Portable desk dividers: Portable Room Dividers | Portable Partitions Dividers On Wheels


Best Desk Dividers for Students

Be it the pandemic or just sheer privacy, a desk divider is a must-have for students. Not only does it give you some more privacy and safety, but you can also focus on work without distraction from the outside world with ease.

The desk dividers on this list were comprised on the basis of the quality of the product, its durability, style, design and a couple of other components we’ve looked out for to get the best products on the market for you.

Hope you enjoy reading the rest of the article while also gathering some valuable information.

This multi-purpose and clear, portable counter protects you employees in libraries, colleges and school. Reduce Exposures to people coughing, sneezing and spraying droplets from their nose or mouth. Keep the distance.

With the foldable design, it can be folded to save your room when not in use and easy to move from place to place. The thick 3MM Acrylic Plexiglas Acrylic resin shield is for transparency and is resistant to impacts that can cause shattering as well.

Easy to install and no tools required. Freestanding countertop design does not require permanent installation or additional hardware.


Stylish and useful, this shield is a three-panel corrugated plastic privacy shield that is printed with a whimsical school supplies pattern for an elegant touch.

This divider is a must-have for students because it helps eliminate distractions in the classroom or at home. The sides are high enough to help students focus, but low enough for you to easily monitor the surroundings around you.

This privacy shield/divider is built to last. Made with sturdy corrugated plastic to withstand daily use on students’ desks and tabletops, it also folds up into thirds for easy storage and to carry it around. The plastic surface hinders defacement and can be quickly and easily wiped clean.


This classroom divider uses the same tried and tested design that has made the Earthables Privacy Shields so popular among schools. The guard is made from thick corrugated plastic with designated windows on the front and sides. The windows are made from PET material instead of the commonly found PVC on other products, which is much more environmentally friendly.

The corrugated plastic is made of is an extremely durable material and has been specially designed for use in classrooms. This material is not prone to cracks and there is no risk of sharp edges being exposed. The shield can be wiped down and sanitized after each use for added safety.

There have been certain improvements to the design by making the base of the shield thicker which helps it stand up better on desks and tables, the windows are made from an environmentally friendly material and the added handles are there for easy carry and storage.

Safety being the top priority, each sneezeguard sports rounded upper edges for student safety, folds up flat and is easy to carry thanks to built-in handles.


Pacon’s Desk Divider is made from sturdy polished wooden panels with a certain touch of elegance along with the comfort of privacy and no out distraction to bother you while you work.

This divider is perfect for a table, desk, and other areas to keep students focused and eliminate distractions while they study. It is an affordable solution to create private workstations in open-concept offices or as a sun shield for laptops or to work on in a library or class.

The board is made with sturdy corrugate material so they’re reusable and environmentally friendly. This divider provides excellent value with four shrink-wrapped boards, coloured black on each side.


BYLMD’s portable plastic shield is designed to protect students and is one of the best barrier protection during these difficult times. It can be used as a desk protector and will make sure the safety of the students.

This shield comes with 4 Velcro’s to stick between the desk and plastic shield for better support and stability. It will not fall from the desk despite being lightweight and it can be carried easily or fitted in a backpack from home to school or office. The installed handle design helps carrying it.

Made of high-quality plastic and durable 100% clarity material, it can be cleaned after using the equipment by applying a significant amount of alcohol and wipe.

These desk dividers are made from soft clear plastic with hard steel skeleton edges which makes them more durable than their counterparts. The surface stripe has a brushed design, so it has high impact resistance and yet is very safe to use anywhere.

Whether it is students attending classes or employees’ work, they can be well protected and can work in peace. It is completely transparent, so it does not affect visibility or interactivity.

Installation takes less than a minute with no tools needed. Anyone can easily install and move, while the non-marking glue will not leave traces on the desk either. Since this is clear plastic, any pen/pencil markings on them can be cleaned with a wet towel.

This study station is an acoustic desktop divider with a partial enclosure, which sits on top of the desk or table providing privacy in school, work or office.

The study station’s acoustic 100% recycled polyester fibre (PET) felt absorbs sound in open spaces. Reducing noise has been proven to be effective in decreasing distraction and increasing productivity.

The divider slides together in seconds and breaks down to lay flat, no tools required. This divider can easily be removed from the workstation and relocated, causing no damage to furniture. The station can fit into any workspace and is wide enough to accommodate most laptops/tablets or a book/notebook.


Pacon’s round table desk divider comes with enough dividers to create 4 or 6 stations which is ideal for a round table and when there are a bunch of friends trying to study together.

The divider is made of sturdy corrugate and is perfect for round tables in classrooms and computer areas as well for utmost privacy. The product is easy to assemble and store and helps keep students focused, less distracted and helps to prevent wandering eyes.

GuardMate’s professional-grade acrylic plexiglass barrier is a great way to protect yourself or incoming with third parties visitors as well.

The acrylic plexiglass shield is made of Grade-A thick acrylic which can withstand high impact and is shatter resistant. The acrylic panels are perfectly clear for visibility and are made for long-lasting durability.

Easy to assemble and made with rounded edges for safety, it comes in multiple sizes. This product requires no tools for assembly. Dual lock-in base on both sides for stability for desk shields.


Partition Walls & Panels For Separation

Partition walls are foldable fixtures that are used to divide space within a room. These partitions come in a wide variety of sizes and styles. If you are an office manager, run your own business, or are a homeowner or renter that wants a more organized living or workspace, then partition walls are for you. Privacy partitions dividers can create privacy and declutter a space, as well as organize a room.

It can be distracting when you are working from home. One solution is to section off working spaces, using partitions panels for both your room and for the table or desk.

Using a folding wall dividers creates a discrete space where you can let your family and roommates know this is a work zone. In this area, you are declaring that things must be kept neat, you are not to be distracted, and that you control this space for the purposes of work. This also helps your at-home partners as well – other spaces are not work zones and are for other household activities. Using wall partitions can help roommates and families create organized zones for work, family, and play. Partitions also help keep down the noise. Since a wall partition is portable, at the end of the day these partitions can be folded up, announcing an end to the workday. Partitioning walls that fold and then can be stored are a great option for homes and offices.

Portable Privacy Screens

Partitioning panels have been used for centuries as a means of providing privacy for changing, creating sectioned off spaces for storage, or for establishing boundaries and spaces in rooms. The terms “portable privacy screen” and “portable room divider” are often used interchangeably, but here we will use the term to mean using a partition wall to create personal privacy spaces. Portable office walls for home and business use has been used for millennia as a means to control space and traffic flow.

In combination with the work-from-home station, portable privacy screens can be used to create a bookshelf concept. Combine your partitioning screen divider with a bookshelf or filing cabinet and create a place where documents are stored, while also dividing off space from the rest of the room, to create an office style space. The same kind of setup can be used with a vanity and clothes drawers, for a set up that is similar to a classic dressing room.

 Portable Room Dividers

Working on a larger scale, portable and collapsible room dividers can create for you rooms within rooms. A room divider can create a play space for your kids. In an office setting, two room dividers, a couch, and a console can create a video game play area for your employees (or guests!) who need to destress.

Divider panels can surround a table and chairs so that your team now has a private meeting area. Portable room dividers are also great for use in the bedroom, to set up a temporary dressing area.

The uses for room dividers are nearly limitless and allows you to create ad hoc spaces which your business or home need for special events or day to day activities.

Partition Walls For The Home

Privacy partitions come in a all manner of styles. Partition walls for home use are more often translucent or transparent, since parents want to keep their eyes on their kids and natural light is healthy for a home. This is in contrast to the darker tones and solid colors for partitions found in offices. Home partitions also tend to have smaller dimensions, since homes are overall smaller spaces compared to large offices. However, these are not hard and fast rules.

Partition Walls For Offices

With open floor office plans so much in vogue, using partition walls in offices represents a different set of challenges. Workers often have a desire to set up their own personalized spaces, and having this control leads to greater productivity. However, as is shown in cutting edge offices such as that at Bloomberg Center, the need to be flexible with space and privacy is critical.

Joining a large group of partition walls together can create entire temporary office sections for temporary working groups. These can be assembled or taken down at will, depending on the needs for a particular project or team. These will be more solid partitions that will be made of materials that will allow for the easy hanging of file holders, jacket hooks, and whiteboards. This flexibility enables businesses to support their teams with the privacy that they need and to create the spaces that enable productivity.

Versare helps you create the space you need. We work with businesses and homeowners and supply the best in partition wall products. Let us answer your questions about creating the best living and working spaces possible.

Privacy Screens & Sneeze Guards

Frosted Desktop Partitions Offer Extra Privacy in Open Plan Offices

Current trends are pushing more and more businesses towards open-air workspaces. The thing is, not every employee is alike. Some prefer the exposed atmosphere while others wish to have their own sense of space. Privacy screens for office desks can help bridge this disparity. If your workplace has already made this transition, all hope is not lost for those wanting extra partitioning. Our privacy screens for office desks come with a frosted glass finish that lets light through while providing a boundary. However, unlike cubicle walls, their low height still encourages convenient interaction in open environments. These privacy screens are very affordable and come in lots of sizes to accommodate a coworker’s needs.

What are my options for purchasing a desktop divider for my workspace?

  • Each screen is 1/8″ thick and manufactured from tempered glass for safety. The side facing out features a frosted surface and the side facing in has a polished finish.
  • The partitions are also compatible with dry erase markers (on the glossy side only). While seated at your desk, its write-on capability provides a quick way to jot down notes and numbers while helping to alleviate paper waste.
  • We offer the glass panels in three heights and lengths. Vertically, choose your desired height in 3″ increments. Lengths are available at 24″, 30″, and 48″.
  • Each screen comes with two mounting clamps which are designed to mount with screws permanently. They’re fabricated from zinc alloy and fasten to work tables or desks. Their chrome polished finish pairs well with the frosted appearance of the glass.
  • While they don’t block out all office distraction and/or noise, the screens still make a discernible difference. They mask movement from your peripheral vision, helping to improve concentration and productivity.

What measures can I take during times of social distancing?

  • Acrylic sneeze shields and splash guards provide an extra barrier of protection when necessary. Countertop models are available in modular and knockdown styles for quick and easy setup and takedown.
  • If you need to interact with people trying to pay with credit cards, for example, we have sneeze guards with pass-thru openings at the bottom. A keypad extender also allows people to pay for their items while maintaining a safe distance from the employee.
  • Another option is the ceiling hung shield. These acrylic panels come with pre-drilled holes for adding hanging chains or lines. This style is very useful when there is no counter space to accommodate a free-standing guard.

For many office workers, they view the open work plan as benefiting the company rather than the employee. Floor space is maximized with less overhead shelled out for individual cubicles. This business model may be attractive to some, but it all comes back to the fact that every employee is different. We believe in offering people a helpful solution if placed in that type of work environment. All our privacy panels are stocked for same day shipment and priced most affordably. Compare these prices to our competitors — and theirs are acrylic plastic, not glass!

Desk Divider – Screen ED®


Screen-ED Classroom Desk Dividers are being used across the country in 21st Century Classrooms.

Innovative learning spaces, as described by the NSW Department of Education, are designed to:

  • Be mobile, flexible, varied and connected
  • Support opportunities for students to learn independently and in small and large groups
  • Support collaborative learning and teaching for students and teachers
  • Provide students with choice in where and how they learn
  • Adapted to accommodate learning modes and technology
  • Provide optimum learning conditions such as temperature, light and acoustics

Screen-ED™ is a portable acoustic classroom desk divider which has been specifically designed to create (temporary) individual workspaces. These desk dividers are the perfect solution for dividing up large shared desks.

These classroom desk dividers have also proven to be useful in multiple other classroom settings:

  • Special – ED teachers make use of these classroom dividers to aid students who may find them selves in an “all-inclusive” classroom settings. The desk dividers are especially helpful to students who are easily distracted and struggle to focus on the task at hand.
  • Exam dividers in the classroom or in the computer lab for testing and assessments.
  • Keep a set in the library for students to use when it is time to study.

Designed and made in Australia from imported materials

Care Instructions: Remove spills immediately using damp, clean cloth. Carpet and fabric cleaners can be used. Always test in an inconspicuous area first.

Screen-ED® is available in a variety of colours. (Navy/Grey colours recommended in schools to hide pen marks and dirt)


DESIGNER: Mumble®  By Design: Australian Registered Design No. 201714159

CATEGORIES: Classroom Desk Dividers and Exam Dividers, Homeschooling Solutions

PACKAGING: 1 screen per carton

COMPOSITION: 100% PET (60% recycled) and is fully recyclable

AVAILABLE OPTION: Whiteboard surface on one side – see Screen-ED® WRITE

WEIGHT: 0.8 kg per box

DIMENSIONS: 393mm (h) x 476mm (w) x 9mm (d) (24mm d feet)  [Size can be customised upon special request]

SOUND ABSORBTION: Intertek ISO354: 2003 NRC VALUE: 0.80

FIRE TESTS: Early Fire Hazard Properties (AS/NZS 1530.3)/ASTM E84 A Level/EN 13501-1 B Level

LOW VOC: Materials are non-toxic, non-irritant and odourless/Oeko-Tex 100

Office partitions in Moscow from 100peregorodok

Stationary office partitions.

Fixed partitions are structures that can be installed only once. Unlike other types, for example, mobile partitions, the installation of such partitions is carried out tightly. Dismantling of stationary structures leads to their complete destruction with the impossibility of assembling these systems in a new place in the event of an office relocation.

Stationary partitions are also a very common type of partitions due to their lower cost, since all the material for assembly is disposable.

Stationary structures with matte film

Stationary glass partitions

All-glass office partitions.

All-glass partitions are a kind of glass partitions. Generally speaking, all-glass partitions are now used in a modern office. The old glass partitions had a lot of glass sections made of different glass, all of which were mounted together, and the result was a not very attractive design.

Modern office partition glass systems are assembled from large all-glass sections, which are usually floor-to-ceiling high. They use tempered, laminated glass, which has not only greater strength, but also has increased sound insulation. Usually such partitions are called all-glass.

Another distinctive feature of all-glass partitions, which fundamentally distinguishes them from glass partitions, is the absence of a profile during installation.The partition profile is where the partition sections are attached. In the case of glass partitions, glass acts as sections, in the case of deaf ones, it can be any opaque material, the most used are drywall and chipboard. Metal is used as a profile – steel or duralumin, or various types of plastic. So, in the case of all-glass partitions, there is no profile, and instead, special plastic clips are used, into which all-glass sections are installed.

All-glass frameless partitions

All-glass partitions with swing doors

Mobile office partitions.

Mobile office partitions are convenient because they can be reused. Unlike stationary partitions, which can be assembled only once, mobile phones are designed for multiple assemblies.In this sense, mobile partitions can be compared to office furniture.

The convenience of using mobile partitions is that in the event of a company moving to a new location, there is no need to buy new partitions to delimit office space in a new location – it is enough to disassemble the old mobile partitions and assemble them at a new location. There may also be situations when the office relocation is not required, you just need to change the space inside the existing office.Mobile partitions are a good choice. Buying them – you are buying a piece of office furniture that can serve you for a long time. Hence, their price is much higher than that of stationary partitions.

Deaf mobile modules 60 mm thick

Combined mobile partitions 60 mm thick

Convertible office partitions.

Convertible partitions are also called sliding.Convertible partitions are used wherever it is necessary to dynamically and constantly change the space in the office.

Typically this type of partition is used for meeting rooms, presentation rooms and video conferencing.

These partitions are difficult to install and expensive, so they are much less common than other types of office partitions.

Fireproof office partitions.

If the company wants to protect its office from fire, or at least reduce its likelihood, then it is necessary to use appropriate non-combustible materials in the repair.

Office partitions made of such non-combustible materials are called fire protection office partitions. Both internal filling and glass and blind sections, from which partitions are mounted, can be fireproof.

Glass office partitions.

Glass structures are the most common type of office partitions. Glass is the most modern and fashionable material for the office. It provides good illumination, which improves the working atmosphere in the office, and you can simply save on electricity.

In addition, even single-glazed glass partitions provide sufficient sound insulation for rooms. This is because tempered glass in sections, thanks to modern production technologies, has good sound insulation performance.

Double-glazed glass structures can be used to create rooms with increased sound insulation. In addition to good sound insulation, such rooms also have the ability to better retain heat in the office.

Glass-type partitions are designed for profile mounting. Profiles can be steel, aluminum, as well as all kinds of plastic. This is what distinguishes glass partitions from all-glass partitions.

Glass partitions in aluminum profile

Glass structures with glass matting

Aluminum office partitions.

Aluminum office partitions got their name only because they use an aluminum profile in their structures.

Accordingly, all-glass partitions, in which there is no profile at all, cannot be aluminum partitions.

In addition to the aluminum profile, a steel or plastic profile can be used in office partitions.

Office doors.

Our company is engaged in the installation of swing and sliding office doors.The types of work performed can be viewed on the website in the relevant sections.

Activities of our company.

The main activity of our company is the installation of office partitions.
We install office partitions in Moscow and the Moscow region, but it is also possible for our specialists to travel to other regions of Russia. All our office furnishings and designs include a quick cost estimate and a free site inspection.

We supply and install a complete range of office partitions including
glass partitions ,
sanitary cabins ,
fixed partitions ,
mobile partitions and
convertible partitions . Our company is a time-tested company that installs office partitions at profitable
prices in Moscow and throughout Russia.

We also deal with the design and decoration of offices, taking full responsibility for the work performed and doing it in full accordance with your requirements.The full package of our services includes – installation of office partitions, furniture, as well as carrying out electrical work, soundproofing, etc. in the office.

We know the client’s requirements and can offer you various options for all-glass and stationary partitions filled with plasterboard, laminated chipboard or MDF coated with valuable wood veneer at competitive prices. We understand that the business of our clients is in constant development, and therefore the climate in the office should develop in accordance with it.Our service includes a complete project management with a free site survey where we can advise you on how to actually get the most out of your office space.

We can also help you with rearranging your office, advise on how best to design to suit your business style, optimize office space and increase productivity.

A bit of history.

We have combined seven years of experience in the field of office partitions, the high competence of our employees, who are ready to give advice to our clients, with first-class service.We supply office partition accessories only from the leading manufacturers in the field to make sure our customers get the best, and with a team of first-class specialists, we are able to complete any work in a short time and without delay.

How to contact us.

For further information regarding our office partitions and works please contact:
Moscow, st. Kolskaya, 7, building 6. Phone / Fax: (905) 522 64 07

90,000 best ideas for your interior – INMYROOM

An interesting element
modern interiors are light stationary, mobile and sliding
partitions for zoning space in the room, allowing for a short
time and at low cost to transform the room.It may be relevant
both for studio apartments and for small apartments, where 1 room has
combine territories for different purposes, for example:

  • living room and
  • living room and
  • dining room and area

Types of partitions

Uncomfortable living in
a room that is both a bedroom, a dining room and a living room.
To make the space more comfortable and functional, a variety of
types of partitions for zoning space in the room.


Movable partitions
convenient when you do not want to arrange a major rearrangement in the room.
The partition is purchased and installed where it is needed.
At any time, it can be moved to another location, so this option is ideal.
for permutation lovers. Such partitions include:

  • screens;
  • high
  • aquarium cabinet;
  • racks;
  • chests of drawers, sofas
    or other suitable furniture.


Most often mounted
during the renovation. If the need for such a design disappears, it will have to
break down, removing the pile of debris and then patching up the marks on the ceiling, wall and floor.
They can be of various shapes.

1. The podium is
a very convenient zoning method for a large room with high ceilings.
It can be a few centimeters high or high enough to
organize a small pantry in it for storing things.During
the design of the structure should consider convenience and safety
moving on a given surface, as well as climbing and descending.

2. Decorative
partitions for zoning space in the form of a false wall are most often made
from drywall, less often from bricks, glass blocks, wood. Even though it’s solid
construction, but it is thinner and lighter than a blank wall. It can be planned with
openings like shelves that house an aquarium, household items, etc.
similar items. In such a wall, if desired, you can place even a small
fireplace.Plasterboard and glass blocks or glass with stained glass are perfectly combined

3. Arches or semi-arches
suitable even for small rooms, and if you combine an arch and
partition, you can choose the most harmonious zoning option in
range from clear demarcation to slightly outlined separation.

4. You can also
use a column (however, it is not suitable for a small room) or forged
metal openwork lattice.


Consists of leaves,
moving on 2 runners, fixed on the ceiling and floor, or only on
the ceiling.Such a partition can be easily moved to one side or the other, opening the view
premises in whole or in part, and if necessary, the zones can be isolated
apart. Easily assembled on site.

Made of the following materials:

  • glass;
  • wood;
  • aluminum;
  • plastic.

Partitions can be:

  • blind;
  • openwork;
  • with inserts made of
    any material.

Despite the apparent
stationarity, guides can be easily rearranged to another part of the room.
The simplest version of this type is fabric curtains or blinds, decorative
curtain made of beads or bamboo.

Basic zoning rules

room, you can make a partition from ceiling to floor or slightly higher
human growth from any material or pieces of furniture you like, and
also any shape.

No restrictions
and standards, but there are recommendations that will help you choose the method
delimitation of space.If the premises
is partitioned off, it is advisable to do this so that there is a window in each zone.

If impossible
to implement the previous condition, glass partitions should be used.
If the glass is colored, frosted or coated, such a partition
insulates, and the light will pass through. Additional troubles will arise only with
cleaning, because the glass will have to be wiped every time, because it is easy
any traces remain.

Any kind of partition
should not split the window.If there is only one window in the room, you can install
a small partition with the ability to bypass it from 2 sides, then the light from the window
will be more evenly distributed throughout the room.

Partitions for
zoning space from shelving not only divide the room, but also add
functionality, because books, souvenirs and
other items that can be accessed from both sides. In addition, shelving
allow light to pass through, so they can be an excellent option for enclosing a part
rooms without a window.

Too small
the room should not be separated by stationary blind partitions. Enough
will be a tall plant or rack.

Not necessary
partition the room from floor to ceiling, the partition may be higher than a human
growth, especially for small rooms. If the ceiling is open, it will
will visually enlarge each of the zones.

the space is not divided along the long side – you get 2 less functional,
even narrower areas, similar to pencil cases.

The classic zoning option is
separation of the recreation area with the help of a soft corner – a corner sofa and armchairs,
located around the coffee table. If the furniture is used in
as partitions for zoning a room, then narrow objects such as
high chest of drawers or shelves for books and souvenirs.

Designers offer
many options for partitions for zoning, but when choosing not worth it
letting emotions prevail over common sense. The partition should not only
like it, but also match the style and color scheme of the room.


Ideas of partitions for zoning, which you can do yourself.

Partitions for zoning space: an overview of the best options

Many rooms need to be divided into zones:

  • kitchen – allocate a dining and work area;
  • bedroom – arrange a place for an office;
  • living room – to allocate a place for work and rest, which will significantly increase the comfort of everyone who is in it;
  • studio apartment – separate sleeping places for all family members.

There can be many such reasons. You can divide rooms into zones using lightweight partitions that do not violate the overall design of the room.

The main goal of any zoning is to solve everyday problems with a visual sense of the integrity of the space when dividing it into separate corners that are convenient for all family members. Separations require a room where two children live, each of whom needs their own separate space where the child lives with the adults.

This is especially true when the parent and child are of different sex.Separating the children’s area from the adult with a partition will solve several problems at once. The games of children will not interfere with adults. Schoolchildren will have their own corner for homework.

Partition functions

A good alternative to a bulky brick wall is a plasterboard partition made of dry gypsum plaster enclosed in 2 layers of cardboard. Such a partition, of course, does not have high sound insulation, it cannot be used as load-bearing and permanent structures, like bricks or wall blocks, for the laying of which a mixture of cement and sand is required.

But it is easily mounted on a crate made of a metal or wooden frame, quickly disassembled when there is no need for it, giving the room its original appearance. The plasterboard partition can be covered with paint, wallpaper, decorative plaster, or decorated with a panel or painting.

With the help of a plasterboard portable partition, it is easy not only to divide a room into separate functional zones, you can make several from one room. To install such partitions, a frame is first mounted from a rack and guide profile, which is attached to the walls and ceiling, sheathed with plasterboard sheets on both sides.

The partition can have several sections interconnected by special connectors. They are quick and easy to disassemble and carry. A sliding partition structure will separate a corner for a bar or a dining room in the kitchen, and will equip a rest or psychological relief room in the office space.

Types of mobile partitions for space zoning

Mobile partitions do not require fastening to the surface of walls or ceilings. They have wide functionality and are much cheaper than stationary ones.Partitions made of glass and decorative laminate look beautiful.

They are widely used in studio apartments, leaving the room space open. Made in any style, they are aimed at creating a special interior in the room without disturbing the existing atmosphere of the house.

Shelves for storage as zoning

Everyone familiar with popular racks for placing household items, souvenirs can also be used to divide rooms into zones. Due to its openness from all sides, the rack fits well into a modern interior without cluttering up the space.

The design is especially relevant for small apartments, where it is easy to replace a wardrobe for certain things, saving room space. With the help of a rack, you can not only divide the room into zones, but also improve the artistic value of the interior.

Racks for zoning can be modular and body type. They can be bought in different heights, low and reaching the ceiling itself, rectangular, angular, stepped, in the form of a snake.In a room with one window, it is better to install a translucent structure equipped with lighting. Visually enlarge the low ceilings of the structure reaching the ceiling. For such partitions, wood and metal are used.

Bamboo racks made of rattan plants look no less beautiful and original. The rice paper structure looks airy. Due to its subtlety, it does not prevent natural light from spreading throughout the room. The racks are easy to assemble and disassemble, easy to maintain, and inexpensive.

Arrangement of furniture as zoning

The perception of a room largely depends on the furniture placed in it. A cozy atmosphere for relaxation and rest is created by a sofa and armchairs with a table next to the TV or fireplace, which is the compositional center of the room.

To divide the room into separate zones, you can use dressers, bar counters, decorative tables that serve as a stand for lamps, vases, figurines. They can separate the workplace from the recreation area.Separation of space with furniture is not associated with additional cash costs. You can rearrange pieces of furniture at your discretion at least every day.

The role of the screen in zoning

The original solution for the zoning of the room is the screen. You can buy it ready-made or make it yourself from corners, slats and fabric. Of the tools, you only need a hammer with nails or self-tapping screws. First, a frame is assembled from the rails, fabric is attached to it. The resulting panels are attached to each other with movable corners. The screen can be installed on legs or do without them. The upholstery for the screen is chosen from cotton, linen, silk. Color variations can be different, from solid pastel tones to various bright colors.

Screens with landscapes, paintings, still lifes look original. The screen can always be folded as unnecessary or moved to another place.

The simplest zoning technique – curtains

Curtains are one of the simplest and cheapest materials used in zoning.With the help of a curtain rod with curtains, you can arrange the entrance to the sleeping place, close the entire necessary area or only part of it. To divide the space, it is not necessary to involve specialists, it is only necessary to fix the cornice in the right place.

It is possible to equip a living room with a sleeping place, separating it from the rest of the space with a canopy, which not only zones the living room space, but also gives a unique fabulous atmosphere. Two curtains of different colors, fixed together, on the side of the bedroom can be in delicate bedding tones, on the side of the living room – in bright colors. To change the appearance of a room, it is enough to change the color and pattern of the curtains, there are many options.

In addition to the usual curtains made of fabric, unusual and original curtains-ropes, bamboo, beads strung on a thread, parts made of wood, glass, crystal, transparent thin fabric in the form of muslin are used. With the help of such extraordinary curtains, together with zoning, you can completely change the interior appearance of the room.

Other effects used in zoning the space of rooms

A certain area of ​​the room can be easily distinguished by painting a part of the wall in a different color, applying one of the types of finishing plaster.Different shades and textures of the wallpaper contribute to the delimitation of space. For example, the dining area can be done with wallpaper in bright colors, the rest with a contrasting calmer color. The children’s room can be divided by wallpaper of different colors into a play area and a place to sleep.

In a room with a niche, where a table with a computer is installed, with the correct selection of the pattern and texture of the wallpaper, you will get an imitation of a study. Lighting plays an important role in dividing a room into zones. It can be natural and artificial in the form of spotlights, floor lamps, sconces.Correctly installed lighting will help to do without installation and transfer of partitions. The chandelier under the ceiling unites the space, and the directional flow of light from the wall lamp divides the room into separate zones according to their purpose. To illuminate a certain place, you just need to turn on the light source.

A great effect in the delimitation of space in the interior is given to LED strips. They are reliable and safe to use. They can be mounted in places where other luminaires cannot be used.For example, to highlight a picture or a mirror, to focus on a certain piece of furniture, drawing attention to it. One of the elements of zoning can be a podium with a bed placed on it. Backlighting will only add originality to the pedestal.

The space of any room can be delimited by different colored flooring or carpets. True, with such zoning, the feeling is lost where you can retire from others.

Competent zoning of a room is just as important in interior design as any layout.Division into zones using partitions, racks, slats is intended for large rooms. Where there is no way to separate the bedroom from the main space, division into zones is achieved by using color, texture, materials and lighting solutions. When choosing one of the proposed zoning techniques, do not forget about the interior of the room, which in any case should be made in a single, holistic and user-friendly style.

“Mobile” partitions for apartment

A quick and simple solution for the allocation of functional areas in an apartment, the possibility of free redevelopment – all these are mobile partitions.Let’s learn more about them.

History of mobile partitions

Originally used portable structures to divide steel space in Asian countries. No interior walls were built in the room. The house represented one large space in which the bedroom, dining room, living room were separated from other areas by folding screens. They could be easily carried from place to place. The partitions were decorated with fancy ornaments, patterns, and were made of expensive woven materials.

Europeans liked this way of dividing space, and soon folding screens appeared in the mansions of aristocrats. Most often, they separated a secluded space in the lady’s boudoir so that she could change her dress behind a safe shelter. The screen could be placed anywhere and removed at any time if it became unnecessary. This zoning method was appreciated by all segments of the population.

Advantages and disadvantages of mobile structures

Portable structures have significant advantages. Thanks to their advantages, they not only survived to this day, but also transformed into a variety of options for mobile partitions. The advantages of screens include the following factors:

– lightness and simplicity of design, the ability to independently build a partition of the required dimensions;

– a wide variety of materials;

– the ability to use indoors with any design;

– the ability to zone a selected area at the right time;

– Convenience of storage – when assembled, the screen does not take up much space.

The disadvantages of mobile partitions stem from their advantages – a lightweight, weightless design does not protect the allocated space from outside noise. Many screens are completely transparent or have decorative elements. These partitions, unlike ordinary walls, can only visually zone the space, but not physically.

Types of partitions

Movable partitions can be very different. They differ in appearance, material used, method of dividing space, dimensions and other indicators. All mobile devices can be roughly divided into the following types:

1. Wireframe. They represent frames made of plastic, metal, wood or other profile, on which the base is attached. For stability, the structure is installed on brackets, rollers or wheels that allow the partition to be moved to the desired location.

2. Frameless. Most often these are fabrics treated with special substances that make the material rigid. Frameless screens are rolled up or assembled with an accordion.When folded, they almost do not take up space in the room. When deployed, they help protect the selected area from prying eyes.

3. Folding. An accordion door can give an idea of ​​the design. A mobile partition of this type has the same principle of operation, and it is made of the same materials as a folding door – plastic, wood, glass elements. An aluminum profile is used for fastening – it is light, but durable and can withstand the weight of even heavy tempered glass.Folding structures can move on rollers along guides fixed to the floor or ceiling. But partitions are more functional, in which each section is equipped with wheels. The structure can be extended and fixed in any desired position.

4. Sliding. This type of mobile partitions can only be called conditionally. The structure is rigidly fixed to the guides and moves along only one line.Doors in a wardrobe can serve as an analogue of sliding partitions. But sliding devices are widespread, since they have good soundproofing properties, and when closed, they look like a full-fledged wall between rooms.

Design fantasy does not stand still. New types of mobile partitions are constantly being invented. The design looks original, resembling cubes placed on top of each other. They are made of fiberboard and painted with the desired color.It is quick and easy to disassemble and assemble the cubes, so such a wall can well be attributed to mobile partitions.

Swivel-sliding devices on guide rollers look very interesting. They represent individual doors that can be rotated at different angles. When unfolded, the structure is a blank wall. To go behind it, you need to turn towards one of the “doors”. The swing-out design works in the same way as vertical blinds. To assemble the partition, you will need to turn the doors perpendicular to the observer and move them to the wall.The device allows you to completely or partially fence off part of the room.

Materials for the manufacture of mobile partitions

It makes sense to consider only screens based on a frame, since frameless structures are made mainly of fabric and are more like sliding curtains than partitions. The following materials are used for the base:

– Plastic. Lightweight, cheap material. On its basis, sliding, swivel and folding partitions are made.They can be perforated or solid, have slots for newspapers or magazines. The disadvantages of plastic include fragility and susceptibility to mechanical stress. Even a child can damage the partition or screen by hitting it with a heavy toy.

– Glass. A material with varying degrees of transparency and strength is used. Tempered glass screens can be used to fence off areas even in the children’s room. Glass partitions decorated with stained glass and drawings are very popular.The disadvantages of glass include its fragility. It is necessary to collect and store screens carefully so as not to scratch or break the structure.

– Polycarbonate. Differs in strength, durability, weighs little. A polycarbonate partition wall lets in sunlight, so it can be used for zoning shaded rooms.

– Triplex. Laminated glass is distinguished by its high strength, resistance to mechanical stress, and durability. The disadvantages of the material include a large weight, which does not allow the triplex to be mounted on a light frame.

– Fabric. A diaper screen looks great and will brighten a classic or romantic interior. But this is a very fragile material. The fabric can tear from any careless movement, and the partition will lose all its decorative properties.

The following materials are used to create the frame:

– Plastic. Applies only to light screens or partitions.

– MDF. Among the advantages are low weight and attractive appearance.The material is not durable and is quite expensive.

– Aluminum. Durable, strong, lightweight metal that does not corrode and decay. Partitions on an aluminum frame can be installed in the bathroom and not be afraid that the structure will be covered with mold or fungus. The disadvantages of aluminum include low soundproofing ability.

– Wood. A beautiful, environmentally friendly, durable material, has good noise insulation properties, but is unstable to the external environment.Wood is “afraid” of high humidity and is sensitive to mold and mildew, so using a partition with a wooden frame in the kitchen or bathroom will not work.

Zoning a room with partitions – methods of zoning with partitions + photo

Most apartments and houses consist of several cramped rooms, which is why some tenants decide to combine. As a result, one large room becomes multifunctional: there can be a kitchen, dining room, study, bedroom, living room at the same time.Such a layout must be correctly executed, with special attention paid to zoning. Most often, the room is zoned with partitions, which can be represented by a variety of types of structures.

Division of space

Plasterboard partition with glass wall

In most cases, zoning is carried out in the living room, where it is necessary to visually divide the room into two zones, one of which will be allocated for relaxation and receiving guests, and the second is provided for organizing a bedroom or a workplace.In addition, it is in this way that zoning is carried out in children’s rooms, where there should be a place for games, recreation and study. Zoning is also popular in the kitchen, where zones for cooking and eating should be present.

There are only four main reasons for zoning:

  1. Division of one room into several zones with different functional loads. For example, a combination of a living room and a nursery.
  2. Separation of the personal area from the work area.
  3. Changing space depending on the time of day.This includes the proportional allocation of individual zones. For example, in the evening, an ordinary closet can be transformed into a folding bed.
  4. Creation of an optical illusion for visual interiors. For example, if necessary, a small room can be visually expanded, and a large one can be made smaller.

In modern studio apartments, using a variety of methods and methods, one large area is divided into several functional zones.

Partitions in the interior


To solve a number of the above problems, many decide on radical changes to the room, but the construction of new walls requires high costs, as well as global repairs, and not too capital walls are practical. There is another way out – this is a quick, simple and at the same time original transformation of space with the help of partitions. This is a Swedish idea that allows you to effectively manage the entire area in a house or apartment.

This way you can solve all the problems associated with dividing a room into several zones. Moreover, every centimeter will be useful and will be actively used. Zoning space in a room can be done in a variety of ways, but the most popular types are:

Unusual partition design

If we talk about some clear proportions and instructions, then there are none. But, when planning to carry out zoning, several important points should be taken into account:

  1. If it is necessary to select a children’s corner, study or greenhouse in the living room, a 1: 2 or 1: 3 proportion will be sufficient.
  2. Most of the room should be planned where there is a window.
  3. To carry out the separation in the living room of the bedroom, the partition is installed in the middle. It can be made 2/3 of the height or full height, and can also cover only half of the passage.
  4. An arched ceiling will be able to accentuate the boundaries of the zones.

False walls, which can be made in a variety of versions, are no less popular. Moreover, they will be functional and decorative.

Plasterboard or plywood partitions

With fireplace

The most time-consuming, but at the same time, the original option is the installation of a plasterboard or plywood partition. Plasterboard construction is built on the basis of a metal or wooden frame, attached to the floor, wall, ceiling. The partition does not have to be smooth and even. With a little imagination, you can plan in it:

  1. Storage niches.
  2. Niche for aquarium
  3. Place for a false fireplace.

The built-in wardrobe will also look good. It is necessary to choose a design depending on the tasks and the general style of the room.


  • the ability to create a curly partition;
  • great stability with secure fastening;
  • unlimited finishes;
  • electricity supply inside.

When choosing plasterboard partitions, remember that they will be static.The oversized design can drastically reduce space and natural light.

An original addition to any design will be a backlight that is mounted in a frame – it can be spotlights or an LED strip.


Textile partition in the studio

This method was also used by our grandmothers, who separated a secluded place or bedroom in a small house with curtains. In the modern interior, zoning with curtains is used, with their help you can quickly and cheaply separate one zone from another.A boudoir, dressing room or bed can hide behind a dense or light canvas.

The curtains can be fixed with a curtain rod, along which it will be easy to move. Also, portable screens, which are a canvas attached to a frame, should be attributed to this category. If necessary, such a structure can be easily assembled and hidden, since it is mobile. When choosing a material, you should take into account the style and basic colors of the interior of the room. If we are talking about a light and transparent partition, then you need to choose from:

  • organza;
  • veils;
  • tulle.

Classic style involves the use of draperies, in this case the curtains are picked up with tassels.

Decorative structures

Such partitions will divide rooms, rather, conditionally, since their main task is to mark the border of both zones, and not to hide the contents behind them. The design of decorative partitions can include a variety of elements that will harmoniously fit into the interior of the room. Moreover, such partitions can be not only decorative, but also functional.For example, a countertop is sometimes cut into the partition, which can be used for eating, working or creating.

Functional partition in the studio

It should be noted that the structure should be airy, light and transparent, due to which the room will not decrease visually, but, on the contrary, expand. Appropriate use:

  • glass;
  • wood;
  • metal;
  • mirrors;
  • plywood;
  • drywall;
  • textiles.

Frosted glass

Glass can be matte, completely transparent, patterned, colored and even corrugated. Interior lighting, bugles and beads will look interesting. A shelving unit, for example, can be used to decorate any room without making any fundamental changes. The mount is selected individually, depending on the design.

False walls

This is not a very common way of dividing a room, which is very often used by designers in modern interiors.In such an extraordinary way, a bedroom and a living room, a kitchen and a dining room, areas for two children in a common nursery can be divided. The main material for creating false walls is drywall. Since this material is practical and flexible, a variety of partitions can be made from it:

  • curly;
  • openwork;
  • with niches for aquarium, fireplace, TV or storage;
  • equipped with shelves;
  • in the form of a ladder;
  • supplemented with inserts of other materials.

Fashionable carved plywood partition based on a plasterboard frame

Also, false walls are divided into mobile and fixed (stationary). When planning the interior of a studio apartment, such a division into zones will be more appropriate.

Other types of partitions

Sliding partition

  1. A wide variety of items such as furniture can serve as a partition. If there are no spare funds, then the separation can be carried out with ordinary furniture: a wardrobe, a chest of drawers, a bookcase and even a sofa with a high back.In this case, the items will simultaneously perform several functions, but the main one remains their direct purpose.
  2. Sliding doors and arched ceilings can also solve the problem with zoning. At the same time, it is enough to choose the right material and shape of the structure so that the partition not only harmoniously fits into the existing interior, but also performs other functions.
  3. Will add originality and lighting that can act individually or complement almost any design.A wide variety of lamps, LEDs, lanterns and spotlights can be selected for lighting.
  4. Popular eco-design implies the use of natural materials, so in such apartments “living walls” can act as a partition. It will be appropriate to use tall indoor plants or a rack on which flowers are placed.

Organization of the working area

Particular attention should be paid to the double-sided cabinet.This design can be ordered individually. In the kitchen, unfortunately, it will be completely irrelevant.

So, with the help of partitions, you can divide a large room into several zones, each of which will have its own purpose. You can use both simple and light options, and complex designs. If you want to redevelop, you should take into account the preferences of all residents.


Bamboo partitions

Openwork partition

Zoning with cabinet

Curtains hide the sleeping area

Air baffle rack

Visual bed compartment


Narrow partition

Heavy screen

Plasterboard rack

Patterned glass partition between bedroom

Accordion sliding partition

Partition with built-in shelves and fireplace

Partition in the middle of the room

Small tabs

Light air curtains can be used

Bed covered with curtains

Plasterboard partition with pass-through shelves

Plasterboard decorative partition in the nursery

Wooden interior partitions

Decorative partition with stained glass

Wooden partition – design solution

90,000 indoor decorative glass for zoning rooms, materials for sliding and mobile products

A sliding partition in an apartment – an effective method of zoning space

Zoning of living space is an important aspect of human life.Thanks to him, absolute peace is achieved in the bedroom, comfort – in the living room, and clear concentration in the study. You can easily and quickly make a layout in a large room – this does not require the use of any special tools and calculations. It is more difficult when the apartment has a limited area. What to do in this case? There is a way out – sliding partition to apartment . Installing a comfortable partition is an excellent alternative to standard room remodeling.Interior designs will help not only to competently divide the apartment into zones, but also to create an original design composition.

Advantages and disadvantages

Before using this or that design technique, it is important to familiarize yourself in detail with its pros and cons (Table 1).

visual expansion of space

large selection of materials

high resistance to external factors.

The main advantage of sliding partitions is the preservation of useful space.The design does not take up much space, but at the same time it allows you to correctly delineate the dwelling. With its help, even from one room, you can make a comfortable bedroom and a functional office. If the structure is made of glass, then this will help visually expand the small space.

Sliding partitions into an apartment can easily perform different functions: walls or doors. If you suddenly want to retire, then the partition can be easily closed. Of course, the noise and sound insulation of such a structure is much lower than that of a monolithic wall.

Such interior structures can be made of wood, plastic, metal and glass. Most often, it is glass that is used, because it allows you to visually increase the square of the apartment and make the space light and airy. Glass structures do not impede sunlight, so the room is always warm and cozy.

Despite its external fragility, glass is a very strong and resistant material. It easily withstands heavy loads, exposure to chemicals and temperature changes.Specially processed material is used for partitions, so you don’t have to worry about injuries. Glass is very difficult to scratch or break.

The undoubted disadvantage of sliding interior designs is their high price. This zoning technique is not cheap at all. Roller system, glass, installation and maintenance – all this will require an investment of a certain amount. However, the costs are paid off in full, because there is no more convenient and compact way of zoning an apartment.

Varieties of partitions for an apartment

Sliding partitions for residential premises have a similar structure to the doors of a conventional wardrobe. They have carriages, rollers and the ability to move in different directions. However, unlike the doors of sliding wardrobes, partitions are divided into several types (Table 2).

Types of sliding partitions for apartments

By design type:

accordion, with several fixed sections.

By mounting type:

top and bottom.

framed and frameless.

Let’s consider each of the types in more detail. Partitions, which are folded according to the principle of accordion , are very convenient during operation and provide almost unlimited design possibilities. However, they provide poor insulation. Structures with several fixed sections provide better protection against noise.

Top-mounted partitions are the most demanded, which is not surprising at all.Such structures are attached to the ceiling, so they do not violate the integrity of the floor space. This not only looks more aesthetically pleasing, but also allows you to freely clean the room. However, this type of attachment also has significant drawbacks. In particular, such partitions wobble and hold together a little during movement.

Bottom fastening type provides for the installation of the roller mechanism directly on the floor. This significantly complicates the cleaning process and is unsafe, because you can catch on the structure and fall.But there are many benefits too. Firstly, a partition with such an attachment will be able to completely cover the entire wall and provide good sound insulation. Secondly, it will not stagger.

Frameless partitions are the latest fashion trend in home furnishing. They are usually made from frosted or clear glass. Sometimes colored and stained glass are used, which gives the room a special chic. However, such partitions have a high weight and a solid structure, which cannot always be brought into the room.

Partitions with frame are more common. The structure itself has sections of wood or glass, and is framed by aluminum frames. Such partitions are easy to install and lightweight.

Zoning with partitions: practical advice

Small and small apartments are not the lot of partitions. Their versatility can be appreciated even in spacious apartments. The practical design of the partition can make significant changes to the room, combining high functionality and unique decor.Consider useful tips that will be useful to apartment owners when zoning:

  • small apartments, as a rule, have a small kitchen area. To expand this space and simplify access to it, you need to remove the monolithic wall and install a glass partition. With the help of this technique, the apartment will become more spacious and airy. When installing a partition in the kitchen, do not be afraid of contamination. Glass will withstand steam, heat and humidity;
  • To separate the parents’ bedroom from the quiet children’s corner, you can use mobile accordion dividers.They are easy to install, take up little space and are disassembled at any convenient time;
  • if you have a studio apartment, then an accordion partition can be used not only to separate functional areas. In such a room, it will play the role of decor. The original partition will bring a lot of comfort to a large space and at the right time will allow you to create a quiet corner in the apartment;
  • The glass partition can be used as a door. This technique is especially relevant for “modest” dwellings.Unlike the door leaf, the partition does not take up space when opened. And if you choose a glass structure, then you can get the visual effect of increasing the space;
  • It is also important to use a sliding partition in the kitchen. With its help, you can divide the work and dining area. Agree, it’s not very pleasant to dine while watching a mountain of unwashed dishes in the sink. The partition will solve this problem;
  • having a small apartment, not many can afford to install a large wardrobe, so open hangers are used.To hide them from prying eyes, you can use a partition.

Role in design

As noted above, sliding partitions fulfill not only a functional task, but also an aesthetic one. This is achieved through the use of original materials and various decorations. Mirrors and glass used in the manufacture of partitions can be processed using the most modern installations and techniques. For example, you can add aesthetics to conventional designs using silk-screen printing and photo printing.

You can also decorate the interior partition using original stickers. They can be ordered at the nearest printing house, or purchased in a ready-made version. The good thing about stickers is that they can be easily removed from the surface over time. They will not leave a trace.

Some manufacturers produce colored glass partitions. Such designs look very impressive and extraordinary. Transparent glass is usually used for the manufacture of office partitions. This helps not only to distribute work areas, but also to track employee behavior.

Mirrored partitions will help to decorate large apartments. Their use will not be able to drastically affect the free space, because mirrors visually increase it. Mirrored structures can be used, for example, to separate the bedroom from the dressing room.

Specifics of using partitions in an apartment

It is most logical to use partitions for zoning in two cases: with limited space and, if necessary, refresh the design of the room in an extraordinary way.And this is not surprising, because partitions help to save square meters and in power to create an original atmosphere. However, before you start purchasing a partition for your home, it is important to decide on the main aspects:

  • budget;
  • view of the room;
  • material;
  • type of construction and fastening.

Having defined these aspects, you can start choosing a partition. The most important thing is not to confuse it with a sliding door. The sliding door has only one leaf that covers the doorway.The partition consists of several movable sections, reminiscent of a wardrobe door.

Having chosen the look and appearance of the structure, it is important to hire professionals to install it. It is not worth doing such a responsible business on your own. Glass partitions are heavy and can be damaged if handled incorrectly. Only a professional should install such structures if you want them to be able to serve for a long time and with high quality.

After installing partitions, do not forget about maintenance.Such designs work using a roller mechanism. Over time, it wears out and requires minor repairs. Maintenance is especially important if the bottom mount type has been chosen. During its operation, the roller mechanism is constantly clogged.

It’s no secret that the main disadvantage of interior partitions is their permeability. They will not be able to protect the room from sound and aroma. Therefore, it is worth taking care of additional protection mechanisms. For example, establish a ventilation system in the apartment, especially in the kitchen.Ventilation should work at full capacity so that smells of food and cooked food are not felt in a small apartment. You can reduce the sound by choosing the right design. In this aspect, it is better to give preference to partitions with a lower type of attachment.

Mobile partition for zoning a room (11 photos)

Zoning is an important stage in interior design, especially relevant for a spacious one-room apartment or studio apartment, the footage of which allows it to be divided into several functional zones that are comfortable for residents.The principle of room zoning is not new, but in recent years it has become an extremely popular area of ​​design art. One room can successfully combine a bedroom, living room, study, sports corner, recreation area. To create separate zones, book shelves, aquariums, narrow cabinets, stationary structures made of wood, plasterboard, metal, stone, built into the walls are often used, but mobile lightweight partitions for zoning space in a room are recognized as the most convenient and modern, with which you can increase or reduce the area of ​​one or another fragment of the room.Such structures look extremely impressive in combination with different options for wall and ceiling finishes, combined lighting, and a two-level floor.

Types of mobile partitions

Depending on the functionality and purpose of certain zones and preferences of the inhabitants of the apartment, mobile partitions can be:

  • transparent;
  • matte;
  • opaque.

Structures for zoning can be bought ready-made or made with your own hands from a wide variety of materials, among which the most popular are:

  • plastic;
  • glass;
  • bamboo;
  • wood;
  • acrylic;
  • textiles;
  • mirrors;
  • drywall;
  • wrought iron
  • ampelous and woody indoor plants.

How to choose a mobile partition

A mobile partition can combine several materials. It can be a structure made of wood or plasterboard with fragments of textiles, artificial stone, mirror mosaics. Sliding models made of monolithic and openwork acrylic, stained glass partitions, screens, blinds, forged structures are popular.

The mobile structure is not attached to the floor, walls or ceiling, therefore it must be strong and stable.Modern manufacturers offer many options for vertical and horizontal, high and low, wide and narrow, folding and sliding models equipped with a stable frame, legs or wheels.

When choosing, it is important to take into account the weight of the product, since a too light partition can be accidentally knocked down, especially if children and animals live in the apartment.

For zoning a family room, it is better to use durable acrylic, textile, bamboo, plastic or wooden models that are environmentally friendly, inexpensive, impeccable in appearance and safe for small destroyers.If necessary, a broken piece of furniture can be easily replaced with a similar product.

Plastic mobile structures

Mobile plastic partitions are the most economical way of zoning space. They are made of high-quality, durable, easy-to-clean material and are often used for zoning children’s rooms, in which it is necessary to separate the play area from the rest and sleep area.

Plastic models can be sliding and folding, vertical high and horizontal low, from opaque and transparent material.Designs decorated with drawings and patterns are very popular.

Low portable cube-shaped or wide rectangular design can be used as additional trainers and stands.

Movable plasterboard partition

Mobile plasterboard partition is one of the most common types of zoning, because it is convenient, durable, environmentally friendly, safe and has a relatively low cost. Craftsmen prefer to make such interior items with their own hands, independently solving constructive issues.

A mobile structure made of plasterboard can be shaped, narrow, wide, horizontal or vertical, have a wide variety of designs – it all depends on imagination and skill. The finished product can be pasted over with wallpaper or tiles, upholstered with fabric or decorated with decorative plaster.

An important feature of drywall partitions is opacity, so it is better to use them when zoning spacious, light rooms.

Glass mobile partitions

Frame and frameless glass mobile partitions, which can be made of transparent, corrugated, frosted, tinted glass with a relief pattern or a pattern made using the spray technique, are very popular.

  • Partition for zoning from opaque glass will serve to separate the living room and dining room from the bedroom and nursery, study from the bedroom and living room, bathroom from shower.
  • Transparent tinted glass models look great between the living room and the relaxation area with ornamental plants and aquariums.
  • Several transparent glass structures are the only means of successfully zoning a room with one window on the shady side.

Mobile glass structures are an effective addition to the interior in any style, but they are not devoid of some drawbacks, the main of which is considered to be traumatic. Interior details, including partitions, are made of tempered glass, but sometimes situations that are not foreseen by technologists arise when even super-strong material cannot withstand. An equally important disadvantage of glass mobile partitions is their high cost, which significantly limits the range of potential buyers.

Among the most impressive and expensive products are the smart glass partitions, which become transparent under artificial light, while matte under natural light. In the absence of financial problems, partitions with touch screens equipped with a virtual menu can be installed.

Mirror structures

Products with a mirror surface have a powerful energy of attraction at all times, and mobile mirror partitions transform the interior, creating a special atmosphere and contributing to the visual increase in space.

Partitions with a mirrored surface are opaque, so they are often used to separate the bedroom from other areas. Depending on the footage of the room, you can install several high vertical models or one sliding structure.

A movable mirror partition can be made by hand. To do this, it is enough to build a stable frame from the profile, sheathe it with plasterboard and revet it on both sides with mirror tiles. You can make the entire surface mirrored or paste over with fragments in any combination by inserting artificial stone tiles into the gaps between the mirror elements.

Other models

Mobile partitions made of bamboo and wood, openwork forged structures and blinds are distinguished by an abundance of shapes and excellent performance characteristics.

A special flavor of the East will be given to the room by screens with landscapes in the Chinese technique of drawing, which again became popular after a long oblivion.

In one room you can combine transparent and opaque glass models, low and high textile partitions.It is important to preserve the unity of style and not to oversaturate the interior with bright flashy colors.

Movable partitions have many advantages, but they have a common disadvantage – the lack of sound insulation, which in some cases becomes an important factor not in their favor.

Partitions for zoning a room – 99 photo ideas

Having a large or small area of ​​an apartment, there is often a question of zoning the space. Today we will talk about what partitions are.Let’s look at the photo examples in the interior and find out from what materials this structure can be made.

False Walls

False Walls have become a popular trend in recent years. This is the name of any decorative partitions made of various materials.

Partition racks

Serve as an excellent decorative element, while being of great benefit to households. In addition to the main purpose, it can be used to store any items: magazines, documents, flowers, etc.

They are also called “Partitions with shelves”, as they often play the role of an open cabinet.

Most often shelves are used for storing books, souvenirs, decorative items.


Slightly cover the space. Visually delimiting zones.

Curtains are also included in the light delimiter.

Sliding partitions

Set to separate individual rooms.Choose comfortable designs that match the design. Glass is often used as a material.

Folding accordion partition is suitable for unusual requests. For example, it will save space on an area of ​​up to 2 meters.

For zoning, sliding doors, which we are used to seeing in special cabinets, will be used.


Horizontal blinds can be used.

Or vertical louvers.

Room screen

There are many options for using partition screens. The most popular examples in the photo are below.

Plasterboard partitions

The most popular solution for space zoning is plasterboard partitions.

From a drywall profile, you can beat any shape that suits your specific needs.

Make special niches in the cavity.

The option is also used to delimit rooms in tandem with a compartment door.

Made of MDF

Beautiful openwork partitions made of MDF will become a highlight of a modern interior.

Look decent in any room. Can be used for zoning interior space.

Glass partitions

Transparent glass partitions look airy and do not clutter up the space.

Glass blocks can be used to completely enclose the area. For example, a sleeping place, a bathroom, a kitchenette.

Wooden partitions

Timber structures will perfectly fit into the eco style.

Timber battens are commonly used to delimit interior space.

They can also be used to delimit zones in a room.

You can apply the original version – vertical partitions made of branches, bamboo.

Photos in the interior of ordinary apartments:

We also offer you to familiarize yourself with other zoning options in apartments:

Partitions for room zoning – 99 photo ideas

Having a large or small area of ​​an apartment, you often have a question with zoning space.Today we will talk about what partitions are. Let’s look at the photo examples in the interior and find out from what materials this structure can be made.

False Walls

False Walls have become a popular trend in recent years. This is the name of any decorative partitions made of various materials.

Partition racks

Serve as an excellent decorative element, while being of great benefit to households. In addition to the main purpose, it can be used to store any items: magazines, documents, flowers, etc.

They are also called “Partitions with shelves”, as they often play the role of an open cabinet.

Most often shelves are used for storing books, souvenirs, decorative items.


Slightly cover the space. Visually delimiting zones.

Curtains are also included in the light delimiter.

Sliding partitions

Set to separate individual rooms.Choose comfortable designs that match the design. Glass is often used as a material.

Folding accordion partition is suitable for unusual requests. For example, it will save space on an area of ​​up to 2 meters.

For zoning, sliding doors, which we are used to seeing in special cabinets, will be used.


Horizontal blinds can be used.

Or vertical louvers.

Room screen

There are many options for using partition screens. The most popular examples in the photo are below.

Plasterboard partitions

The most popular solution for space zoning is plasterboard partitions.

From a drywall profile, you can beat any shape that suits your specific needs.

Make special niches in the cavity.

The option is also used to delimit rooms in tandem with a compartment door.

Made of MDF

Beautiful openwork partitions made of MDF will become a highlight of a modern interior.

Look decent in any room. Can be used for zoning interior space.

Glass partitions

Transparent glass partitions look airy and do not clutter up the space.

Glass blocks can be used to completely enclose the area. For example, a sleeping place, a bathroom, a kitchenette.

Wooden partitions

Timber structures will perfectly fit into the eco style.

Timber battens are commonly used to delimit interior space.

They can also be used to delimit zones in a room.

You can apply the original version – vertical partitions made of branches, bamboo.

Photos in the interior of ordinary apartments:

We also offer you to familiarize yourself with other options for zoning in apartments:

Sliding partitions for zoning space in the room – 47 photo ideas

Stylish partition separating the recreation area

The zoning of living space has a deep meaning of human existence.We want peace and quiet in the bedroom, concentrated mood in the office, cozy relaxation in a secluded corner. However, we do not always have the opportunity to carry out a large-scale redevelopment of an apartment or house. And what to do? Easy to install and convenient to place, sliding interior partitions are a practical alternative to a radical redesign of the space.

Zoning techniques

The versatility of sliding partitions is really appreciated by both owners of spacious apartments and owners of modest “one-bedroom apartments”.The simple and practical design allows for significant changes in the appearance of the home, combining stylish decor with the necessary functionality.

In the first place in the methods of zoning space with the help of sliding partitions is the separation of the kitchen and living room.

Partition separating the dining area from the living room

Removing a monolithic wall and installing a movable structure that can both enlarge and reduce the room, we solve two problems at once – first, we push the partition and get free access from the kitchen to the dining room, without unnecessary doors and narrow aisles.Secondly, we move the doors of the partition – and restore the boundaries of the front room and the kitchen.

Tip! In a one-room apartment, sliding accordion partitions solve the problem of a workplace, an isolated bedroom or a quiet children’s corner. Mobile and lightweight, they can be easily cleaned for the day, and also quickly and simply divide the evening space of the apartment into zones.

An accordion partition easily divides the space of a room into functional zones

For a studio apartment, a sliding partition becomes a kind of decor element that allows you to bring more comfort into a huge open space.This is especially important for young owners and creative people. Are you planning a fun friendly party – just push apart the doors of the partition and you get a huge dance floor. If you want to read your favorite book or watch a new film, without disturbing the rest of the household, then the sliding partition comes to your aid.

By moving the partitions, you can get a luxurious spacious hall. Expanding – full-fledged separate zones

In a country house with a beautiful winter garden, sliding glass partitions do not interfere with a beautiful spectacle and, at the same time, maintain the climatic balance necessary for plants.

The sliding structure is also relevant for a spacious kitchen. With its help, you can separate the working area from the dining area, applying both a common style for both areas, and decorating them in various color and design directions.

By extending the partition, you can get a cozy dining room

Materials for partitions

The choice of partition material depends on three factors: the style of the room, personal preference and the functional purpose of the product. This means that when planning to install a movable space divider, consider what you need it for, what style you intend to fit it into, and how often you intend to use it.To help you, we have prepared a small overview of all models on the market.

The glass partition looks very impressive. It can be made of frosted or transparent glass, with stained glass or digital printing elements. Pairs well with all styles, but does not provide a sense of complete isolation when required.

Spectacular partition made of glass with a picture of wood

Sliding glass partition with a picture

Light, minimalistic glass partition that separates two zones of the kitchen

Wooden models in which the canvas or laminated veneer panels are used in classic interiors.However, their use should be approached with a carefully thought-out interior layout plan. A blank wall, which is imitated by a wooden partition, is organic for a study or bedroom. An excellent solution can be execution in the form of a wooden frame and glass inserts. It is undesirable to use wood in a kitchen or bathroom, where high humidity can damage the material.

A solid dark wood partition looks spectacular in the bedroom

Wooden partition separating the bedroom from the living room

An interesting wooden partition that separates the office from the corridor

Aluminum partitions are not resistant to mechanical damage.If you often receive guests or you have a noisy children’s company, then such models may not withstand an accidental impact and deform. This is a great option for a small-sized home for a single person or an elderly couple.

The aluminum partition is quite delicate in operation

By the way, the accordion partition and the screen partition are a universal model for various styles and premises. They can use wood, glass, aluminum, and plastic.

Two accordion partitions – made of glass and wood – in one room

Elegant, stylish partition in the interior

Glass sliding partition separating the living room from the dining room

Partitions made of plastic based on the discovery of new materials for construction and decoration. They have one particular advantage: they can be designed as vertical blinds. That is, when assembling, they take up a minimum amount of space, which is very important in small rooms.

Stylish plastic partition in the interior

Glass partition in the bedroom

White plastic partition dividing a spacious room

The view of the room changes, it is only necessary to push the partition aside

9000 panels

For rustic and ethnic styles, designers offer leather and bamboo. These materials are convenient and easy to clean, add a touch of chic to the setting and are flexible enough for any type of partition.

From the latest innovations offered by manufacturers, we highlight radius systems and mirror performance. The former allow zoning in complex interiors, the latter visually expand the space, which is certainly welcomed by the owners of small-sized housing.

The original partition from sliding bookcases

Types of sliding mechanisms

According to the principle of sliding, partitions are divided into rail and non-threshold. As you understand, with a rail “run”, rails are attached to the floor and ceiling, along which the partition sheet moves.For a large room, such a design does not play a significant role, but in a small apartment, an extra element on the floor does not really attract residents. In this case, it is better to choose non-threshold models.

Rails on the floor in a small room can create some discomfort

In defense of rail structures, I would like to say that they are more reliable in terms of sound insulation, but thresholdless structures themselves make little noise when used. Obviously, a nonthreshold partition model is preferable for a children’s corner.

Silent sliding partition ideal for children’s rooms. The ceiling appears elongated.

Advantages of sliding partitions

If we talk about the advantages of such zoning, then sliding partitions for zoning space in a room are primarily mobility and variability. The mobile design simultaneously performs two important interior functions: it supports the ergonomics of the space and provides options for zoning the room.

Closing the partition, you can immediately find yourself in a secluded corner

Cozy sitting area behind the partition

A sliding partition allows you to separate from the hustle and bustle and calmly work the bathroom

partitions, partitions An important advantage of partitions is the ability to decorate them. Such unexpected metamorphoses are especially for those who like frequent changes.At the same time, the sliding partition makes it possible for any of the household to find for a while a quiet island for personal space, where you can calmly read or indulge in thoughts about the upcoming business or just dream.

Without erecting walls: 20 original partitions for zoning

For zoning living space, especially in small apartments, it is not necessary to erect blank walls. Mobile interior dividers or decorative partitions for zoning space in a room, made of translucent materials, will simultaneously divide and unite rooms without disturbing natural insolation.Our selection contains a variety of options for such designs.

Partition as an element of decor

1. Partition-pergola

Designers Natalia Tsetsulina, Maria Malyshkina. Photo: Artyom Semyonov

An air partition 160 cm wide, visually separating the kitchen-dining area from the living room, is made of horizontal wooden slats covered with dark brown stain. Together with floral wallpaper, an image of a summer gazebo in the bosom of nature appeared in the interior.

2. Showcase partition

Architect Yegor Kurilovich. Photo: Daria Lyskovets

A floor-to-ceiling showcase made of double-layer tempered glass 10 cm thick separates the changing area in the hallway from the living room. Inside the transparent parallelepiped there is an art object for everyone to see – a fragment of a tree of a bizarre shape.

3. Lawn partition

Architect Yegor Kurilovich. Photo: Daria Lyskovets

An unusual floor-to-ceiling partition, reminiscent of a lawn with dense grass, not only zones the studio apartment, but also serves as an LCD TV holder.The frame of the structure, 160 cm wide and 20 cm thick, is made of a metal profile, sheathed with plasterboard and faced with a roll covering imitating a lawn. At the same time, all the wires of the home theater and TV are hidden under the casing.

4. Partition-fireplace

Architect and photographer: Artemy Saranin

The central composition with a biofireplace serves not only to decorate all zones of the studio apartment, but also marks the boundaries between neighboring “clusters”.

Lace wall

5.Glass partition

Architect Maria Mezentseva. Photo: Ivan Sorokin

In this case, the studio is zoned with a transparent decorative partition. Its length is exactly the same as the sofa in the living room. The glass of the structure is sandblasted with abstract patterns created according to the architect’s sketches. They are inspired by images of wind and waves, with different patterns on each of the three panels. The lower part of the partition is covered with wallpaper, which is covered with durable glass.

6. Tempered glass partition

Architect-designer Tatyana Zhivolupova, decorator Tatyana Evstratova, visualization: Anastasia Yashchenko

In the closed state, such a lace curtain, which is actually tempered glass with a pattern applied by sandblasting will separate the parents’ bedroom from the living room, but at the same time let in daylight.

7. Mobile screen and curtain

Architect-designer and visualizer Sofia Starostina

The bedroom and the living room, located in one room, were separated using a mobile screen and curtains.Zoning is also facilitated by wallpapers with the same ornament, but in different colors

8. Grille with ornaments

Architect and visualizer Maria Glagoleva

A transparent openwork partition visually separates the sleeping area, but provides insolation to the living room.

Matryoshka principle

9. Room in a room

Architect and visualizer: Natalya Tarasova

In this interior, with the help of a canopy and dense drapery, it was possible to create a “room in a room” – an isolated space for sleeping, reading and psychological relief …

10. Semi-transparent partitions

Design and visualization: Natalia Grishchenko and Anna Kashutina

A bathroom with partitions made of colored translucent tempered glass in lime color is a bold decision that presupposes a high degree of trust between apartment residents. Nevertheless, it provides dense draperies for privacy

11. Futuristic cube

Studio zi-design interiors, rendering Created in Space

Fasteners of frameless glass canvases are hidden in an L-shaped niche with illumination, which in the evenings will turn the sleeping area into a futuristic object.And with the help of translucent curtains along the inner perimeter of the cube, you can create a private space.

12. Lightbox

Architect and photographer: Artemy Saranin

The boundaries of the sleeping area, located in the center of the apartment, indicated by a thin welded metal frame with glass screens, will practically dissolve into space. And with the white textile curtains closed, the room turns into a kind of lightbox.

Mobile partitions

13.Shaded glass sliding partition

Architect, designer Irina Ilyina. Photo: Ivan Sorokin

With the open canvases of the sliding partitions made of shaded glass, the kitchen and living room spaces merge together, and when closed, they completely separate. In this case, it remains possible to get into the hall from both rooms.

14. Sliding partition

Architect: Svetlana Tyagovskaya. Photo: Daria Aleksandrova

Another option with transparent sliding partitions.In this case, the canvases are lined, clearly marking the boundaries between the kitchen and living room areas.

Textile partition

15. Textile drapery

Interior artist and visualizer Ksenia Krupenina

In this example, to isolate the kitchen from the seating area with a sofa and TV, the author of the project suggests using textile draperies.

16. Draperies in the openings

Architect-designer and visualizer Elena Bogatyreva

Cloth draperies tied in the center, hanging in open openings, visually separate the kitchen and hallway from the living room.

17. Neutral curtains

Designer Julia Lapteva, visualization Veronika Mitina

The room with a bay window was divided into a living room and a bedroom by means of sliding glass partitions and draperies. This mobile solution made it possible to combine the zones into one open space, where natural light will not be disturbed, and blackout curtains, if necessary, will help isolate the sleeping area. At the same time, the fabric is matched to the color of the gray walls and looks neutral on both sides of the partition.

Pass-through shelving

18. Geometric abstraction

Designers Ksenia Dubrovskaya, Elena Samarina, architect Ilyas Khalitov, Visualization: Ksenia Dubrovskaya, Elena Samarina

Pass-through shelving denotes the border of the room, but is also a storage system. Thanks to its “transparency”, the hall visually unites with the living room and is illuminated with natural light.

19. Functional partition

Head of the studio Elena Mizotina, design and visualization Elena Danilina

Pass-through shelving will help to isolate the living room from the bedroom and at the same time maintain the level of insolation of the room.Its shelves will house a collection of books and travel accessories.

20. Partition-rack

Architect and visualizer Vladimir Ivanov

A three-section pass-through rack will become a means of zoning a private room in this interior, which will separate the space intended for sleeping and rest from the working corner.

  • Prepared by: Anastasia Shneps-Shnepe
No comments yet. Start a discussion!

№ 11 (246) November 2020

Found a mistake? Select it and press Ctrl + Enter

IVD Site.ru is a leading Internet project dedicated to the reconstruction and interior design of residential premises. The main content of the site is the archive of the Ideas for Your Home magazine – exclusive author’s articles, high-quality illustrations, practical advice and lessons. A team of professionals is working on the project in close cooperation with renowned designers, architects and leading experts of the publishing house.

On our website you can find complex design solutions; view detailed reviews of the market for building and finishing materials, furniture, machinery and equipment; compare your own ideas with the design projects of leading architects; communicate directly with other readers and editors on the forum.

http://desmyhome.ru/sovmeshhennye-komnaty/peregorodki dlja-zonirovanija-komnaty /
http://happymodern.ru/razdvizhnye-pereoniroki- v-komnate /
http: // www ...pereplanirovkamos.ru/pereplanirovka-dvuhkomnatnoj-kvartiri.html

Glass partitions and doors in the interior of living rooms and offices

Glass doors and partitions in the interior of living rooms and offices

Stylish glass doors and partitions
– universal elements for quick changes in the interior or redevelopment of premises without capital investments. Translucent structures fit organically into any design of an apartment or office.And durable laminated or tempered glass covered with a film is safe to use. Advantages of stationary and mobile systems

Installing a transparent wall is zoning
spaces without loss in natural light and visual volume of any room. The issue of illumination is especially important for narrow, long rooms or studio apartments with one window. If periodically complete isolation of the selected area is necessary, then blinds or curtains can be hung on the glass partitions.From the existing range of curtain decors, it is easy to choose an option that suits the overall style of the room.

Glass prevents sound from penetrating
odors, moisture. With the help of stationary modules, the following are distinguished:

· children’s Corner;

· Kitchen or dining room;

· sleeping place;

· Living room;

Cabinet or
working sectors in the office.

By color, texture, stylized drawings
the translucent wall can be installed to match the existing interior.Or add a twist by transforming a boring design.

Portable designs with reliable fittings
for glass [/] transform the room depending on the situation. This is similar to installing fabric or plastic screens, but the glass looks lighter and more elegant. Safety of transparent structures

Translucent walls are made
from materials that have a safety certificate according to European Union standards. Glass partitions [https: // estetika-nsk.ru / catalog / steklyannye-peregorodki /] and doors and doors are made of laminated glass with intermediate layers of film (triplex). During operation, the modules calmly withstand heavy loads, and with a strong impact, the plates crack, but do not crumble into fragments.

The environmental friendliness of silicate glass is confirmed by
its natural constituents are sodium carbonate, liquefied sand, limestone. Substances do not emit volatile ethers and odors harmful to humans and animals.

Metal fittings for glass
doors and partitions from TM “Olimp” firmly fasten plates with stationary elements and between themselves.Accessories for swing, sliding modules or accordion systems are designed for operation up to 10 years.

Call and our staff will pick you up
reliable mechanisms for structures of various configurations.


Metal fittings for glass structures, doors, shower rooms, glazing systems

115191, Moscow, 4th Roshchinsky passage, bld.18 p. 7


Moscow region


4th Roshinsky proezd, 18, building 7

+7 (495) 150 42 58


Metal fittings for glass structures, doors, shower rooms, glazing systems

115191, Moscow, 4th Roshchinsky passage, bld.18 p. 7


Moscow region


4th Roshinsky proezd, 18, building 7

+7 (495) 150 42 58

Glass doors and partitions with reliable glass fittings

Stylish glass doors and partitions are versatile elements for quickly changing the interior or redeveloping premises without capital investment.Translucent structures fit organically into any design of an apartment or office. And durable laminated or tempered glass covered with a film is safe to use.

Advantages of stationary and mobile systems

Installation of a transparent wall is a zoning of space without loss in natural light and the visual volume of any room. The issue of illumination is especially important for narrow, long rooms or studio apartments with one window. If periodically complete isolation of the selected area is necessary, then blinds or curtains can be hung on the glass partitions.From the existing range of curtain decors, it is easy to choose an option that suits the overall style of the room.

Glass prevents the penetration of sounds, odors, moisture. With the help of stationary modules, the following are distinguished:

· children’s Corner;

· Kitchen or dining room;

· sleeping place;

· Living room;

· Office or work sectors in the office.

By color, texture, stylized drawings, the translucent wall can be set to match the existing interior. Or add a twist by transforming a boring design.

Portable structures with reliable glass fittings transform the room depending on the situation. This is similar to installing fabric or plastic screens, but the glass looks lighter and more elegant.

Safety of transparent structures

Translucent walls are made of materials that have a safety certificate according to European Union standards.Glass partitions and doors and doors are made of laminated glass with intermediate layers of film (triplex). During operation, the modules calmly withstand heavy loads, and with a strong impact, the plates crack, but do not crumble into fragments.

The environmental friendliness of silicate glass is confirmed by its natural components – sodium carbonate, liquefied sand, limestone. Substances do not emit volatile ethers and odors harmful to humans and animals.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *