Paper cut tools: Paper Cutting Tools | BLICK Art Materials

Содержание

11 of the best paper cutting tools, trimmers and knives

Guillotine. Paper trimmer. Rotary cutter. Craft knife. All of these pieces of equipment are suitable for cutting paper – so which is the best paper cutting tool for card making? As always it depends on the type of cards and quantity that you’re making. If you’re cutting hundreds of pieces of card for wedding invitations for example, a guillotine would be perfect as it has a flat base and a cutting arm that slices through many sheets at once. Each guillotine has a load capacity so don’t try to cut too many sheets at once. Use the paper clamp if one is fitted and bring the blade down slowly to avoid ragged edges.
      Heavy-duty rotary cutters have a circular blade that can cut through about five layers of paper at a time and, as the blade is circular, it’s also suitable for cutting other materials such as cork, foam sheet, corrugated card and even grey board. If you’re a hobby cardmaker then an A4 size paper trimmer can be all you will ever need. These can either have a rotary blade or a sliding blade, but which is the best paper trimmer for card making uk? The rotary blade definitely has a longer life but slider versions often let you add a scoring tool into the slider slot instead. This style of paper cutting tools allows for speedy cutting, accurate measuring with its retractable ruler and neat scoring – everything you need for perfect cardmaking!
How about the best craft knife for paper cutting? Should you prioritise getting a paper cutting tool knife that has inexpensive replacement blades for a fresh edge that is easily changed, or a high-spec blade that will last for all your projects? Get ready to craft with the option that is best for you with our pick of the 11 best paper cutting tools, trimmers and knives.

 

Best paper cutting tools for your projects: Paper trimmers

Fiskars 1-Piece 12-inch SureCut Deluxe Paper Trimmer

This is such an instinctively easy to use paper cutting tool and is a great choice if you work with larger pieces of paper. The cutting blade is housed permenatly in a guide channel, so you just slide it along to cut– as long as you keep the paper secure, your cut can’t go awry. And the trimmer has a host of features to make sure your paper stays secure. The fold-out extension arm helps support longer pieces of paper, giving you a longer cutting edge to butt your paper edge too, which makes this one of the best paper trimmers for card making uk if you like to work with 12x12in papers. The trimmer housing can be folded up when you are inserting your paper, then fold down to slide the blade across safely while the arm also helps hold your paper in place.

Latest deals from trusted retailers

Cricut Portable 12in Trimmer

Super-lightweight for portability, this sturdy plastic paper cutting tool packs a punch. You can change the blade in the slider arm to use for cutting or scoring papers, and there is a fold out extendable arm that lets you work with up to 15 inches. The trimmer is clearly marked with both both inches and centimetres, on the cutting guide and on the unit itself which makes it simple to measure paper in every orientation for neat and accurate corners. Really versatile tool for the price, this is the best paper trimmer for card making uk if you also want to take your tools out and about to workshops with you.

Latest deals from trusted retailers

Kit ‘N’ Caboodle 12 in Paper Trimmer

With its small cutting surface, and without an extendable arm, this trimmer is bet suited to cardmakers looking to cut accurate mats, as it does not work so well with the larger panels you may want as a scrapbooker. It is sturdy and easy to use, with a sliding blade housed in a strong clear plastic channel for durability with visibility. There is a scoring grid on the trimmer surface to help with scoring. We have heard that finding replacement blades for this paper cutting tool can be a problem, so buy a few spares if you choose this as your best paper trimmer for card making uk.

Latest deals from trusted retailers

We R Memory Keepers Circle Spin & Trim

Though this is a more specialist paper cutting tool, it is so useful for card making that it deserves ints spot in our list as the best paper trimmer for card making uk. Cutting perfect circles in different sizes has never been easier. The rotating handle makes cutting effortless, and the new base and hinge design keeps your craft desk uncluttered, as no cutting mat or die-cutting machine is required! Create circles in half-inch increments from one inch in diameter, all the way up to eight inches. The Spin & Trim features built-in blade storage, and with two blades included you can be sure of crisp cuts that give your cards a professional finish. This is such an easy way to make your circle easel cards, or quickly cut out circle apertures!

Latest deals from trusted retailers

Best paper cutting tools for your projects: Guillotines

Crafters Companion Small Guillotine

Here’s a handy A5 size guillotine that’s perfect for card makers. The curved stainless steel blade is based on designs from knife makers, and is self sharpening with every cut, so it glides through material with very little pressure.  The cutting surface has a recessed guideline grid, which you can use with the enclosed scoring tool to crafts accurate score lines alongside using the guillotine to accurately cut your paper and card. The clear finger guard protects your fingers from the blade when you are operating the guillotine but still lets you see where the blade is, and pushing down on this also helps support the paper you are cutting. We’ve had great results with this product, and the self sharpening blade has seemed to bear up its promise after continuous use!

Latest deals from trusted retailers

Fiskars 22cm Bypass Guillotine

Fiskars feature a lot in this list for a reason – their speciality is blades and they make long-lasting and reliable paper cutting tools. This A5 guillotine is no exception.The guillotine will cut up to 5 sheets of up to 80gsm thickness at once, which is great if you are mass crafting for wedding invitations or Christmas cards. As well as having inch and centimetre measurement running along the top and bottom edges, it has these across the centre of the guillotine too, which is very handy if you are working with smaller mats. There are also marking in both orientations to help cut A6 and A6 sizes accurately every time.

Latest deals from trusted retailers

Best paper cutting tools for your projects: Craft knives

Cricut TrueControl Knife

What sets the TrueControl knife apart from most other craft knives is the blade changing system. When you’ve used your knife quite a bit and the blade is not giving you as crisp as cut as it first did, turn the dial at the bade of the knife to unlock, and push forward to safely push out the spent blade, no touching of the sharp required. Similarly, the replacement blades are packaged so that you can slip the end into knife handle and lock it in place before pulling the new blade out of its packaging. As well as being much safer, this keeps any oil or dirt you might have on your hands away from your fresh cutting blade. This is comfortable and easy to hold and maneuveor with its soft grip – a light and precise cutting knife for card makers.

Latest deals from trusted retailers

Premier Craft Tools Craft Knife

If you like to work with extra-thick cardstock for 350gsm or above, it is best to choose a strong craft knife that has been designed to work with these thicknesses – like this tool from Hunkydory’s own brand, Premier Craft. The thick and strong blades work well with these thicknesses and this great value knife is a good choice. When not in use, store in the clear lid to keep your blade sharp, but when it does get less sharp from use, it is simple to change by twisting the knife handle to release. You then insert and new blade and twist the handle the other way to secure. The fact that it is so simple to switch blades and the price point of the replacement blades means it’s easy to always have a super-sharp cutting edge!

Buy from Create and Craft

Fiskars Premium Precision Art Knife

 

Do you think that the best craft knife for paper cutting is one that is where you expect it to be? Here is a clever idea that could change the face of craft knives forever – don’t make the handle circular, so the craft knife can’t roll off a craft desk but instead stays where it is put. It has a specially designed grip and soft touch holding points that still make it comfortable and accurate to hold for precise paper cutting. The lever release system makes changing blades quick and easy, and the 3cm stainless steel blade can cut through thin and thick materials such as paper, photo board, plastic or fabric.

 

Latest deals from trusted retailers

Best paper cutting tools for your projects: Rotary cutters

Fiskars Pivoting Rotary Trimmer

Not just for sewing and quilting, rotary cutters are great for comfortable and quick paper cutting. Used with a cutting knife and guiding the cutting wheel along a straight edge like a ruler, they can achieve guillotine-quality cutting with lots more flexibility, as you control the pressure, so can use for scoring with a light pressure, or to cut multiple sheets at once with a stronger pressure. This rotary cutter is especially good for papercraft, as the handle can be adjusted to 4 different cutting positions, which is great for control if you re cutting freehand shapes. It also works well for both right an left handed crafters.

Latest deals from trusted retailers

This is many crafters go-to rotary cutter! You can use it for cutting fabric as well as paper, and its durable rolling blade won’t get dulled by paper so will still cut fabric after using on paper and card. A great choice if you are a multi-crafter looking for a rotary cutter you can use across all your projects. If you think of the length of the cutting blade on a rotary cutter compared to the length of the butting blade on a knife, it’s no wonder that rotary cutters last as long as they do – wear and tear gets spread along that whole length.

Latest deals from trusted retailers

Cutting Tools for Paper Artists and Bookmakers

 

Once I discovered paper cutting, I started collecting any and every tool or knife I could get my hands on.

It wasn’t until I had tried a wide variety that I found my preferred knife, and which knives just didn’t work with my style. Some of them I have retained in my arsenal, utilizing them here and there, or maybe I just feel proud of the collection. Here is what I currently have in my toolbox:

 

1.     #11 X-Acto® Precision Knife. This is my favorite knife for paper cutting projects. However, always keep extra blades when working (see the container below the knife) as I find myself breaking the fine tip very easily. 

2.     Fiskars® Fingertip Detail Knife. I try to force myself to use this knife, but the switch from the long handle of my regular knife to this small, knuckle grip makes this a big change. I do enjoy whipping it out when I am in a tight spot for details, and I have heard that for many, this is a very comfortable knife.

3.     X-Acto Craft Swivel Knife. The small blade of this knife actually swivels 360° around. I bought it when I was told graphic designers love it for the ease-of-movement when cutting curvy shapes. I haven’t personally managed to wrangle the blade, and have instead set it aside, pulling it out from time-to-time for experimentation. (If you have any experience taming the swiveling beast, I would love some tips!)

4.     An Awl. Obviously, this isn’t a knife. But, I keep an awl in my kit because I love the look of varied texture from punctured holes. Also, if you ever want to create a small eyeball or “starry” background, use this, and save yourself from anguish. This specific awl has a very thin handle, but you might prefer one with a more bulbous, wooden handle. I use this one for paper cutting, and a bulbous, wooden handled awl for punching signatures when bookbinding.

5.     #2 X-Acto Medium Weight Aluminum Knife. This hefty handle is great for cutting out large shapes. It is especially good in those spots where you would use scissors but don’t want to take as much time.

6.     SliceTM Precision Cutter. Touting a ceramic blade that ‘lasts longer than steel,’ I found the blade to be shorter than I prefer. Their claim of strength is true, however, as I have yet to break this blade. I tend to keep this in my ‘to-go’ art bag because of its easy-to-store design and tight cap.

7.     A Box Cutter. Always have one around even if you don’t plan on cutting Davey Board. You never know when you may want to cut several pieces of thick cardstock down to size.

 

What are your favorite cutting tools? Do you have some unique or bizarre tools that you absolutely love?

 

Craft Tools for Cutting: See What They Can Do

No matter your hobby or creative passion, craft tools, especially those used for cutting, make it fun and easy.

Most lists of must-have craft tools, while helpful, list items for a very wide variety of crafts:

  • spinning wheels
  • sewing machines
  • paint
  • jewelry pliers
  • tissue paper
  • craft glue

However, most crafters don’t participate in all crafts (OK, so Martha Stewart does, but I think we can agree, she’s an anomaly), so many items won’t apply to each person.

There is a genre, however, that pretty much all crafters must have on their craft tools list: cutting tools. Most every type of craft involves some form of cutting, so requires some type of craft tool for that purpose.

Here we delve into Slice’s cutting arts and crafts tools and discuss what types of crafts they are particularly well suited for. From well-loved standards like scissors and craft knives to new discoveries and must-haves, here’s how you can beef up your craft tools supply.

Wait Up: Why Slice?

Slice has created some designs that are like no other, such as the Precision Cutter, the Precision Knife, and the Safety Cutter (more on those in a minute). Customers rave about how easy our craft cutters are to use and that they fill a need better than most—if not all—other tools they’ve previously used. This is likely because there’s nothing else like them on the market.

Slice tools are also safer than other cutters on the market, which almost exclusively feature metal blades. Slice blades are ceramic, made of extremely hard 100 percent zirconium oxide.

The advanced and proprietary shape of the blade is finger-friendly®—that is, resistant to cutting skin (unlike any other ceramic blade). This means that not only are these products great for crafters in general, they’re also appropriate for seniors, children, and others who may not be as steady or adept at using cutting tools.

Additionally, Slice blades last up to 11 times longer than metal blades. Metal blades dull quickly, which also makes them more dangerous and less precise as they age. Safer and great value: those are just some “that’s why Slice crafting tools” answers.

The Pen-Like Precision Cutter

An increasingly popular Slice cutting tool is the highly maneuverable Precision Cutter. This stylish wonder is held just like a pen, so it’s easy to use, even for younger people, for whom learning to use scissors can be a challenge. Its very small blade increases its maneuverability—read: it is fantastic with detail work—as well as safety. Think of it as a cutting instrument that moves like a drawing instrument.

Because of its small blade and precise nature, the Precision Cutter is excellent for any craft that calls for thinner materials like paper. Scratchboard artists sing its praises, and it is rapidly becoming one of their favorite scratchboard tools. Airbrush artists are using this tool for cutting frisket film. RC model makers will enjoy how well it glides through shrink wrap. Check it out:

As of 2019, Slice introduced a newer version of the Precision Cutter. This features the same micro-ceramic blade as the original green cutter, but now the blades are replaceable. If you’re interested in cutting performance, both tools cut the same way, so any review that applies to the 00116 Precision Cutter will also apply to the 10416 Precision Cutter (New).

Essential Crafting Tools: Scissors

As with all of the Slice products, the Ceramic Scissors utilize a ceramic, finger-friendly blade. This makes them a great substitution for the commonly underperforming safety scissors found in most grammar school classrooms.

This easy-grip tool can cut just about anything required for arts and crafts projects done with young ones. Construction paper, cotton balls, felt? No problem. Learn more about kids using scissors in “Children’s Scissors: Finding a Safe and Effective Pair.”

For adult crafters, the Slice Ceramic Scissors are excellent for cutting paper, vinyl, even copper wire. They are particularly useful for long, straight cuts. So not only are they great for everyday use, they also come in handy for scrapbooking or any other paper-based crafts, as well as cutting the rigid vinyl plastic sheets and appliqué paper used in quilting. Our 10546 pointed scissors are especially helpful if you’re initiating a cut in the middle of your material.

A Must Go-To: The Craft Knife

Part of the Precision Knives lineup, the Craft Knife features a longer blade than the Precision Cutter but is still very maneuverable and easy to control, and the handle features a no-slip grip. The Craft Cutter’s fixed blade is also replaceable.

If you need to know how to cut felt, the Craft Knife, as well as many other Slice craft cutters, can handle this material with ease.

In fact, this is a primo all-around choice for cutting a wide variety of materials: paper, RC model shrink wrap, quilting appliqué paper and vinyl, scratchboard, foam core, leather, vinyl and polycarbonate sheets, even crêpe paper. Watch it cleanly cut that last delicate material:

With its far-ranging usefulness, the Craft Knife is the go-to for most any crafter, from model makers to scrapbookers, home décor DIYers to leathercrafters. Read about how much master leathersmith Joshua Watts enjoys his Slice tools in “Choosing Leather Cutting Tools that Make the Cut.”

New in Craft Tools: The Precision Knife

This is another innovative Slice design, and the name says it all. The Precision Knife’s “ring” handle offers excellent control as well as comfort.

This tool features the same replaceable blade as the Craft Knife so is appropriate for many of the same uses. However, it truly shines in situations calling for really intricate work. It also works well for sculpting materials like clay, or for carving pumpkins.

The Small but Mighty Safety Cutter

This one-of-a-kind little powerhouse works great on paper as well as other thin materials like vinyl and polycarbonate sheets, frisket film, and the aforementioned quilting materials. The Safety Cutter lives up to its name: the blade is micro and the grippy surface means it doesn’t slip. Additionally, its design is ergonomic, so it fits naturally in the hand.

This tool is excellent for cuts that are less intricate. There’s even a little hole at the top of the cutter, and some people have been known to carry one on their keychain for on-the-go cuts, with nary a nick or injury. In addition to your crafts, use the Safety Cutter for items like coupons, envelopes, and packing tape.

What’s Your Craft?

There is a huge variety of crafting tools on the market. A walk through any craft store will confirm that. But one thing every crafter needs is something that cuts. And Slice has a tool for that. Do you work with an uncommon material or one not mentioned here and want to know what tool will work for you? Contact Slice and we’ll test out our cutting craft tools to find the best one (or ones) for the job.

Further Reading:

Paper Cutting

Welcome to MyBinding video. One of the most common office tools is the paper trimmer. And on the market, there is almost every kind imaginable. This video is designed to help you make the best decision for you.

A major, very popular, category is the rotary trimmer. The rotary trimmer is very quick and safe, quick in that it goes in either direction, so there’s no reset time. And they’re safe, because the blade itself is generally encapsulated in some kind of housing that keeps fingers far away. Many rotary trimmers have interchangeable blades that allow you to cut with different kinds of cutting patterns; straight or perforated, scored, and different kinds of wavy designs for textured looks or crafting. In the crafting or scrapbooking world, there are many multi-blade rotary trimmers. With these trimmers, there are multiple blades built into the same housing, and then you can just dial, or switch right into it as you go between project and project.

Home and small offices sometimes enjoy dual, or combination, trimmers. These trimmers come with both a guillotine-style trimmer and a rotary trimmer built into the same machine, or the same unit, for the versatility. These paper trimmers tend to be very lightweight and very portable, perfect for on the road or on the go or business seminars and conventions and things like that. They’re also fantastic for more advanced scrapbookers and crafters. There are also a couple of very portable hand trimmers.

And finally, there’s the ever popular guillotine-style trimmer. These trimmers go from very small to very large. The majority of them are built for the office or institutional use. They’re built for longevity and precision and can generally handle a lot more paper at a time, as well as much larger sizes of projects. The open blade can sometimes be very dangerous, so it’s not good for the kids or the classroom. And they are limited to just the one cutting pattern.

A very important note are the measuring tools. Not all trimmers are created equal in this fashion. They will all have some kind of measuring tools but some of them are far more helpful than others. Some have built-in or removable fences. This keeps papers in line and allows for consistent cutting over and over through a single project. Just keep in mind that the more measuring tools you have, the more precise and flexible you can be in your process.

Happy trimming! For more demos, reviews, and how-tos, check out MyBinding.com.

Client Tool | PaperCut

Hey, you’ve landed on a page that we’ve updated and made even better! Go see the new section on our website called Discover.

This Discover section provides you with everything you need to know and covers stories and practices on how our customers use our solutions to get the most out of their printing, scanning and copying environments.

Start your tour in Discover

All topics are covered in the new section, but we may have written a page or two before our morning coffee, so we’ve left these pages active just in case 🙂


The client tool is an optional software component that runs on users’ workstations. It is not required to
track printing because PaperCut tracks printing at the server-side. The user client provides services to users that
enhance the print tracking experience.

  • Display the user’s printing credit in real-time
  • Provides a convenient link to open the user web interface
  • Assist in message delivery, such as “printing denied” messages
  • Provides access to advanced features such as the ability to allocate print jobs to shared/group accounts

The balance window of the user client tool


The client tool does not need to be installed as it can be deployed with zero-install methods that run
directly from a network share. It is available for
Windows, Mac and Linux desktops.

Print notifications

  • Notifies users when their printing is denied and explains why
  • Notifies users when their balance is low
  • All messages are fully customizable


Client tool – low balance notification

Print confirmation


When a user prints, PaperCut may optionally display a popup with print job information including number of pages,
color/grayscale information, the job’s cost and its document name. Users verify the print job and can choose to
print or cancel it. This process reduces waste by reducing the number of incorrect/accidental print jobs.


Client Tool – confirmation

Print account selection


Some organizations may wish to track printing at a more detailed level than just by user. The client software
allows users to charge printing to shared accounts. Examples include:

  • Staff in a school charging to department or faculty accounts
  • Businesses allocating printing to cost centers, projects or clients


Client Tool – account selection


Some features of account selection include:

  • Selecting accounts from a list or by code/PIN
  • Account access may be controlled using domain groups
  • Associate comments with print jobs (advanced option)
  • Apply individual job discounts (advanced option)


Client Tool – advanced option

PaperCut MF also lets you select your account at the MFD when releasing a print job with Secure Print Release.

Manager Mode Popup


The Manager mode popup is designed to allow authorized users to:

  • Charging printing to any user (or shared account)
  • Apply standard cost adjustments to print jobs (e.g. for special paper, binding, etc)
  • Apply custom cost adjustments
  • Enter a comment (recorded in the print log)


The Manager mode popup is commonly used in “print rooms” where the staff print on behalf of other users and
can charge additional fees for services like binding, color or photo paper, etc.


Client Tool – manager mode

Cutting Tools – Guild of American Papercutters

Papercutters use a variety of cutting implements including small scissors, the ubiquitous Xacto/Excel craft knives (especially #11 blades), medical scalpels and even sheep shearing scissors!  Actual scalpels used by surgeons are popular and used, and available from Cincinnati Surgical and Swann-Morton Surgical (#15a, 10a and 11 blades are the most used scalpel sizes). For extra control, Fiskars Fingertip Precision / Detail Knife uses standard #11 blades as well. Zamberg offers sturdy and precise steel clippers in a small, 7-piece stainless steel manicure set for men. Also offering blades,

Fiskars Fingertip Precision / Detail Craft Knife

knives and scissors of various sizes and finenesses are Paper Panda (UK) and MicroMark, specializing in small hand tools. For specialized uses such as punching, cutting papeles picados, etc., punches are used with a small hammer. Prefabricated punches for various shapes and patterns are available from Joann and other hobby/crafting suppliers. Sets of round die punches (“hollow punches”) can be used to create perfect small circles for stars or other effects. A small set of these can be purchased relatively inexpensively.


Polish papercutting traditions include the use of large (13.5″) sheep shears to cut delicate paper patterns; in this video, Guild Member Carolyn E. Guest demonstrates how she uses her 13.5″ long sheep shearing shears to cut extremely intricate papercut artwork. (This video is the first of three; for the others, go to YouTube and access directly.)

Papercuttings by Alison was a longstanding, beloved source for tools and other papercutting helps, including an amazing array of templates and guides. Now defunct. See our Tribute Page to Alison Tanner and Gloria Cosgrove, and if you can contribute photos, please contact us!

Paper Cutter Blade Sharpening & Care Guide: Colter & Peterson

The best results in paper cutting (as in anything else) begins with selection of the right equipment. This is especially true with the guillotine knife in a industrial paper cutting machine. An inferior quality paper cutter blade inaccurately ground with an incorrect bevel may not only result in a poor quality product being produced, but could increase costs and even damage a commercial paper cutter. 

Selecting a paper cutter blade

Selection of a paper cutter blade is critical. Always buy from a reputable manufacturer or supplier, one who is aware of the latest developments in paper cutter blade sharpening and has enough experience to provide your shop with support.

Blades for guillotine paper cutters are available in three major types. (While some manufactures have developed other variations of paper knives, they are beyond the scope of this article).

  1. Standard steel knives
  2. High-speed steel knives
  3. Carbide knives

The difference in paper cutting knives is in the type of steel used in the inlays. While standard steel knives have been and will continue to be an acceptable type of knife, the popularity of high-speed steel knives have grown due to their improved performance, both in the quality of cut and increased life between grindings.

High-speed knives cost about twice as much as standard knives, but as they can last 2-3 times longer between sharpening.  The additional cost can easily be offset by the reduction in knife change time and knife sharpening costs.

Carbide knives provide the best quality edge and last even longer than high speed steel knives, but they are the most expensive (often 3-4 times the cost of high-speed knives) and require special grinding equipment to sharpen (also 3-4 times the cost of sharpening high-speed knives). 

They are also very susceptible to chipping and due to their high cost, are only recommended for operations that are consistently cutting the same type of material such as fine paper, where the chances of damage from material is minimal.  Carbide knives should NEVER be used when cutting any type of recycled material.

Paper blade bevel, length and angle

Knife manufacturers vary only slightly in their recommendations for a standard bevel (24° to 25°). There are times when a different bevel or even a double bevel is advisable, depending on the material to be cut.

The following chart illustrates some of the different bevels and will serve as a guide for obtaining the correct bevel for a particular material.  Knife suppliers and machine manufactures all have information available to assist in determining the correct bevel to use with hard-to–cut materials.

Figure 1: Paper blade bevel guide, by material to be cut

Material to be cut Paper Knife a b h (mm) Pressure false clamp plate
Bible paper HSS, HM, UFK*  24°     1500-2000 false clamp plate
Double waxed papers HSS, HM, UFK 24°     3200 **
Printing papers, regular HSS, HM, UFK 24°     2500 false clamp plate
Duplex papers HSS, UFK 24° 26° 2,0 3000-3500 **
Flimsy HSS, HM, UFK 19°     3000-4000 false clamp plate
Label papers HSS, HM, UFK 24°     3500-4000 **
Felt-cardboard HSS, HM, UFK 24°     2000-2500 false clamp plate
Photographic papers HSS, HM, UFK 24°     2500-3000 **
Gummed papers HSS, HM, UFK 24°     2500-3500 **
Carbonizing papers HSS, HM, UFK 19°     400 false clamp plate
Carbon papers HSS, HM, UFK 22°     800-1000 **
Art papers HSS, HM, UFK 23° 25° 3,5 3000-4000 **
Plastic fiber paper HSS, UFK 26°     2500-3000  
Blotting paper HSS, HM, UFK 19°     2000-2500 **
Metallic papers HSS, HM, UFK 24°     3000-3500 **
Parchment paper HSS 24°     2500-3000 **
Glassine paper HSS 24° 26° 3,0 4000-4500  
Stencil duplicator paper HSS, HM, UFK 19°     3000 false clamp plate
Writing papers HSS, HM, UFK 24°     2500-3000  
Tissue paper HSS, HM, UFK 19°     2000 false clamp plate
Autocopying paper HSS, HM, UFK 24°     800-1000 **
Transparent papers HSS, HM, UFK 24°     3000-3800 **
Velours papers HSS, HM, UFK 19°     2500 **
* HSS = high-speed steel knives
HM = carbide-tipped knives (normal: 23/25°)
UFK = ultra-finest grain hard metal (normal 22/25°)
** Compensation of differences in height is necessary

Source: Polar-Mohr® “Cutting in Practice”

Download Polar Mohr’s knife bevel guide showing in detail the recommended knife angle for every type of material to be cut, from paper and cardboard to plastics and packing materials.

Keep the paper blade sharp to save money and time

After selecting a good quality knife, it is equally important that the knife be kept sharp at all times. A dull paper knife is an unnecessary waste, especially in a competitive market. It must push its way through the cutting material and when dull, requires up to three to four times more force than a sharp paper knife. A dull knife increases energy usage, wears the paper cutter prematurely and drives up other production costs due to inferior work.

A lift cut with a dull knife has a rough, burry, at times “sealed” edge.  This can be quite expensive, as it creates separating problems in subsequent operations like feeding on a folder.

When to change paper knives: know the signs

How do you know when your paper cutter knife needs sharpening? It’s the responsibility of the paper cutter operator to know when a paper knife change is necessary—so he or she must be able to recognize the signs of a dull knife.

A general reference is to change the blade:

  • every 2,000 cuts using a standard knife
  • every 4,000 cuts using a high-speed knife, and
  • every 12,000 cuts using a carbide knife. 

Despite these guidelines. it may be necessary to change the blade if the knife appears dull.

Signs of a dull paper cutter knife include:

  • Diminished cut quality and appearance of material surface
  • Change in the sound of the knife going through the pile
  • A burnish on the face of the cut material

Any of these signs should indicate to the experienced paper cutter operator that a knife change is in order. Cutting coated stock, board or plastic material will dull a blade more rapidly than cutting standard uncoated stock and other fine paper. The more abrasive the nature of the material being cut, the faster a knife change becomes necessary.

Some job problems are related to inaccuracies in loading the paper or settings on the paper cutting machine. See our Commercial Paper Cutting Troubleshooting Guide.

Lengthen the life of your paper cutter blade

Frequent knife grinding will materially lengthen the life of the knife, saving you money in the long run.

The magnified cross section of a paper blade in Figure 2 shows that only about 1/32” of the metal is removed in order to re-establish a keen cutting edge—as long as it’s done when sharpening first becomes dull.

Figure 2: Diagram of paper blade sections

Source: Polar-Mohr® “Cutting in Practice”

 

If the paper knife is permitted to become extremely dull, which occurs at an accelerated rate once the sharp edge is worn off, a great deal more (up to ¼”) must often be removed to restore a keen edge.

If the paper knife becomes very dull, you can be charged for the additional time required to restore its edge. If you permit the paper cutter knife to become extremely dull, only a few sharpenings can be made before the knife becomes too short for further use. You are literally grinding your knife investment away.

The cost of changing knives can be seen in this light too:

Let’s assume a 45” paper cutter costs about $120.00 per hour to operate. It takes approximately 10 minutes to make a complete knife change cycle, so a knife change in this scenario would cost about $20.00. A 26” x 40” folder has an hourly cost of about the same as a paper cutter. Misfeeding the folder (resulting from “sealed” or burred edges caused by a dull knife) could cost more than a knife change.

Just one bad feeder jam-up, resulting from misfeeding or feeding doubles, could certainly take more time to clear up than the cost of a knife change and a number of small jam-ups will, of course, have the same result.  If you are cutting paper to feed a press, this situation becomes even more costly.

Any way you figure, it pays to keep a sharp blade in your paper cutter.

Methods for changing paper blades

The procedure for changing knives will vary depending on the make and model of the cutting machine. But no matter the cutter, the majority of operator accidents happen during the knife-changing operation. It’s extremely important that each operator develops good safety habits, follows the manufacture’s procedures and be provided with a safe machine. 

The knife on a 45” paper cutter weighs about forty pounds. If it slips and catches a hand or a finger between it and the table, no imagination is needed to figure out what will happen.

Modern paper cutters have safety devices built into them to reduce this danger. Even so, carelessness will negate even the best safety devices. 

Following these blade sharpening safety recommendations should reduce the risk of accidents, regardless of the age and make of the paper cutting machine:

  1. Place an empty knifeboard on the cutter table before removing the dull knife from the machine. The knife can then be secured to the board immediately upon its removal.
  2. Always use the proper knife handles, making sure they are properly installed.
  3. Never allow the sharp edge of the knife to be unnecessarily exposed in a manner that could lead to it being accidentally contacted or bumped.
  4. Know and follow the manufacture’s procedures when changing knives.

Remember, keep handling of the unprotected knife to a minimum. By insisting that your operators follow the correct procedures in caring for your paper cutter blades, you will minimize danger to the operator, save time and money and increase the quality of your work.

See our guide to Commercial Paper Cutter Safety: Standards and Accident Prevention for more safety tips.

Get in touch with a paper cutter expert

No matter your level of experience with paper knives, reaching out to a pro can help. Contact us with any of your knife grinding or handling questions and we’ll get you in touch with the experts at Tri-State Knife Grinding. They’ve spent 65 years perfecting paper knife sharpening and use state-of-the-art sharpening and honing machines operated by only the most experienced knife grinders. It’s how they deliver the highest quality precision grinding and professional services every time.

Ask about sharpening services or purchasing paper knives, slitters, sheeter blades, trimmers, cutting sticks, saw blades and paper drills.

 

Related Articles:

Commercial Paper Cutting Troubleshooting: Problems and Solutions

Paper Cutter Safety: Standards and Accident Prevention

Finding The Best Industrial Paper Cutter: What You Need to Know, Part 1

Paper cutting tools | scraboo.ru

Paper cutter – a device for fast and even paper cutting. Very useful for designing scrapbook pages and postcards. The cutter allows you to cut a sheet of paper as evenly as no scissors can cut.

According to the method of influencing the knife, cutters are divided into mechanical (manual) and electrical. In turn, hand cutters are available in roller, saber and guillotine types.

Roller cutter (aka disk cutter or trimmer) is a rectangular base (work table) along which the cutting mechanism moves along the guide.It, in turn, consists of a sharpened metal disc enclosed in a protective casing. When cutting, the paper is caught between the roller cutter knife and the counter knife (a hard metal plate attached to the end of the platform on the side where the cutter moves). This cutter is ideal for working with a small amount of paper – up to 10 sheets, it comes in different sizes, the most common – 22.5 x 12.5 cm; 31 x 31 cm; 20 x 46 cm. It takes up little space and has a valuable quality – the ability to cut an edge less than a millimeter wide, which allows you to work with maximum precision.In roller cutters, knives are not re-sharpened, although they are called self-sharpening. They just need to be changed after a certain time.

Reciprocating cutter is named because of a knife that looks like a saber. The reciprocating cutter is the most powerful and is used to work with a large volume of paper, but their accuracy remains within 0.1 mm. Reciprocating cutters have a slightly different operating principle. A sharply sharpened cutter knife is fixed on one edge (to avoid injury, it is covered with a protective cover), on the other, it has a handle.Lowering it, cut the paper. The knife in the saber cutter can be sharpened, although this procedure is not as simple as it seems at first glance. In addition, using a reciprocating cutter is much more difficult than using a roller cutter. You will have to work hard to get the perfect result.

The guillotine cutter is used for large print runs and is perfect for large print shops. Such a cutter is manual, semi-automatic and automatic. Its working mechanism (a sharply sharpened heavy knife of the cutter) is located on a massive table and is driven by a lever or an electric drive.The blade moves not only from top to bottom, but also obliquely along the cutting line and is capable of “processing” impressive bundles of sheets up to 8 cm. At the same time, the accuracy reaches fractions of a millimeter. When the cutter knife becomes dull, it is removed and sharpened, and after a few sharpenings it is changed.

Model knife is used for cutting paper, sharpening pencils, and is also necessary for cutting out small parts and complex shapes. It is a thin replaceable blade similar to a feather with a protective cap.When working with such a knife, you must have a mock-up mat (cardboard, hardboard or plywood) so as not to damage the table on which you are working.

Roller model knife allows you to quickly and effortlessly cut paper, as well as make a variety of shaped cuts with special attachments.

Circular knife is used for cutting circles with a diameter of 10 mm to 150 mm. Ideal for making postcards and round scrapbooking.The knife is an axis with a needle and a movable leg on which a blade is installed, by means of the rotation of which a circle is cut. Also on the movable leg there is a scale designed to select the diameter of the cut out circle. It is necessary to work with a circular knife on a mock-up rug. Make sure all screws on the compass are tightened before cutting.

Shape cutter easily cuts any shape according to a special stencil, it is irreplaceable when creating decorative elements for pages and postcards.Some models of shaped cutters can be used without a stencil. When working with such a cutter, you must have a mock-up mat so as not to damage the table on which you are working and be sure to check the health of the blade, if necessary, adjust it in accordance with the density of the selected material.

I hope the review will be useful. We wish you all a good mood!

Paper cutter | www.samsmasteril.ru

This homemade product can be useful for anyone who works with paper or cardboard.It does not require a lot of money. But with careful work, it will provide a “clean” cut of any paper size.

Before we start discussing the topic, I note that today we will be talking exclusively about the straight cut of one sheet of paper. And now to the point.

Each of us at least once in our life faced the need to cut paper (cardboard). What tools do we use for this? Scissors, of course. If you need a more or less even cut, then a knife and a ruler are used.For absolute cleanliness of work, it is better to use a proprietary cutter. Let’s see what are the advantages and disadvantages of each of them.

Scissor

This is the simplest way to cut paper. It is convenient for small volumes of work and relatively small cutting lines. It is extremely difficult to make high-quality and longer cuts with them.

Conclusion: despite the cheapness of the tool and ease of use, scissors can only be used to obtain small cutting lines.

With knife and ruler

Definitely, this method of cutting paper is more suitable for long cuts than scissors. You just need to have certain skills and dexterity.

For this, you can use any well-sharpened knife that will not jam and tear the paper. But it is better, of course, to use a utility knife, or a knife for construction work with retractable blades. It must be free of play so that the tool cannot move away from the guide fence.

Regarding the ruler. To choose, no doubt, you need a steel one. When working with wooden or plastic rulers, there is a risk that the knife will “burrow” in them, and this will not have a very good effect on the final quality of the cut.

So, we can again talk about the low cost and ease of use of tools. However, when working with them, difficulties arise with fixing a long ruler, and at the same time, the risk of injury increases.

Factory cutter

Its use is more convenient and efficient in all cases.Moreover, the stores offer a huge number of various types and types of such cutters: roller, saber, guillotine, etc., designed for cutting paper from A4 to A1, as well as excellent in price and quality.

And, as a rule, people who are seriously fond of or are professionally involved in working with paper and cardboard try to purchase just such devices. However, there is also a big disadvantage here – the price of the instrument. While many hand-maders can afford small cutters designed for small paper sizes and weight, more serious tools for cutting large paper sizes, for example, 70×100 cm, are no longer available to everyone.Moreover, it is possible to recoup such an acquisition only by cutting paper, as they say, on a “production” scale.

Homemade cutter

Not having the opportunity to buy a branded cutter, many craftsmen come to the idea of ​​creating a tool at home. Everyone who took up this business has their own method of assembling a homemade cutter. The internet is full of different ideas. Based on them, I made my own instrument. And I want to share this experience with you today.

Construction

I myself am engaged in the production of photo albums. Most often I use in my work binding and design cardboard, design paper and tracing paper measuring 70×100 cm.

Choosing the design of a homemade cutter, I first decided on the requirements that, in my opinion, it had to meet. It is:

  • cutting paper of different density, 70×100 cm;
  • simple design and inexpensive components;
  • acceptable cut quality.

On the Internet I found a rather interesting version of a cutter made of two metal rulers. The author of the idea is Evgeny Kuznetsov. However, testing of this cutter has shown that it is not quite suitable for cutting thick paper or tracing paper. I had to continue searching. The adaptation of another author, unfortunately, I do not remember his name, prompted me to make a more complex design.

Base

Found an old sketching board that has been ventilated in the fresh air for the past few years.I put it in order by sawing off the frayed edges and made from it the basis for the future cutter.

Knife guide

Steel 100 cm ruler, however, shortened by 20 cm, was just right for the knife guide. To give it rigidity, a duralumin rule for construction work was also purchased. It also had to be shortened to the size I needed.

Now it was necessary to securely attach the ruler to the duralumin rule. This is where the duralumin rivets, once presented to me by a colleague, made back in the Soviet Union, came in handy.

For better fixation of the ruler, I made guides from the bolts. At the same time, the holes for them were drilled with a slightly smaller diameter than the bolts themselves. This helped to screw them more tightly into the board. Additionally, I fixed the bolts with nuts with special bushings that prevent spontaneous loosening.

I pulled the ruler from above with wing nuts, which are well twisted by hand. I put the springs on the bolts under the ruler. If you unscrew the lambs, the spring-loaded ruler rises, freeing your hands to work with the paper.

Note that with the selected length of the cutting line, even a 2 cm thick rule can bend after clamping the thumbscrews, and so that the sheet of paper does not slip, it is better to hold the ruler in its central part with your hand.

By the way, to make it easier to position the sheet of paper perpendicular to the ruler, I additionally secured an aluminum corner. On its part, fixed on the side of the working part of the ruler, I also placed an aluminum square with stops for a sheet of paper. If you fix this stop with a clamp on the corner, then you can position the sheet of paper before fixing the ruler much faster.

Substrate

I chose glass from a furniture wall as a backing for cutting the paper. Although it is better, of course, to order glass of the required dimensions with processed edges in the workshop.

On the board of the cutter, from the side of the working part of the ruler, glued sheets of fiberboard to align the height difference with a glass substrate.

When I need to cut thick binding board, I use corrugated board as a backing. The length of the guide bolts allows for this.

The only drawback of this cutter, which I cannot but mention, is a slight backlash of the rule on the guide bolts. It must be taken into account when tightening the thumbscrews to fix the sheet of paper. Backlash appeared due to a mismatch between the diameter of the bolts and the diameter of the mounting holes for the bolts in the rule. But this is rather a flaw in the design, rather than the technology for its manufacture.

Well, that’s all. You can use such a device as a stand-alone cutter or in combination with a small-format factory cutter.But this is in case you need a more accurate adjustment of the sheet sizes.

Yuriy Lymar, Novomoskovsk, Ukraine. Photo by

Circular knives for cutting paper

Circular knives are quite versatile and can be used in all areas of industrial production, from the metallurgical industry to woodworking, as well as in everyday life. However, the most widespread are circular knives for cutting paper, which are simple and reliable in operation, and also have a huge productivity, therefore they are used both for processing waste paper and for cutting various types of paper products, including cardboard.

The paper knife is strong enough, and its working surface is made of alloy steel, which perfectly tolerates temperature changes, and is also resistant to mechanical and chemical influences. The disk knife for paper, as a rule, has a removable working surface, which allows it to be quickly replaced if necessary. However, it must be remembered that even if a set of knives is available, even with proper use, they will last for a short time.In order to maintain their efficiency and inefficiency of production, it is necessary to periodically sharpen paper-cutting knives, which significantly prolongs their service life.

As a rule, forged knives are used in the pulp and paper industry, which have increased strength and durability. In this case, a knife for cutting paper, if it is made in the form of a disk, has only a working forged part. At the same time, flat paper cutters can be made by forging or casting.

Not a single knife factory is limited to the production of narrow profile products, and today the enterprises of this industry produce knives, the scope of which can be very diverse, from the metallurgical industry to agriculture. So, Yekaterinburg knives have proven themselves in the woodworking and pulp and paper industries, they are widely used in road facilities, in the furniture industry, in the manufacture of packaging and plastic containers.Planing knives are widely used in the processing of various types of wood, as well as to obtain shavings, which are subsequently used in the manufacture of fiberboards. The roller knife, on the contrary, is most effective in metal processing and is used, as a rule, for cutting rolled products with a thickness of 0.7 to 4 mm.


Previous articles:

Similar articles:

Next articles:


Cutting tool knives machine manufacturer paper cutting machine, plastic blades Machines and tools for processing and other industries

1.Material: D2, HSS, 9Crsi …
2. Hardness: HRC48-68
3. High surface precision, burr-free
4. More than 10 years professional manufacturing experience

5. Strict quality management system
6. Small orders are accepted.
7. OEM & ODM
8. Standard Model: ISO / CE / SGS / SASO

Currently our product list:

1, lithium electric power industry, mainly including: Cutting circular, cutting knife blade, coil excitation
Pneumatic cutting knife, ear pole piercing For molds, cutting knife cutting dies, molds such as
As battery encapsulation mold cutter.

2. Knives for the photovoltaic solar industry. It mainly includes: EV cut gas welding,
Trim cover and so on.

3. In this document of the packaging industry knives. Mainly include: Pneumatic cutting tool for frame parts
And finished products, blade teeth, cutting and knife etc.

4. Knives for rubber and plastic industries. Mainly include: Belt, tire, plastic products and auto parts
Cutting and powder knife.

5. Knives For the electronics industry. Mainly include: Copper plate, PCB, tape protective film, electronic
components and other cutting knives.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *