaper!
We are all going through difficult times right now. The crisis has affected all areas of life, including the already difficult situation for independent media outlets that are still going out in the form of “paper” editions. We are forced to turn to you for help, because we do not have sponsors and exist only at the expense of the money that our loyal fans pay for the newspaper.Independence in our time is not cheap, and the cost of publishing a newspaper is constantly growing – together with them, unfortunately, are growing debts to the editorial staff and authors, thanks to which “Top Secret” still exists in the form in which you value it and we love. Any of your help will be very welcome, and the founder guarantees that it will be directed solely to paying off considerable debts to the newspaper’s collective of journalists and technical specialists.
If you do not mind providing such assistance, then by scanning this QR code in a mobile application, for example, Sberbank (pay by QR code) or any other application of any bank that supports payments by QR code, you can make a donation for any amount acceptable to you, from which your budget will not suffer – we will be very grateful to everyone, regardless of the size of the donation, and we will report on all voluntary assistance received from you.
Open (run) the banking application, scan the QR code by selecting the “payments by QR code” menu item and pointing the camera at the QR code, enter the donation amount and make the payment.
E-mail of the editorial office: [email protected]
Tel./fax of the editorial office: +7 (499) 288-00-72
Advertising department: +7 (499) 288-00-72
reklama @ sovsek.com
Distribution Department: +7 (499) 288-00-89
* Extremist and terrorist organizations banned in the Russian Federation:
Right Sector, Ukrainian Insurgent Army (UPA), ISIS, Jabhat Fath ash-Sham (formerly Jabhat al-Nusra, Jabhat al-Nusra), National Bolshevik Party (NBP), Al-Qaeda, UNA-UNSO, Taliban, Mejlis of the Crimean Tatar people, Jehovah’s Witnesses, Misanthropic Division, Korchinsky’s Brotherhood, Artpodgotovka, Trident im.Stepan Bandera “,” NSO “,” Slavic Union “,” Format-18 “.
Founder: LLC “Top Secret Trade”.
Legal address: 127247, Moscow, Dmitrovskoe sh-e, 100, building 2.
Mailing address: 127247, Moscow, PO Box 72.
General Director: Andrey Korablin.
All rights reserved. Copying and use of materials is prohibited, partial citation is possible only on condition of a hyperlink to the site.
Hydrangea paniculata Confetti (Confetti)
Hydrangea paniculata Confetti – variation with two types of flowers (fertile and sterile) in inflorescences. The shade is white-green at first, over time the petals turn pink.
Panicle hydrangea is widely used in landscape design to decorate park and coastal areas, summer cottages. Well suited for creating low hedges and flower alleys.Suitable for both single and group plantings.
Hydrangea paniculata Confetti is a slender bush 200-250 centimeters high.
High frost resistance.
Fertile, well-drained soils without stagnant water are best suited. Sour to slightly acidic reaction.
The ideal time for planting is early spring. Desirable landing in partial shade in a place protected from the winds.
After filling the hole with a mixture of earth, peat, humus and sand, taken in equal amounts, the plant should be watered, and the near-stem circle should be mulched with sawdust or peat.
Young shrubs need abundant watering and fertilizing. No garter needed.
In general, hydrangea is unpretentious, but responds well to care.
Annual spring pruning required.
Diseases / pests
It is worth carrying out preventive treatment against aphids, spider mites and rot.You can get rid of chlorosis by burying a metal object next to the roots.
Color – light brown. Stems are smooth, straight, slender.
The leaf plates are pointed, smooth, with a prominent vein.
Flowers at first white-green, eventually turn pink.
Inflorescences are loose, formed by two types of flowers: sterile and fertile, which makes the brushes look unusual.
The plant blooms from July to mid-September.
BoneCrusher 700 food waste disposer, 372×182 mm, 2600 rpm
GET DISCOUNT FOR A POLL!
Choose a kitchen by answering only
7 questions and get a discount from the manufacturer.
Choose a kitchen
Design project free of charge
Leave your application right now and get a free design project.
Gifts for each client
When buying a kitchen, you will receive a stone sink as a gift until the end of the month
from 1 to 30 September
No interest! Buy furniture in installments without overpayment for up to 1 year.
The BoneCrusher 700 food waste disposer can once and for all rid your home of the problems of accumulating and storing household waste in the bin, unpleasant odors, insects and the spread of bacteria. The remains of food, vegetable and fruit peelings, fish, bones, nuts and many other waste is enough to dump directly into the grinder, which is attached to the sink drain pipe. Waste is thoroughly and quickly grinded and flushed down the drain together with water.The device is equipped with three levels of shredding, depending on the size of the garbage. You can always buy the offered shredder in the stores of the Leroy Merlin company.
- ease of installation;
- silent operation;
- protection against rust.
|Country of origin:||China|
|9047 Height, mm:||372|
|Number of revolutions, rpm:||2600|
|Grinding chamber volume, ml:||1100|
|Built-in pneumatic switch:||yes||3|
The rich and luxurious palette of countertops creates a surprisingly naturalistic ambience in the room.Modern flooring with imitation of natural stone or wood allows you to transform the kitchen space, make it cozy and presentable.
Our factory is specialized in selling quality artificial stone countertops. We have presented a wide variety of coverings for kitchen units in various designs. All products have certificates and necessary documentation. The presented products comply with the provisions of GOST and sanitary and hygienic requirements.
Advantages of our worktops:
• Seamless construction. Due to the fact that the product lends itself to grinding, the joints can be made completely invisible.
• Presentable look. Imitation of natural stone and rich colors show luxury and nobility.
• High strength. Products have increased strength and durability, are not afraid of the effects of an aggressive environment.
With our artificial stone worktops, you can realize various ideas in the field of kitchen interior decoration.We will be happy to help you choose a reliable coating for your work area!
See all worktops
High-quality, modern fittings provide the required functionality. Imported kitchen furniture components greatly simplify any work in the kitchen. Time-tested models will provide a long service life of furniture sets.
Our company is pleased to offer reliable fittings from the manufacturer.We have the richest variety of accessories for mixers, kitchen sets and other furniture items. All products are fully certified and quality tested. All products have warranty documentation.
What do we offer?
• Roof rails.
• Drawers with door closers.
• Cutlery containers.
All fittings comply with approved quality standards and sanitary and environmental norms and rules.All mechanisms and components are made in different styles. The accompanying elements differ in size, design, coating quality.
With our kitchen products, all kitchen systems will function efficiently and reliably. Every minute in such a kitchen will bring real pleasure. All products have good moisture and wear resistance.
Provide maximum comfort and convenience in your kitchen with our components and accessories!
See all fittings
Stylish, beautiful facades allow you to transform the appearance of the home, make it more presentable and rich.A rich variety of color solutions allows you to choose the most suitable facing elements for arranging a kitchen set.
We sell luxurious facades of the highest quality of various shapes, colors and designs. We are ready to offer models of standard and non-standard configuration, depending on the features of kitchen systems. All structures are manufactured on specialized machines, which eliminates rejects and possible defects.
Why place an order with us?
• Rich choice. We offer products of various colors.
• Perfect quality. All facades have certificates and necessary documentation.
• Professional installation. We organize delivery and installation of a turnkey structure.
• Reasonable rates. We offer products at the factory price without extra extra charges.
Choose the best structural elements and accessories for the furnishing of a kitchen set in the “Milana Kitchens” company.We will be happy to provide the necessary advisory and technical support.