These Waterproof Over-The-Knee Boots Make Rainy Days Way Easier
Rainy days can really put a damper on our style. Trying to incorporate classic clunky rain boots into a decent outfit is a marathon we really hate running in the mornings. Lugging around an additional pair of shoes in addition to our favorite pointed-toe flats or suede ankle booties we normally wear is also a pain. On the flip side, we are certainly would never risk ruining our favorite shoes in the rain so we end up settling for rubber boots and pushing our favorite outfit back a couple of days.
But we just found a secret weapon to beat the weather in style. The Blondo brand creates footwear that aims to be stylish and entirely waterproof. Their gorgeous shoe designs could end our awkward relationship with the rubber clunkers and eliminate lost street style opportunities on soggy days.
Each Blondo shoe is authenticated by the AquaProtect seal, which means they are made with high-quality waterproof leathers and other materials meant to seal our feet in and keep the moisture out. Not only is the leather waterproof, but it is also is designed to prevent the harmful effects of calcium/salt which can often erode the material over time. We also love that all Blondo footwear has a regular sole plus a removable activated carbon foam insole meant to provide comfort, eliminate odor and give extra warmth during chillier months. If that isn’t enough cushion, an extra gel pad at the heel puts the icing on the cake for all-day wearability.
But we know what you really want to know: Are these waterproof shoes actually cute? The answer is yes and we need so many pairs.
Check out the Kali Waterproof Over the Knee Boot, which is a fashionable faux suede tall boot we can wear with so many different clothes in our closet.
See it: Scoop up the Blondo Kali Waterproof Over-the-Knee-Boot while it is available in select sizes for $200.
Traditionally, we would not even think of whipping out suede or faux suede shoes on a rainy day since water could ruin them forever. Strutting down the streets in these faux suede beauties, no one would ever guess that they are actually waterproof and will be just as cute and wearable when the rain stops! The Kali design has a three-inch chunky heel, a 20-inch boot shaft which gives the over-the-knee height we love and an easy pull-on style thanks to simple ties at the back.
Shoppers who own these boots vouched for their comfort and were also excited by how well they fit. People seemed especially into the fact that this style has a narrow toe design yet it doesn’t fit too tight. One reviewer shared that the boots were the perfect choice after a long hunt for options that fit over her calves. Another expressed that she liked these a little better than some more expensive boots she already owned.
On days when we want to pull off a similar look but prefer not to wear a heel, there is the Blondo Ethos Over-the-Knee Waterproof Stretch Boot.
See it: Grab the Blondo Ethos Over-the-Knee Waterproof Stretch Boot while it’s available in select sizes for $225.
Like the Kali boot, this Ethos version is an easy slip-on pick. An incredibly short heel makes it even more walkable and wearable for long durations. Ruffles along the side give the boots an extra touch of personality and add just the right detail to make the boots stand out. We also adore that this Blondo boot has a memory foam-cushioned footbed. Translation: We’ll be looking like bombshells in this boot and practically walking on clouds!
We will be wearing these with a pair of skinny jeans and a frilly blouse to play up the ruffle detail on the boots.
Anytime we want to step out in something other than classic black, we can pull on these gray Blondo Danny Over-the-Knee Boots that allow Us to stick within the neutral hue family while switching up our look.
See it: Get the Blondo Danny Over-the-Knee Boot (marked down 35 percent off its original $260, now $170) while it’s available in select sizes.
The Danny boot also boasts a very short heel and a pull-on style. We love how this version has an asymmetrical shaft design that gives it a slightly trendier look. Shoppers who own these boots say that they’re great for walking and often receive lots of compliments on this style. People bought these boots for themselves but also gifted them to others.
These boots are selling out and quickly. Make a quick move if you want to snag that must-have pair.
See it: Scoop up the Blondo Waterproof Over-the-Knee Boots while they are still available!
Check out more of our picks and deals here!
This post is brought to you by Us Weekly’s Shop With Us team. The Shop With Us team aims to highlight products and services our readers might find interesting and useful, such as face masks, self tanners, Lululemon-style leggings and all the best gifts for everyone in your life. Product and service selection, however, is in no way intended to constitute an endorsement by either Us Weekly or of any celebrity mentioned in the post.
The Shop With Us team may receive products free of charge from manufacturers to test. In addition, Us Weekly receives compensation from the manufacturer of the products we write about when you click on a link and then purchase the product featured in an article. This does not drive our decision as to whether or not a product or service is featured or recommended. Shop With Us operates independently from advertising sales team. We welcome your feedback at [email protected] Happy shopping!
The 5 Best Knee High Rubber Hunting Boots Reviews Of 2021
If hunting is in your blood, you should make sure that you got the best accessories with you when you are into the wild. And, when it comes to accessories, the first of many things you need to keep in mind are your hunting boots.
These should be of top-notch. You can compromise on the quality of the knife or the gun but never ever compromise on the hunting boots for the rough terrain.
If you thought hunting boots are similar to hiking boots, then, good luck with your first outing! Hiking boots are hiking boots; they don’t even come near to the quality of the hunting boots.
Also, when you are looking for hunting boots, make sure you get the ones that come up to your knee and not just the ankle.
Tips On Choosing Best Knee High Rubber Hunting Boots
Here are a few more features that you should look for in the best knee-high rubber hunting boot:
1. Apart from the fact that the rubber hunting boots should reach your knee and everything, it should be built in a way to withstand the toughest terrain.
You will have to walk through a lot of rough places, jungles, and rocky hills, and this will require boots that are well built. Most importantly, you should get the ones that guarantee full insulation.
It will help you when you go on an outing during the winters. Your feet will be protected in the cold weather.
Muck Boot Arctic Sport Rubber Boots
- Shaft measures approximately 14. 5″ from arch
- Heel measures approximately 1.25″
- Platform measures approximately 0.75″
- Boot opening measures approximately 15.5″ around
2. Since you will have to walk for miles or camp in forests, it will be best to give your calves some rest so that you are prepared to walk the next mile without getting tired. The best rubber hunting boots come with neoprene gusset so that it provides maximum comfort to your calves.
LaCrosse Men’s Alphaburly Boots
- Lug Sole sole
- Shaft measures approximately 16″ from arch
- Boot opening measures approximately 16″ around
- Hand-laid premium rubber over a 3.5mm neoprene core
3. Hunting boots are known to be heavy because of their size and the material with which they are made but what you should be looking for is a lightweight boot.
Remember, you will have your backpack to carry and maybe run after the animal or bird that you are targeting. So, try to get a boot that is lightweight because it can become heavier if absorbs water while crossing a lake.
Muck Boots Arctic Ice Extreme Boots
- Synthetic sole
- Shaft measures approximately 14″ from arch
- Boot opening measures approximately 15.5″ around
- 8 mm neoprene provides comfort and flexibility
4. Coming from the fact that the hunting boot will absorb water, it is a thumb rule that you should use a hunting boot that is completely waterproof. There are many brands that provide waterproof hunting boots only till the ankle.
That shouldn’t be the case. You will find hunting boots that are completely waterproof to the knee and they are lightweight at the same time.
Rocky Waterproof Snakeproof Hunting Boot
- Rubber sole
- Shaft measures approximately 14.75″ from arch
- Platform measures approximately 1.0 inches inches inches inches inches
5. Hunting boots should be very comfortable to wear. With the unknown terrain ahead, you never know what it is in store for you. But if you want to keep your legs free from leeches, then make sure that your leg fits well inside the boot.
The cushioning in the footbeds and mid-soles will make it easier. Some of the boots also come with comfortable fit locks around the ankle and heel along with adjustable gusset so that you can rest your legs from the tight grip of the boots.
Bogs Mens Classic High Boots
- Rubber sole
- Shaft measures approximately 12″ from arch
- Boot opening measures approximately 14.5″ around
Safety first is the rule that you should follow when you go hunting and your hunting boots will provide that much-needed safety in the places you go.
Best Rubber Boots 2021 | Utility and Rain Boots
When winter thaws into spring, you can count on terra firma feeling a little less than firm. Mud puddles engulf trails and fields, and even rain-slicked sidewalks can threaten to douse your socks. Now’s the time to arm your dogs with a pair of rubber boots. Some people call them mud, utility, or rain boots, but whatever your preferred name, all pairs share two main elements: high-traction soles to keep you on your feet and impenetrable rubber (or a similar material) to block water. We tested several pairs to find out which will serve you best when you’re out in the garden, doing chores on the farm, or cleaning up a flooded basement.
Read quick reviews of four great picks, then keep scrolling for helpful buying advice and in-depth evaluations of these and other top-performing models.
Bogs Classic Ultra High
Find excellent support and traction in the Classic Ultra.
Trade premium comfort for an incredible deal in the water-tight Chesapeake.
Best Duck Boot
L.L. Bean Boot 8-Inch
This iconic duck boot is at home on city streets or muddier terrain.
Women’s Rain Boot
The women’s-only Jessie is protective, affordable, and versatile.
Protection You Can Count On
In the face of squishy muck, a pair of rubber boots is the armor you need to stay dry and stand tall. Both latex-based natural rubber and its petroleum-based synthetic counterpart are naturally impervious to water. The disadvantage: They don’t let water vapor out the way the breathable membrane booties used in waterproof hiking boots do. So as your foot naturally sweats, that moisture is more or less trapped. A low- or mid-cut boot will be more comfortable in this regard because there is less rubber, but a high-cut option will save you from getting a boot full of mud when you’re wading through deep bogs.
Utilitarian models have a molded one-piece rubber upper that’s bonded to the boot’s midsole and outsole. Heavy-duty options incorporate a flexible neoprene bootie within and extending beyond a rubber shell surrounding the foot. Neoprene was developed in 1930 as the first synthetic rubber, and it acts as insulation and a second barrier against water and oils, appropriate for job sites and other construction and project settings. The added warmth is worth the extra investment if you’ll be wearing your boots in the cold. There’s also the classic duck boot, which is typically lighter and has a rubber and full-grain-leather upper, more suitable if you plan on wearing them primarily for tracking across slushy sidewalks or muddy paths.
Another critical feature is a boot’s tread. You won’t really know how grippy an outsole will be or how well it sheds debris until you’re out in the field, but some basic knowledge can steer you in the right direction. Deeper lugs are better at biting into the ground but could hang on to mud and muck if the lugs aren’t spaced far enough apart. Dirt has less room to get stuck in the shallower nooks and crannies created by shorter lugs, but those won’t provide the same traction benefits. Still, it’s enough to keep you from slipping on slick pavement or uneven terrain.
Finding the Right Fit
Ordering the proper size mud boots can be a particular challenge. Tall slip-on designs tend to have roomy ankles so your foot can get in and out easily, but this can invite blisters as your foot slides within the boot. Choosing a duck boot with traditional laces offers the most customizable fit but requires more time to put on and take off. No matter the height or lacing style, models generally come in only whole sizes. What’s more, some brands default to “unisex” sizes based on men’s feet. For the best fit, find gender-specific shoes and consult a brand’s sizing chart. A good rule of thumb for people in between sizes is to choose the smaller of the two, unless you’ll frequently wear them with thick socks.
How We Tested
After vetting 27 models based on construction, features, style, and cost, we tested several pairs near our eastern Pennsylvania headquarters in early winter. Recent rain showers made for fertile testing grounds during our use testing, but first we started with head-to-head comparisons about weight, waterproofing, and cleanability.
- We weighed each pair on our own scale and reported our findings below on a per-boot basis.
- To confirm they were as waterproof as the manufacturers claim, we submerged the boots in a small pool filled with 3.5 inches of water and potting soil for one hour. When time was up, we checked to see if any sludge managed to get in. That happened with only the L.L. Bean Boot.
- We then hosed down the muck-covered boots to see how easily it was to clean them, should you need to do the same before heading inside. The models that did the best were slip-on designs with moderately aggressive outsoles.
- Finally, our test editors wore them in backyards, on trails, around farms, in creeks, through fields, and on sidewalks to gauge traction and overall comfort. Taken together, these data points assured us each boot is worth the investment, however big or small.
Bogs Classic Ultra High
Weight Per Boot: 1 lb. 13.7 oz. | Upper: Neoprene and rubber | Available Heights: Mid and tall
Classic Ultra High
- Excellent arch support
- Great traction
- Handles help get boot on and off
There’s no shortage of work boots out there, and many are even waterproof. But when your work is happening on a farm or anywhere with a lot of water, you’ll want easy-to-clean, waterproof rubber, not water-resistant leather. We like the Classic Ultra from Bogs. The handles on both sides helped us get the boot on and off easily. We found a comfortable platform in the spongy yet stable midsole and excellent arch support, a rarity within the category. Where other boots slipped on loose grain and hay, the Classic Ultra didn’t falter. The rubber shell didn’t hang on to much dirt and what was left behind rinsed off cleanly. Despite topping out as the heaviest boot in the test, the weight felt less bothersome on our foot. Just be aware: The Classic Ultra runs small. Buy one size up.
Shop Women’s | Shop Men’s
Weight Per Boot: 1 lb. 10.2 oz. | Upper: PVC | Available Heights: Mid
- Reliable protection
- Very affordable
- Not very supportive
- Sizing runs big
You might know Dunlop as a tire maker, but the company name has graced boots for more than 90 years now. Its lineup includes a slew of boots designed for rugged environments, but if all you need is waterproof protection, turn to the uninsulated Chesapeake. The PVC upper has many of the same benefits as rubber, just in a lighter trim. It likely won’t have the same long-term durability, but our new test pair was as impenetrable as the competition. Aggressive lugs create an outsole that handled well along a sandy creek bank and on inclines, despite a few twigs and pebbles occasionally getting stuck. Of course, the major selling point is the boot’s shockingly low price tag—a fraction of even other budget options on the market. It’s an incredible deal, though one that will cost you some level of comfort. There’s no shock-absorbing midsole or rigid heel cup to prevent twisting an ankle. The “unisex” fit wasn’t perfect either; our female tester’s foot slid around inside the boot, though she never experienced any blisters. We recommend men go one size down and women go three sizes down. Ultimately, we don’t think these weaknesses should be deal breakers for everyone. Where it counts most, Dunlop doesn’t disappoint, and that makes the water-tight Chesapeake a reliable pick for warm days or anyone on a tight budget.
Muck Arctic Sport II Mid
Weight Per Boot: 1 lb. 8.8 oz. | Upper: Neoprene and rubber | Available Heights: Mid and tall
Arctic Sport II Mid, $124
- Cozy fleece lining
- Supportive enough for all-day use
- A bit challenging to take off
When we’re gearing up for a cold, wet day outdoors, we reach for Muck’s Arctic Sport. The 5mm-thick neoprene bootie offers much-needed insulation, but we found a standout feature in the fleece lining. This cozy interior could pass for our favorite pair of winter socks were it not for all the rubber. But once we head into a muddy mess, we’re glad for that rubber. Water and mud fall away from the boot easily, even on the lugged outsole, which gripped on a variety of surfaces without issue. (For slick winter conditions, we recommend the similar Arctic Ice instead. Its Vibram Arctic Grip sole has performed exceptionally well on snow and ice.) Another critical feature: the slightly springy EVA midsole. It’s supportive like your favorite sneaker, so full days of use passed by without any fatigue. And we appreciate how easy it was to slide our foot into the wide opening. Getting the Sport off was slightly more challenging and often caused our sock to slip slightly. But on the whole, we found the Sport is equal parts comfort- and performance-oriented, well worth the hefty investment.
Shop Women’s | Shop Men’s
—MOST SECURE FIT—
Dunlop Snugboot Pioneer
Weight Per Boot: 1 lb. 12.6 oz. | Upper: Purotex and Purofort | Available Heights: Tall
- Heel counter locks foot in place
- Hard to get on and off
- Sizing runs big
A rubber boot’s wide opening makes it easy to get on and off, but if you like the security that comes with a close-fitting style, choose the unisex Pioneer. It’s part of Dunlop’s new Snugboot line, and it delivers on that promise. The flexible neoprene-esque Purotex on the upper felt like a thin foam sleeve gently hugging our calf. Meanwhile, the heel counter anchored our foot in place, something no other boot managed to do as well. We appreciated this feature all the more given that the Pioneer runs big. Like the Chesapeake, we suggest ordering one size down for men and three sizes down for women. Dunlop skips rubber in the upper and outsole in favor of its durable polyurethane-based Purofort material. We plowed through mud, slush, and wet grass without a single drop of water getting in or slipping. Given the design, we weren’t surprised that we felt warmer in the Pioneer than other boots. Still, this pricey and slightly heavy pair was one of the most comfortable we’ve tried. Its tight fit ensures the Pioneer won’t get trapped no matter how deep the mud puddle, so you can move ahead freely.
—WOMEN’S RAIN BOOT—
Weight Per Boot: 1 lb. 3.4 oz. | Upper: Synthetic rubber | Available Heights: Mid
- Available in several colors
- Sizing runs small
- Low volume design is a bit cramped
As the temperature rises, the heat-trapping power of neoprene quickly becomes suffocating. Stay dry without overheating in the women’s-only Jessie. Kamik skips out on any insulation and opts for synthetic rubber that’s just as waterproof as the natural stuff yet weighs less and keeps the price tag in check. The relatively thin upper also saves weight. Our test sample measured just south of 1.25 pounds, a considerably low figure for a taller boot like this. We appreciated this lightweight build and the cushy foam insole when our biggest obstacles were large puddles on the sidewalk. The small lugs on the outsole fit this light-duty use, too, but lent more grip than a casual boot would. As for fit, the toe box is tight and narrow, and there’s hardly any room between the insole and the top of the shoe. Our foot felt cramped in the low-volume design, though from a length perspective, we would have been better off sizing up anyway. (We recommend following the European size chart, if you’re familiar with that, as it seems to be more accurate than the U.S. version.) Kamik also doesn’t neglect style; the Jessie has a plain silhouette (a good thing) and comes in more than half a dozen muted or bright colors. Pair your favorite with any spring or summer outfit when rain showers are in the forecast.
—BEST DUCK BOOT—
L. Bean Boot 8-Inch
Weight Per Boot: 1 lb. 3.2 oz. | Upper: Full-grain leather and rubber | Available Heights: Low, mid, and tall
- Classic lacing for precise fit
- More stylish and breathable than most rubber boots
- Takes longer to get on and off
- Sizing runs big
- Leather isn’t as protective as rubber
Perhaps no shoe has more staying power than L. L. Bean’s original duck boot, which the brand first made in 1912. For some, it’s an all-weather wardrobe staple. Others wear it as a fashion statement. Regardless, the iconic half rubber, half full-grain-leather design has the chops to see you through rain puddles or gnarlier turf. Today, the Maine company offers several heights and models, such as a Thinsulate-lined option for cold-weather use. But we like the flexibility of the uninsulated eight-inch boot. Our tester wore a size smaller than her usual and found the boot was still roomy enough to pair with a chunky sock in cold weather. A large majority of mud boots are slip-on, and that makes the regular lacing employed here distinct in a good way. Yes, it takes a bit more time to put them on and take them off, but it’s worth it for a dialed-in fit. The leather on the upper is more breathable than rubber or neoprene, though not as easy to clean and less waterproof. Nearly 1.75 ounces of water seeped into our test pair during the waterproof test. (If you want a truly waterproof option, opt for the Gore-Tex model.) But when you won’t be tromping calf-deep in mud or standing in water for hours at a time, the L.L. Bean Boot is a great blend of protection and style.
Shop Women’s | Shop Men’s
over the knee boots, retro sneakers and shoes with chain
Main trends of the new season.
Not that we were trying to run ahead of the rest of the world and have completely forgotten about summer. No. But the new season is just around the corner, and we are missing something new. Considering the fact that we have spent almost all of this spring and summer locked up, the beginning of a new one is a breath of freshness, hope and a return to normalcy.
Remembering the designers’ shows, which were held in the old fashioned way, in front of hundreds of guests in fashionable capitals, we could not even imagine that the world would turn upside down. We have collected the main trends of the next season, which we are not going to abandon, even in a pandemic.
Boots and boots
This trend will not subside for at least another season.Boots with a gather and a wide bootleg, boots with heels and in western style we wear as part of feminine sets: with a midi skirt, dresses and bermudas.
Perhaps the most practical trend in recent years. Rubber boots and variations on this theme have appeared in the collections of Prada, Versace, Bottega Veneta and many others. A rough tractor sole, a massive round toe and lacing complemented the colored and monochrome boots.
Shoes with chain
The designers decided to make casual shoes a little more elegant, so that every day looks like a holiday. Large and small chains have adorned boots, shoes and sandals at Louis Vuitton, Burberry and Michael Kors.
Sneakers in retro style
Rag and Bone
Sneakers are an indispensable item in any wardrobe, regardless of the season.Now we wear them with dresses and classic pantsuits. For Fall 2020, go for a retro look, with a minimalist design and 80s style.
The rectangular cape has fought with dignity for the place of the main shoe trend for the last couple of seasons, but this fall will give up the palm of the shoe with a pointed one.
Juicy palette of shades
Despite the fact that in the fall we usually tend to dark shades, this season we propose to abandon the usual black and red and opt for bright colors.Who knows how much time we will be free, so every day and out is worth making it memorable.
Photo source: Imax Tree / Legion-Media. ru
Share with your friends and get bonus
Subscribe to the InStyle newsletter.ru
Marksistskaya Street, 34/10, office 403 Moscow, Russia, 109147
Children’s rubber boots for puddles Kidorca
The first thing that caught my eye was the fact that many “help-out products” were invented by mothers. It’s nice, yes, someone is already faced with similar difficulties, someone has already experienced this before us and managed to translate their idea into life, into a life-saving device. Perhaps many of these goods are not essential, and yes, other mothers somehow survived without them, but it’s still so great that someone thought about you a little and gave you such a gift. Nice as hell.
Mothers of many children, willy-nilly, develop super-organization and really do not like unforeseen circumstances because of the “slightly” reduced maneuverability. It is not very convenient to wear changeable clothes, even for two children, every now and then there is a risk that something is underpacked.And in general, this number of things that a mother of many children carries with her, just in case, including food, water, napkins, etc., multiplied by the number of children, can inspire both horror and respect of others.
Thus, you begin to appreciate very much those seemingly insignificant details that at least somehow allow you to keep the situation under control, so that the walk is good, everyone, including mom, can be saturated with energy so that the innocent exit from the house does not turn into into another chaos. In other words, it helped to avoid additional stress, which is already enough in the life of any parent.
And now we were faced with a problem, and the market did not agree to offer a worthy solution in any way.
Yes, we have invested heavily in our own convenience, bought good waterproof clothing. BUT .. she did not save our walks, our feet got wet at cosmic speed, as soon as our kids approached a reservoir, of any depth, and it does not matter that the water is ankle-deep, we run, VERY run, and then we jump, we can still fall and crawl, and stubbornly look at something under water, kneeling in a puddle.Then scooters and balance bikes joined in, splashing in all directions, cheerfully, I admit, everyone and even me. But somewhere in the backyard of my mind, the thought did not leave, is it really impossible to somehow keep our feet dry, but why do we need to risk a week or two spent with a fever and a runny nose every time we walk, I also want to relax while the children are having fun in puddles , I do not want to choose “either – or”. I need a guarantee. Children have fun – feet are dry and warm – no one gets sick – therefore, mom is also having fun.
The search has begun. And what does the market offer us? The most reliable is the swamp, a miniature version of the fishing bog for adults. Not a fountain, frankly. Very rough execution, high prices. This is option number one. Option number two – bog bogs for children, too, are expensive, but we love to experiment, we bought them after all. Wide, they sit cumbersome, the connection of the boots with the fabric, to put it mildly, is not aesthetic. They were too rough, more suitable for out-of-town walks. In the city, such a serious outfit would look out of place.And they take up a lot of space. Carrying them separately and for two children is another bag to the existing one. And it is not possible to walk around the city in such swamps, you cannot even enter a shopping center, the sole is uncomfortable, the overalls are hot, heavy, and bulky.
Involuntarily you begin to think, what would you like, what would suit you for these purposes. After all, we walk often, a daily necessity, and it must be addressed. Note: Yes, it can rain in Vancouver for six months and almost every day.Consciousness itself begins to paint an ideal picture. Everything. The idea was born. And it started spinning. At that time, we had been successfully working in the children’s waterproof clothing industry for several years.
We have set ourselves three tasks, three uncompromising requirements for a new product. The first is natural materials. Natural rubber is, yes, more expensive, but we are talking about children. Second – boots should be stylish, light, bright, how do you want to add color to the dullness of cloudy days. For a long time we chose a fabric, such a variety of waterproof fabrics on the market, and still find the very one, pleasant to the touch, sound both inside and out, membrane, so that it breathes and does not let water through, not dense, so that you can easily wrap it up like a cuff , or completely lower down if necessary. For aesthetics, again. And it must have a special ability to bond with rubber. As it turned out, not every fabric has this property. It was important for us that the attachment point did not leak. How well we know the children’s addiction to measuring the depth of puddles, and why they cannot be content with an average result, why it is imperative to find a place where the depth will be just a little higher than the level of the boot, and solemnly and even with sincere surprise we were repeatedly told: “ Oh, the water is overflowing.“And that’s it, you can start the countdown, cross out all plans (or reduce them to a minimum) and march home, realizing that yes, you can walk with wet feet, but not as much as originally planned. You mentally replay in your head all the efforts spent on getting ready for a walk, and you realize that getting ready took twice as long as the walk itself. Sadness.
The third property, which is also the most important, is to resolve the issue with the ingress of water into the boot. The solution was obvious – lengthen the fabric above the knee and secure it there with a cute drawstring.Yes, there are models of boots with a tightening on the market, but, in fact, this additional fabric is useless, firstly, it is not waterproof, but water-repellent, and secondly, the fabric is sewn with ordinary threads, is not glued tightly and therefore cannot at least somehow- then protect from the flow of water, possibly from light splashes, but they were not initially a problem, so we simply delete this option. And thirdly, the length of the fabric did not help in case of an “accidental” immersion in a deeper puddle, oh, these minions are inquisitive.
And, fourthly, a bonus – can you insulate them a little? But still, it’s not in the summer rain that we are afraid to get our feet wet. All these newfangled inserts, wow, they make boots heavier, kids hunt for running, and even yearlings are still such insecure walkers – stumbles. Comfort at the head, in other words. And a kind of safety, but why additional complications, children and to climb the slides, and on the rungs-stairs must be contrived and resist. As adults, we ourselves prefer footwear to fit comfortably.And it was easy. Naturally, any warm shoes are incomparably heavier than summer slates, but nevertheless we decided to monitor the final weight of the boot so that after all the modifications they could still be called light.
In the end, we succeeded. The presentation model is already perfect. Neat, bright, light and, most importantly, meets the intended functionality. The test drive went off with a bang – the kids did not know what to do with happiness when they were allowed to rush along the backwaters of a mountain river.
Yes, for the full value of the equipment, a waterproof suit is also required, but this good in stores is enough for every taste and budget.We support the TUFFO brand.
In conclusion, I would like to say that we get great pleasure from realizing our own mission, it is quite loudly said, but still the meaning is huge, we would like children to always remain children, so that parents encourage their antics, their unrestrained fun, so that the walk brings a lot of pleasure not only for children, but also for their parents, because it is terribly pleasant to watch your children rejoice. Let all the little material tricks make the work of parents easier, let pots, washing machines and miraculous boots help us.And we will be just loving parents, open and understanding how important it is to give the child freedom, and not only in its broad sense, but also in such trifles as swimming in a cold autumn puddle.
Over the knee boots are an adornment of women’s legs
Yves Saint Laurent introduced boots above the knee into women’s fashion. Among modern fashionistas, questions are often asked about the correct combination of this element of clothing. It is important to respect the border, because a small digression can lead to a depraved appearance that will evoke negative emotions instead of admiration.
Over the knee boots, what are they called?
Modern fashion dictates its own rules. One of the trends is over the knee boots, with which almost every woman is familiar. But not everyone can choose a really stylish look for a given item of clothing, since it does not go well with all things.
Such boots are often chosen by girls with a slender figure and long legs to emphasize their attractiveness. But the fairer sex of short stature can also purchase such a model only with heels in order to visually increase growth.
Treads are boots with a high bootleg. They favorably emphasize the sexuality of the female image. The main thing is to combine it correctly with clothes so as not to look vulgar. For example, a patent leather model with a pointed nose cannot be chosen for a daily look. Let’s take a closer look at the rules for combining boots with clothes and varieties of boots of this type.
Height of boots
When choosing one of the varieties, it is important to consider the length of the bootleg. Girls who prefer casual looks can turn their attention to the height, which slightly covers the knee.Such a model will look stylish, excluding vulgarity.
For more daring looks, fit models that reach mid-thigh length. This option is suitable for creating spectacular boho looks. If a compromise is required, then it is better to choose a model with a shortening bootleg, which can be adjusted in a matter of minutes and can be combined with a business suit.
All varieties are classified according to their purpose, let us consider in more detail the popular ones:
- Demi-season, suitable for light frosts up to five degrees.Their length can be from level above the knee to mid-thigh;
- Winter, made of leather or suede, insulated with fur lining. They can be low-heeled, platform or flat.
The stiletto heel boots are not suitable for winter. The woman will feel discomfort when walking.
- With a free bootleg – this is an original model that does not suit every style of clothing;
- Stocking boots are also gaining popularity among the fairer sex.They are distinguished by their elegance, ideal for the spring;
- Boots-boots! An original creation from the manufacturers, warming up during winter days.
The choice of a particular model depends not only on the height of its owner, but also on the characteristics of the figure, personal preferences and the season when the girl plans to wear them.
It is an important component of boots, as the comfort and convenience of a girl when walking depends on the heel. It comes in several types:
- High – looks perfect with any model from the classic to the most original;
- Low – used in most winter boots;
- Flat sole – the current model for fashion lovers who prefer shoes without heels;
- Wedge heel is a universal type, it will look great on a small foot.
Important! The heel is selected based on its stability.
Manufacturers allow girls to choose from several types of materials:
- Leather is a classic look that is used for the production of various models of over the knee boots;
- Suede, most often used to create boots with a tight-fitting shaft and wedge heel, but there may be other options. Possesses a rich color palette;
- Nubuck is a natural material that requires careful maintenance.Gives the boots elegance and attractiveness;
- Rubber, began to be used for model boots relatively recently. Such shoes are designed for the spring period, maybe with small heels or flat soles.
The variety of materials used allows you to choose a certain style, based on personal needs. A photo of boots will help you quickly figure out the choice of their style.
For whom are tall boots suitable?
When buying such shoes, you need to take into account the features of a woman’s figure.Models will look attractive on slender girls with a proportional figure. Different variations of this item of clothing are suitable for tall girls, but for the fair sex with short legs it is better to choose high-heeled boots. You will need to combine them with tight tights or leggings to visually lengthen the legs. For full ones, you need to select options that do not cut the leg.
High boots: what to wear?
The classic look is perfectly combined with the business style – shirt and pencil skirt, giving elegance to the look.For a casual look, it’s best to wear skinny jeans or leggings.
An evening look will help to create boots of bright color with various decorative elements, in combination with a mini-skirt or dress. The main thing is to make sure that the onion does not turn out to be vulgar. Therefore, the dress is chosen in a simple cut, not tight-fitting.
To understand how to choose the right boots above the knee and subsequently take care of them, I suggest watching the following video:
Treads are stylish footwear that, when combined with clothes, will become a real decoration of women’s feet.
90,000 We solve all problems with rubber boots: cracks, stretching, slipping, painting.
Nothing lasts forever under the moon and rubber shoes, no matter how strong they are, also wear out and deteriorate like any other. But what if you can delay and revive your favorite rubber boots? If they can be glued and restored to their former waterproofness? Or paint and be trendy again in rainy weather? I have collected many different ways that will help extend the life of rubber boots or other rubber products (for example, an inflatable boat), as well as help to eliminate minor problems like a sliding sole.Choose the ones that suit you and be glad that the trip to the store and the waste of money are postponed.
When does it become necessary to stretch rubber boots and can it be done at all?
For example, if you didn’t read my last article about choosing the right rubber boots and bought smaller shoes.
Maybe the shoes were given to you or they came to you “by inheritance” and not of the size that you wear.
May be due to deteriorating leg health (edema, protruding bones).
Rubber boots can be stretched , but not all, but only those made of PVC (polyvinyl chloride). With rubber (they were all like that in Soviet times), such a procedure cannot be done – they are not elastic enough and will simply burst during stretching. PVC, on the other hand, is able to change its shape when heated and then retain it, hardening again when it cools. So if you have exactly rubber ones – just buy a new pair.
Before you start stretching the boots, make sure that they are really made of PVC:
- This should be written on them (usually on the sole).
- Or check it yourself: in an inconspicuous place, apply a hot needle to the material (heat with a lighter). If the “rubber” melts, it is definitely PVC.
Stretching methods for rubber boots (PVC).
Keep in mind that you can stretch 1-2 sizes, no more than . And it strongly depends on the composition of this PVC, how much plasticizer it contains and how much the thin mesh of knitwear on its inner side can stretch.If the boots are more than 2 sizes too small – there is only one way – to the store for a new pair.
The first method of stretching rubber boots.
- Place the boots in the basin and fill them with very hot water . Opinions are different about the temperature of the water: someone writes to pour boiling water at once, someone says that the water needs to be heated to 70-80 degrees. At first I would pour just hot water – about 70 degrees (but not less, otherwise there will be no effect), and after the boot heats up – almost boiling water of 95 degrees, in order to avoid a sharp temperature drop and damage to shoes.
- Let the boots stand for half an hour. If the water cools quickly, add boiling water.
- Put on thick woolen socks (or 2-3 pairs if you need to stretch a lot), pour the water out of the shoes and immediately put on hot damp boots. Be careful not to burn yourself! Also, put on thick cloth gloves beforehand to protect your hands.
- If you need to stretch more, swing back and forth in your boots, rolling your foot from toe to heel and back.
- Wiggle your toes so they have more room later. Walk around with your shoes on until the boots are cool and fit.
- Sometimes it is recommended, immediately after putting on the boot, to stand in a basin (bath) with cold water in order to fix it faster, but remember that high contrasts are not always good and can lead to spoilage!
Life hack! In order not to walk with wet feet, before getting into boots – , put a plastic bag over the toe of the serha.This will keep your feet dry. By the way, you can use the same method if you get caught in the rain in wet shoes.
Pros: Stretching takes place immediately according to the shape of your leg + a health sauna effect for your legs.
Cons: Not everyone likes steaming feet. It is not always possible / time / desire to wear rubber boots, especially wet boots, once again.
Method of the second resuscitation of rubber boots.
Buy shoe braces , they are sold in shoe stores (you can also find them on the internet). The boot is heated over steam for a long time until it becomes soft. You can pour boiling water into the boot and wait for the material to soften. After that, you insert the stretch marks, adjust to your size and leave the boot to cool completely.
Pros: No need to walk in boots, endure fever and discomfort for a while.
Cons: stretch marks need to be bought if they are not available. If you adjust them incorrectly, you may have to repeat the procedure more than once.
Glide gumboots. How to solve a problem?
If your sole still strives to slip into the ditch, then it is too smooth – there is no adhesion to the ice surface.
Or your sole is too hard , at low temperatures it hardens even more, which, firstly, limits the maneuverability and flexibility of the foot to maintain balance, and secondly, forms a film of water between the sole and the ice, due to which a slip occurs. The following methods will help to correct the situation:
Unreliable methods, which are better to abandon immediately or use temporarily when there is nothing else at hand.
- Medical plaster will prevent slipping exactly until it wants to peel off, which can happen literally after a few minutes of walking.Maybe you’re lucky and it will last a little longer. It’s a very affordable option, but is it worth risking your neck?
- Advice was met to rub the sole with potatoes (or starch) . How long do you think it will last on your sole?
Effective methods to improve the soles against slipping.
- Ice shoes with elastic bands.
- Pros: Sold in hardware or shoe stores.A very reliable and practical option, hold firmly and serve for a long time due to metal spikes. They are not expensive, it is quite easy to find in the winter.
For ordinary streets they are not so spiky, do not worry)
Cons: does not always look aesthetically pleasing, you can lose it by accident.
- Felt, linen, flannel or sandpaper.
- A good option is to glue pieces of thick felt onto the soleplate. But this is not always convenient, because it may not be comfortable to walk because of this: the evenness of the sole is disturbed.It takes skill. Flannel or linen in this case will be a good substitute for felt.
As for the sandpaper – it must be on a fabric basis , but even so it wears out rather quickly and its has to be changed often .
- Old nylon tights are melted over a fire and liquid drops are applied to the sole so that they collect into small bumps.
- Sand on the sole will prevent slipping on ice.
- Therefore, it seems to me that the option when glue is applied to the sole of for a moment and immediately sprinkled with sand (which you can buy at a construction site or ask a janitor) will be the best option for solving the problem of slipping in winter. After applying sand , you need to wait days until the glue sets. If the sand will wear off, just repeat this simple procedure.
Sometimes the sole is even specially melted a little in a frying pan or baking sheet, and then put on a sandy surface.Sand is pressed into the outsole for a long-lasting effect. But there is a risk of ruining the boots, here you need to skillfully.
- Screws or metal staples.
- Staples are simple: drive them into the soleplate with the furniture stapler in random order. Let them hit and criss-cross to form a relief on the shoe.
Screws must be shorter than the thickness of the sole . Screw them straight into the sole, with their heads facing the road, trying to spread them evenly over the surface for stability.Put on your boots from time to time and “feel” where else you need to twist so that your foot is comfortable. Ice will no longer be scary to you, but on other surfaces you will clink like a horse , and you can also damage some of them (for example, parquet or tiles) by scratching or even leaving dents. Do not forget that improperly selected screws or poor quality outsole can nullify everything. The sole may crack and then you, instead of solving the problem, will have another additional one.
During the search, we came across tips to screw in screws from the inside of the boot so that sharp metal tips stick out from the sole. But then how to walk, feeling all this metal under the foot? The Princess and the Pea never dreamed of this)
- Do-it-yourself protector using a soldering iron.
- If you have a thick enough smooth sole, you can make any drawing with a regular soldering iron. The deeper and more prominent it turns out, the better and safer it will be on ice.
- Rubber / silicone embossed pads.
- If you do not want to make any manipulations and keep the sole the way the manufacturer intended it – purchase special ribbed lining soles in shoe stores. They can only be worn on ice, the rest of the time they will lie on the shelf in your home. There is also an option to put such pads in a shoe shop, but forever.
Why are rubber boots leaking and how to fix it?
Most often, the reasons for leaking boots are as follows:
- Factory defect, shoes let water through immediately.In this case, return the boots to the store.
- The sole itself may not be of high quality, and you will not immediately understand it. Over time, it dries up and bursts, no matter what you do.
- You pierced / cut through your boot while walking.
- You misuse your shoes, or you often sit in such a way that the sole of the boot is bent too much (squatting.)
- Wearing rubber boots in cold weather. Temperature extremes and reagents sprinkled on roads have a detrimental effect on the strength of the rubber.
How to locate a damaged rubber shoe?
If you step into a puddle and your feet get wet, it’s time to take action. The first thing to do is to find the location of the damage. To do this, fill the basin with water, put the boot in the water so that everything is under the water up to the ankle, and better even a little higher. Then start quickly folding the boot shaft into a roll – the air under pressure will go down and if it comes out through a hole or crack: you will see air bubbles in the water and the place from where they come out.Now completely dry boots , and begin to glue it.
Ways to glue the rubber.
Method one. Glue.
- Select the patch so that it matches the color, texture and, preferably, the thickness.
- Both shoes and patches must be washed and dried thoroughly !
- Sand the surfaces to be bonded so that they are rough , this will bond better. However, if you are gluing the sole, then the surfaces of the material to be glued (the part of the sole at the break point) should be smooth!
- Next, you need to degrease the surfaces .Soak a piece of clean cloth or cotton wool in acetone, vodka, wipe the patch and the area of its sticker well.
- Apply an even, not thick layer of rubber glue to both surfaces and allow to dry completely.
- After that, apply the glue again to the same place, this time thicker, wait until the solvent evaporates from it and it thickens.
- Place the parts to be bonded together and press firmly against . Strength plays an important role here.
- Place a heavy weight on top of and leave to dry.
Which glue to choose for resuscitation of rubber material?
Before deciding on the glue – you need to know exactly what material your “waterproof pads” are from, because each material has its own glue, for rubber – one, for PVC or EVA – another. If in doubt, take the boot with you so that a specialist can help you determine and select the correct adhesive.
Ordinary universal glue of the firm “Moment” , which is sold in any hardware store, it is better not to take for gluing rubber shoes.Reviews about him are not very good: someone takes it, someone does not – there is little hope for him. It will suit you only if you glue this thing and then handle it very carefully, for example, some kind of part from a toy.
But for gluing PVC boots, they use the “Crystal” glue of the Moment company and at the same time the reviews are the most positive: PVC practically fuses and there are no holes).
Look for specialty compounds , they are sold in auto shops and fishing .This glue will hold the patch well and will make the rubber seal again. By the way, you can buy the Bike Tube Repair Kit from the sports shop. There are already patches and decent glue. It’s good that this is a reliable way, it’s bad – the patches are the most common, they will not match in color everywhere and will not look very aesthetically pleasing. For things whose beauty is not primary or if the patch will not be visible – this set is a very good option.
The network praises “nairite shoe” glue , they say that BF-2 (for static bonding) and BF-4 (for elastic bonding) are strong.Often referenced is the glue from Done Deal, called Crazy Pens. It is a transparent and tough adhesive sealant that adheres perfectly and is suitable even for transparent rubber products. Sold in auto shops. Buy one of the above and follow the instructions.
The wonderful glue “Seamgrip” , which is used for repairing rubber boats (look in fishing ones), deserves praise. It is American-made and if you want to glue something inexpensive, like ordinary rubber boots, then it is cheaper to buy new ones, because.because glue costs about the same. But if it is something large or expensive, then this glue will help you out a lot and will glue even the sole of your boots so that it will still serve.
And here is a video of gluing an EVA boot. Everything is detailed and understandable)
The second way to glue the rubber. Curing.
No glue is needed here. Used special rubber , which heats up, melts and sticks at the puncture or cut.This method is more complicated than the previous one, but if everything is done correctly, a significant extension of the service life of the rubber product is ensured.
Vulcanization kits are also available at sports, auto and fishing stores. In addition to scraps of non-vulcanized rubber, there will be small containers of tin and several pieces of combustible composition. A patch is placed on the damaged place, on top – a tin cup with fuel. All this “sandwich” should be firmly and tightly fixed , so that later, when the fuel is set on fire and the tin gets very hot, the rubber tightly clamped underneath it also heats up and begins to melt, sticking to the second rubber surface.
Sometimes a regular iron is used instead of a flammable piece and a metal cup . It is heated to a temperature that is incapable of burning the paper, and placed through it on the patch, which heats up and softens, connecting to the place where the patch is applied.
As for the rubber outsole , when vulcanizing cracks, the treated surfaces must be rough . First of all, the sole needs to be warmed up to about 110-120 degrees, for this you can use the oven .Then, along the perimeter of the sole, while it is still hot, is quickly wrapped with gutta-percha strip approximately 2 cm wide (so that the crack is fixed and does not expand anymore). A piece of film of the required size is superimposed on the sole itself, it must be pressed and smoothed with a piece of dry cloth. Then this whole structure is again heated in the oven to the same temperature for about 7-11 minutes, until the film on the sole melts . After that, the boot is placed with the sole down and is pressed with something heavy for several hours, until the sole cools down and hardens.
Tips for gluing rubber:
- If the hole in the boot is large, place a serpentine net over it to keep the patch tight.
- Wipe off fresh glue immediately before it dries and ruins your neat look.
- If your patch is thin and tends to curl up into a tube, stick an adhesive plaster or a piece of masking tape on it, leaving free pieces around the edges, which you can grab and apply the patch to the desired place.The patch and tape are easy to remove when the rubber is sealed.
How to renew rubber boots with paint?
There are not so many options for rubber products, than it can be painted – the material is rather capricious, because it is smooth and not absorbent. But I still dug up a few practical tips on the forums. Time does not stand still, and a little later, I am sure, they will invent paint, especially for rubber boots, so that women of fashion can change their color 3 times per season for each of the jackets or skirts, but for now we use what we have.So, this is what we have:
Special paints for rubber or plastic. Typically acrylic, decorative. Experiments with them have shown that this is not the best way, because when worn , such paints can peel off and crack, especially, in places of folds, since, apparently, they are not intended for such intensive use. Only suitable if you wear rubber boots neatly and infrequently.
There are paints, specially for car tires for those who tune their cars and want to somehow stand out.You can try them, they are still stronger than decorative ones. They are sold in auto stores, and sometimes they are found in office supplies. There are markers, spray cans, and regular paint cans.
One girl dyed her elastic bands with an aerosol for leather and was very pleased. The main thing here is to apply the paint evenly so that there are no smudges.
Instead of repainting the entire boot, sometimes the small decor is enough to hide, for example, black stripes or dots on light colored rubber.A very good option is permanent CD markers . These markers cannot be washed off with plain water, so they are not afraid of puddles or rain. Find a suitable pattern and decorate the rubber boots with it.
Here is a great example)
By the way, I came across recommendations on the network a couple of times on the network to make a pattern on rubber boots with nail polish . How do you like this turn? I think it should hold up well.At least for a while. Perhaps even enough for the season.
Those who are faced with the marking of rubber products hear about rubber paint for metal KCH-136 , but how it will behave on flexible products is a question. You need to experiment. In such cases, it is recommended that be mixed with rubber adhesive (5: 1) and applied in 2 coats with intermediate drying.
Well, the last method, which is suitable only for light rubber – brilliant green .If your white rubber boots are never white again, go for it! That in general they do not paint only with brilliant green! In one of the articles, for example, I described how to dye Eco-fur with brilliant green or iodine. Now we got to the rubber). True, nowhere is the method of painting rubber with green paint described, but based on previous experience, I would have poured hot water into the basin and, for starters, quite a bit of green paint. The concentration is determined by how much green boots you need, as well as how much greenery your rubber can take. In general, there is only one way – the method of unscientific poke. Who will conduct such an experience – unsubscribe in the comments!
Tips for painting rubber boots.
- Before dyeing shoes, they must be thoroughly washed and dried. Read here how to do it correctly so as not to damage the material.
- In order for the paint to adhere better to a non-porous surface, it must be sanded with fine-grain sandpaper and degreased with any alcohol-containing liquid.
- Before dyeing the boots completely, do a little test on a flexible piece of rubber.
- If you want to restore your rubber boots to their former shine, cover them with asphalt or rubber varnish.