Metal file dividers: Metal File Dividers fits all metal file cabinets and metal drawers. Low prices. Available in four colors

Sturdy metal file cabinet dividers in drawers for Multi-Uses Inspiring Furniture Collections

Check out the massive range of metal file cabinet dividers in drawers at Alibaba.com for efficiently managing and organizing your items while enhancing the interior decor too. This premium range of commercial furniture is not only sturdy and robust but also comes with trendy aesthetic appearances unparalleled to any. These metal file cabinet dividers in drawers are spacious and offer brilliant safety features to keep your items safe. Leading metal file cabinet dividers in drawers suppliers and wholesalers on the site offer these premium products for some of the most competitive prices and discounts for customers. 

The luxurious yet sturdy metal file cabinet dividers in drawers on the site are made of distinct quality robust materials such as aluminum, iron, and other rigid metals that help them last for a long time without compromising on the quality front. These items are not only durable but also sustainable enough to be used in all kinds of spaces and places. These metal file cabinet dividers in drawers are compact in design and can save space for your room, irrespective of where you keep them. The metal file cabinet dividers in drawers on the site are available in various designs such as floor-mounted, knockdown, and many more. 

Alibaba.com features multiple metal file cabinet dividers in drawers available in distinct shapes, sizes, colors, designs and features depending on your requirements and preferences. These products are equipped with all the latest features and traits such as anti-corrosion, anti-rust, anti-abrasive, moisture-proof and can withstand high temperature too. The outer wall, as well as the shelves of these metal file cabinet dividers in drawers, are reinforced and hence, can provide optimum performance to users. These metal file cabinet dividers in drawers also come in with a brilliant locking system to ensure the products stored inside are safe and secure.

Explore the varied metal file cabinet dividers in drawers range at Alibaba.com and buy these products within your budget and requirements. These products are ISO certified and also available as OEM orders when purchased in bulk. You can also opt for complete customization if you want them to look and work the way you want.

File Cabinet Dividers-Storwal, Meridian, Steelcase and more


File cabinet dividers for drawers and shelves- Storwal, Steelcase, Meridian and other mfrs. File dividers keep files seperated and organized in an upright position.

Herman Miller® Meridian File Drawer Divider

Original OEM manufactured part

HON® Shelf Dividers
for 600/700 Series Lateral File Cabinets
15″ D x 7-1/2″ H

HON® 600 Series Open Shelf File Dividers
Steel
Letter / Legal
6-1/2″ x 7-3/4″
Temporarily Unavailable

Steelcase® File Divider
“Old Style” works in all Steelcase File Cabinets

Steelcase® File Divider
“New Style” works in all Steelcase File Cabinets

Steelcase® Box Drawer Divider
(Steelcase® styled 4942)
Fit Conventional™ and Options™ series pedestals
(fixed or mobile).
Manufactured to exact O.E.M. construction specifications.
Size is
12-5/16″W x 3-7/16″H

Storwal® Plate Divider

For 10-1/2″, 12″, 13-1/2″, 15″ & 16-1/2″ drawers or slotted
shelves.
Part# SD76

Storwal® Plate Divider



For 6″, 7-1/2″, & 9″ drawers or slotted
shelves.
Part# SD-76-6/9

Storwal® Plate Divider
For 3″ drawers or slotted
shelves.
Part# SD-76-3

Haworth® File Divider
Fits GF File Cabinets
Original OEM part.
Price: $21.42 ea

GF® File Divider
Fits GF File Cabinets
Original OEM part.
Price: $17.45 ea

Montisa® “Old Style” File Divider
For cabinets mfr. before Jan, 2005

Montisa® “New Style” File Divider
For cabinets mfr. after Jan, 2005

Cole® File Dividers
for 600/700 Series Lateral File Cabinets
15″ D x 7-1/2″ H

Teknion File Dividers

Fits all Teknion, Fileco, Prosource & Global File Cabinets

Teknion File Dividers

Fits all Teknion & Global File Cabinets

Magnetic File Dividers- for any metal surface
Avail: Black, Gray, Beige & White
3-1/2″ high x 4″ wide x 2″ wide base $16.10 ea
4-1/2″ high x 4-1/2″ wide x 2″ wide base $20.25 ea
7-1/2″ high x 9″ wide x 5″ wide base $25.00 ea
3-7/16″ high x 12″ wide x 5″ wide base $35.25 ea
4-7/16″ high x 12″ wide x 5″ wide base $37.45 ea
4-1/2″ high x 16″ wide x 4-1/2″ wide base $35.80 ea
9-9/16″ high x 12″ wide x 5″ wide base $43.25
12-3/8″high x 12″wide x 5″ wide base $48.00

GENERIC Office Home Metal Mesh Desktop Shelf File Dividers Cabinet Document Organizer, Size: 17.5×8.3x13cm,

GENERIC Office Home Metal Mesh Desktop Shelf File Dividers Cabinet Document Organizer, Size: 17.5×8.3x13cm, | ID: 23863993697

Product Specification

Brand GENERIC
Material Stainless Steel
Color Black
Size 17.5×8.3x13cm
Specific Use OFFICE HOME
Usage/Application Desktop organizer
Packaging Type Box

Product Description

  • Holds documents, scratchpads, records, envelopes, address books etc. Convenient for office, school and home use. Great for organizing files, envelopes, mail & bills. Perfect for your office, would look very nice in your desk. Made of metal, relatively strong and durable to use. Help put and classify the file, note books, cards etc.
  • Mesh collection desk accessories have a simple and elegant industrial look and sturdy metal construction. Plus, see-through mesh saves you valuable time when retrieving documents and office essentials. Use in your kitchen cabinets or countertops to organize cutting boards, pizza pans, trays, cookie sheets.
  • Three slots allow you to store an assortment of items you’ll need to easily access in the near future. Handmade 100% black desk file sorter organizer stylishly holds files, papers, letters, binders, folders, looseleaf. Sorts your eye shadow and blush makeup palettes on your vanity, bathroom counter or bureau.
  • Material: Metal, Installation Type: Floor Type, No. Of Tiers: Three-Layer, Type: Storage Baskets, Classification: Non-folding Rack

Interested in this product?Get Latest Price from the seller

Contact Seller


About the Company

Legal Status of FirmSole Proprietorship (Individual)

Nature of BusinessWholesaler

IndiaMART Member SinceOct 2019

GST24AUOPP1804B1ZZ

Back to Top

1

Have a requirement?
Get Best Price

1

Have a requirement?
Get Best Price

Safco Drawer Dividers – Pack of 20 4980

Safco Flat File Drawer Dividers – Pack of 20


Model Number:

4980

Customize and organize your file drawers. Drawer dividers for 5-Drawer Flat Files provide easy separation of materials. Dividers are self-sticking black 11 plastic sections that can easily be cut to accommodate your needs.

Features:

  • For Five Drawer Flat Files
  • 11″ plastic sections can easily be cut
  • Self-stick back
  • 20 sections per carton

Product Dimensions:

  • Outside Dimensions: 11″W x 1″D x 1 1/2″H
  • Product Weight: 0.1 lbs.

Assembly Instructions

Safco Flat File Drawer Dividers – Pack of 20


Finished Product Dimensions:
11″W x 1″D x 1 1/2″H
Finished Product Weight:
0.1 lbs.
Material:
Plastic
Assembly Required:
No
Ships Via:
UPS / Fedex Ground

Limited Lifetime Warranty


OUR warranty is a way of pledging excellence in the quality of our products. It is a way of protecting our customers investments and continuing product improvement. Mostly, our warranty is a way ofextending our dedication to our customers.

Safco warranty obligation: We pledge to repair or replace, at Safco’s option, any Safco product or component that is defective in material or workmanship for as long as you, the original purchaser, ownit. This warranty is subject to the provisions HERE.

To register your SAFCO product CLICK HERE

Safco Flat File Drawer Dividers – Pack of 20


Purchase Beautiful dividers for filing cabinet Online Customization Products

You can get a wide range of dividers for filing cabinet at Alibaba.com. They come in original materials and fabrics and are very useful for giving your space a more organized appearance. People use dividers for filing cabinet to provide them with privacy, for decoration, or to organize a large room. These dividers for filing cabinet are temporary and you can remove or reinstall them according to your preference with ease. 

dividers for filing cabinet are useful in dividing a room into separate areas. Building partitions consume a lot of time and can even destroy a room’s appearance if not done correctly. The wide range of dividers for filing cabinet offer stylish partitions, making work easier. Now with a variety of dividers for filing cabinet from trusted suppliers and manufacturers, separating large rooms is very easy. They serve their purpose and look amazing at the same time.

The dividers for filing cabinet from Alibaba.com come in different colors and fabrics that easily blend in with your room. They have different purposes and are ideal for whether you are moving in a dorm, starting a business, for professional office use or even for blocking your machines from the sun. dividers for filing cabinet come in varied height and width options, giving you enough privacy. They have an ideal thickness that does not take up much of your floor plan. dividers for filing cabinet come in easy installation steps, making it easy for any user to install. They have panels and you can even fold them when you want to use the whole room space without separation. 

To make your space beautiful with these stylish products, visit Alibaba.com for great deals. You will find dividers for filing cabinet options at amazing offers with a variety of verified suppliers and manufacturers.

Rev-A-Shelf, Hafele, Knape & Vogt, Omega National Products Drawer Inserts and Organizers at Cabinet Accessories Unlimited

Hafele

With Hafele’s collection of Drawer Inserts reduce the mess and get organized with inserts for cutlery, plates, spice, and more.

Rev A Shelf

Rev-a-Shelf offers a complete collection of drawer tray kits for the storage of cutlery, bread, fruits, spices and more.

Omega National

Keep your drawer organized with Omega National Products wood drawer inserts for all types of cutlery and flatware.

Knape & Vogt

Organize your drawers with these drawer inserts for your vanity drawers, cutlery drawers, flatware drawers, the “junk drawer” or just about any other drawer.

Federal Brace

Made in America, Federal Brace’s line of steel brackets includes a style for every installation, hidden to decorative, offering only the strongest support.

Hardware Resources

High-quality organizers for kitchen and bedroom areas in your home to help keep them clutter-free.

Lazy Daisy by Rev-A-Shelf

These drawer inserts are available in two different widths for narrow and wide drawers. Made from birch wood.

Rolling Shelves

Rolling Shelves products makes it easy to reach everything in your cabinets without reaching or straining.

Custom Inserts

Custom Inserts – Beautiful, Affordable, Custom Drawer Inserts Made to Your Dimensions.

Blomus

Blomus – Pure Life. Beautiful, Modern Kitchen & Home Accessories Made from Stainless Steel and Other Materials; Imported Directly from Germany

Vauth-Sagel

Vauth Sagel is an expert on kitchen organization, offering a large selection of ingenious cabinet pull-outs and lazy susans. They combine design innovation, the latest technology, and fine craftsmanship to produce the highest quality drawerslides available.

CCF Industries

Implementing the highest quality of materials and craftsmanship has allowed CCF Industries to grow into a leading manufacturer of custom, quality drawer boxes, since 1995. CCF Industries dedication to meeting your needs ensures youll receive a quality product, complete to your specifications and on time.

Metal furniture Unitex. Mobile rack Optim

Mobile metal shelves are designed for storing documents and books in archives, libraries and offices. Their goal is to save space and increase the volume of storage units from 40 to 85% by reducing the number of working aisles between the shelves.

Allows to fill the entire area of ​​the room, where there is only one passage. Access to the desired book or folder can be effortlessly moving the shelves using a mechanical drive.

Mobile (mobile) racks consist of two main structural units: mobile base and superstructure.

Assembly diagram

Movable (mobile) base on the track

The base is an all-welded frame with roller units installed in it, allowing the rack to move along special rails. The drive to the rollers is made in the form of a chain drive driven by a hand wheel.The design of the base and drive elements are optimized in order to obtain maximum structural rigidity with low metal consumption. At the same time, the necessary smoothness and stability of the movement of the base on the rails are provided.

A distinctive feature of the mechanism is the use of a special stopper, which was developed as a result of generalizing the experience of real operation of mobile bases. The stopper provides guaranteed safety when working with mobile bases and has earned high praise from the staff of archives and libraries.

rail tracks are made of special rolled stock and equipped with an aluminum ramp (slope). The design of the tracks provides for the possibility of cleaning them from the ingress of debris and ensures the smooth movement of various equipment used in the archives through the tracks.

Superstructure

The standard set of the rack includes:

  • Side panel
  • Shelf
  • Clip
  • Ramp
  • Floor fixing
  • Coupler
  • Tie fastening

Additional options:

  • Decorative panel
  • Raised floor
  • Solid back wall
  • Rear restraining net
  • Rear limiter
  • Front stop
  • Divider for shelves
  • Registrar
  • Numbering

The rack consists of solid side panels, which makes it ideal for storing books, magazines, archive folders.The shelves of the rack are mounted on clips, which makes it easy to change the inter-shelf distance for the desired document size.

Mobile shelves can be either single-sided or double-sided. The second option is preferable, if the customer wishes, to maximize the loading factor per unit of usable area. In this case, the storage system turns into a solid closed cube, in which the end section is equipped with a closed wall and a lock. This is extremely important if you want to enforce access restriction.

The range of accessories for the “Optim” rack is in no way inferior to any foreign analogue. Optional accessories include solid book dividers, wire book dividers, rear stopper, front stopper, pull-out shelf, solid back wall, decorative panels.

TAKE IN! Let’s give paper file separators (aka Tab Inserts), St. Petersburg center

November 12th, 2013


georgia_gilmour 11:30 – CHECKED! We will give away paper file dividers (aka Tab Inserts), center of St. Petersburg
We will give away (and we will be very happy to do it!) Paper file dividers for metal cabinets with drawers.Dividers are a whole bag, different colors, different states. An example is here http://s7d5.scene7.com/is/image/Staples/s0434560_sc7?$splssku$. In addition, we will give transparent files (also a lot). Self-pickup, the center of St. Petersburg, next to the Red Bridge. Help clean up the office! Write in comments or in a personal.

Tell me the address more precisely, and the time when you can drive up.

emb.58 Moika rivers, business center Mariinsky, entrance with a passport, go up to the 4th floor, office 401. You can pick it up even today, before 18! If anything, call us – 320 79 81

Natalya, they just called us, they said they were going to pick up. Sorry, we give it to the first one!

Good night! What else do you give from the office?

Hello! As soon as we decide to “take out” something, we’ll post it right away!

LiveJournal.com

Hanging files, document dividers
Products and services of the company “Ayler”

Sorting:
in order
by price increase by price reduction by novelty

as a gallery

as a list

In stockWholesale and retail

Code: S

In stockWholesale and retail

Code: S

In stockWholesale and retail

Code: S

In stockWholesale and retail

Code: S

In stockWholesale and retail

Code: S

In stockWholesale and retail

Code: S

In stockWholesale and retail

Code: S100164

In stockWholesale and retail

Code: S15264

In stockWholesale and retail

Code: S2512

In stockWholesale and retail

Code: S100194

In stockWholesale and retail

Code: S2912

In stockWholesale and retail

Code: S1339

In stockWholesale and retail

Code: F022705

products per page:
16
243248

90,000 5.1.1. Spacers and separators Constructions

Ancillary devices, often referred to as fittings, are:

  • dividers;
  • branches and coolers;
  • taps and valves;
  • adapters, gaskets, etc.,

which are necessary for the installation of pressure gauges in order to ensure the subsequent correct measurement and control of pressure values ​​with a strictly regulated error, as well as to ensure the reliability of the operation of these devices.

5.1. Separators and Separators

Seals, often called seals, are designed to separate the measuring device, the inner cavity of its sensitive element from the measured medium and are used in the following cases / 5-1 /:

  • contamination of the measured substance or its high viscosity; crystallizability or rapid changeability of its plasticity;
  • if the measured medium causes corrosion of the sensitive element or other parts of the instrument of the internal measuring cavity;
  • high temperatures of the measured media, which do not allow the operation of standard measuring instruments;
  • increased hygiene requirements for technological processes in food, pharmaceutical, etc.industry, as well as increased requirements for the control of processes in conditions of chemical reactions;
  • Ensuring the operability of devices at low ambient temperatures, the internal cavities of which are filled with a liquid, easily frozen medium;
  • design features of the equipment that do not allow the installation of standard meters.

Indicating and electrocontact manometers and other pressure measurement and control devices can be completed with separators.

Section 2.4 describes pressure gauges in which diaphragms are both a separating element and a sensitive element. Such designs, with the advantages described above, have disadvantages in comparison with the use of a measuring device with separators: limited measurement range (up to 4 MPa).

The main requirements that must be followed when choosing a separator are as follows:

    • The material of the diaphragm and the supply lines of the separator must not interact with the measured medium;
    • the rigidity of the separating element (diaphragm, bellows) should correlate with the measured pressure and the characteristics of the SE of the device: the rigidity of the diaphragm of the separator should be much less than the stiffness of the sensitive element of the measuring device;
    • the volume of liquid displaced from the separator in a given pressure measurement range should be related to the change in the volume of the sensitive device;
    • , the conditions of installation and separator, with the exception of special designs, must exclude the presence of air or gas in the internal measuring cavity of the device and in the internal working volume of this separator.

The operating range of diaphragm and bellows seals of various models in terms of pressure is from minus 0.1 to 160 MPa, in terms of temperature – from minus 90 to + 400 ° C.

In terms of functionality, the separators are designed to work with all aggressive media found in modern technological processes.

a) Constructions

Diaphragms or bellows are used as working elements of the seals, which can be removable or mounted on device bodies by welding or soldering.

Bellows are more elastic, with the possibility of displacing a larger volume of the separating liquid (relevant for significant changes in the internal volume of the SE measuring device). However, the shape of their surface, the specificity of the designs of separators with bellows (the presence of various shapes of sinuses) limit their use for viscous media that change the phase state.

Diaphragms are very sensitive to overloads and, accordingly, exceeding the maximum permissible loads, which can be observed if the connection between the separator and the measuring device is not tight, the device is not well filled (air residues), exceeding the calculated impact values ​​can lead to irreversible deformations and the device leaving building.

All separators designed to separate the internal cavities of the sensitive elements of the devices from the measured medium can be divided into open and closed, the main distinguishing feature of which is the accessibility of supplying the measured medium to the separating element. With open separators, the separating element is in direct contact with the volume of the measured medium or the cross-section of the supply lines is not less than the area of ​​this element. In closed dividers, the supply of the measured medium, as a rule, is carried out through supply lines with a cross-section significantly smaller than the area of ​​the separating element.

Closed separators are fundamentally different from open ones in the presence of a medium supply chamber with a connecting nipple. In most designs, open dividers equipped with a media supply system are converted into closed ones. Also closed, in which the medium supply is replaced by a connection device directly to the tank or pipeline flange, are converted into open ones.

A number of seals, such as small diaphragm seals (PMM), are classified as open or closed, depending on the place of installation: installation in the manometer connecting nipple acquires signs of closed; screwing the PMM directly into the tank, flush with its inner wall, characterizes it as open with a suitable range of applications. Open dividers are divided into technical and hygienic. Technical seals are usually flanged. Hygienic dividers are connected to technological lines using special designs. Open seals are most widely used in pressure measuring systems for viscous, solidifying, interspersed, contaminated media.

Diaphragm seal flanged open ( RMFO ) (Fig.5.1), one of the most famous, has several modifications: all-flange (Figure 5.1a) and with a pressure flange (Figure 5.1b).

In the RMFO seals shown in Fig. 5.1, the diaphragm 1 is connected to the one-piece flange of the separator 2 or the body of the diaphragm block 3 by welding, soldering or special glue, which is determined by the properties of the measured medium. In the presented designs, the one-piece flange of the separator 1 and the body of the diaphragm block 3 are manufactured in one piece with the outlet connection of the device.

Fig. 5.1. Schemes of all-flange separators RMFO (a) and with a clamping flange (b), type of RFMO separator all-flange: 1 – membrane; 2 – flange; 3 – membrane block body; 4 – a sealing gasket; 5 – clamping flange; 6 – fastening bolt; 7 – filling unit.

In the all-flange design (Figure 5.1a), the separator is installed on a standard pipe outlet flange.

For the installation of an RMFO with a clamping flange, Fig. 5.1b), a special seat is required for installing a membrane unit 1, the tightness of the installation of which is ensured by a clamping flange 5 with a sealing gasket 4 and fastening bolts 6.

The filling unit 7 takes place in all structures where the separating element is made of metal and its movement is limited by the design geometry. Differences in the mounting designs of all-flange and pressure-flange dividers are not significant during a new installation, because such dividers can be supplied with mating, both serial and individual flanges. Pay attention to the design when installing into an existing spacer slot.

RMFO (Fig.5.1) allow to measure the pressure of crystallizing and changing their phase state of media, liquids, gases and gas-liquid mixtures with solid impregnations, high-viscosity substances. The measured pressure, as can be seen from the figure, acts on and bends the seal diaphragm. By means of the working fluid, the pressure is thus transferred to the sensitive element of the device. The change (displacement) of the volume of the separating liquid when the working pressure is applied to the membrane or bellows is determined by the dimensions and properties of the membrane, the design of the device.

By design, open bellows flange separators (RSFO) are close to the RMFO, a diagram of one of which is shown in Fig. 5.2.

Figure 5.2. Diagram of a bellows flanged open RSFO separator: 1 – bellows; 2 – flange; 3 – connecting nipple.

Bellows 1, made of fluoroplastic in this design, is fastened with a clamp between flange 2 and connecting nipple 3. Siphon 1 is mounted flush with the connecting plane of flange 2 or, if additional protection is required, it is recessed inside this flange.

Usually, seals with an open diaphragm or bellows are installed on large-diameter pipelines, various kinds of vessels, reservoirs, when organizing various technologies when the presence of stagnant zones is not allowed, etc.

Separators RMFO and RFFO with an all-flange design or with a clamping flange can be mounted on large-diameter pipelines. As an example, Figure 5.3 shows a diagram of a workplace for mounting such a separator on a large-diameter pipeline.

Figure 5.3. Scheme of a workplace for installing a separator with an open membrane on a large-diameter pipeline: 1 – pipeline; 2 – branch pipe: 3 – flange for connecting the separator.

On a large-diameter pipeline 1, a branch pipe 2 is mounted by welding, at the end of which a flange 3 is installed, which has a standard or individual configuration. The length of the branch pipe 2 is determined by the physical properties of the working medium: the higher its viscosity, the tendency to solidification, the shorter the length of the branch pipe.This is the dependence on the requirements of hygiene: the washability of stagnant zones is higher with a shorter length of the diverting elements. In such structures, the membrane is located practically in the zone of the moving stream.

In some technologies, a stagnant zone may occur in front of the flange separator, where the measured medium accumulates and forms a stagnant zone. For periodic maintenance in situations where an additional check of the working surface of open separators is required (possible adhesion of the working medium to the diaphragm, filling and solidification of the medium in the supply channel, etc.)), service insert 1 (Fig.5.4) is used, mounted between the supply line with flange 2 and separator 3.

Fig. 5.4. Installation diagram of the service insert of the separator: 1 – service insert; 2 – supply pipeline with flange; 3 – separator; 4 – mounting bolts.

The service insert is installed in the corresponding seats of the flanges and is fixed by tightening the tensioning bolts 4. The presence of working holes (usually two holes) with plugs in the service insert allows maintenance of the separator.

When positioning the seal diaphragm in the measured flow, the physical properties of the flow must be taken into account. So, in the presence of solid inclusions, the membrane can undergo increased erosive wear with a corresponding reduction in its service life.

To increase the service life of membranes in conditions of increased erosive wear, as a rule, one of the solutions is used: a membrane is made of a special material that is resistant to work under these conditions (see.below about materials for membranes), or seek design solutions.

So, protective sides can serve as constructive additional protection of the membrane from direct mechanical influences in open dividers. As an example in fig. 5.5 shows a diagram of a collapsible flange separator with a pressure flange. In this design, the diaphragm 1 is mounted on the connecting nipple 2 by means of a ring with a protective flange 3 and sealed with a gasket 4. The clamping flange 5 allows the structure to be sealed at the installation site.In this design, a ring with a protective flange 3 provides a certain protection of the membrane 1 from lateral mechanical influences.

Figure 5.5. Diagram of a separator membrane flange collapsible open with a protective flange: 1 – membrane; 2 – connecting fitting; 3 – a ring with a protective board; 4 – gasket; 5 – clamping flange.

For operation in conditions of increased erosive wear, diaphragm seals with a deep-seated diaphragm have been developed (Fig.5.6) – RMFU.

Figure 5.6. View of a non-separable RMFU separator with a deep-seated membrane (a) and assembled with an MP100 manometer.

In the non-separable separator shown in Fig. 5.6, a flow stabilization chamber is provided in front of the diaphragm, formed by the narrowed medium inlet opening, the diaphragm and the distance between them. Such a chamber significantly reduces the dynamic effect of the measured medium directly on this membrane and makes it possible to increase its service life.

In Figure 5.7. shows the diagrams of separators for flanged collapsible open diaphragms (a) and bellows (b), in which the branch pipe of the supply channel serves as a stabilization chamber for the measured medium and significantly reduces the side mechanical effect on the diaphragm or bellows.

Figure 5.7. Diagrams of separators, collapsible, open with in-depth arrangement of the membrane (a) and the bellows (b): 1 – membrane; 2 – connecting flange; 3 – outlet fitting; 4 – bellows.

In the collapsible structures shown in Figure 5.7, the membrane 1 or bellows 4 is fixed between the connecting flange 2 and the outlet fitting 3. The membrane 1 and bellows 4 can be either metal or made of elastic materials: fluoroplastic, rubber of various brands. When using separating elements made of elastic materials, vacuuming to fill the separator-internal cavity of the SE of the measuring device is not necessary.

A slightly different situation may occur when using separators in the system for measuring the level of various substances in vessels-tanks using the hydrostatic method.As an example, Figure 5.8a shows a schematic diagram of the installation site for a differential pressure gauge. In many cases, various kinds of sediments are concentrated at the bottom of the tank, which leads to clogging of the measuring path of the device.

Figure 5.8. View of the installation site (a), diagram (b) and view (c) of a separator with a tube (RMFT): 1 – vessel; 2 – branch pipe; 3 – flange.

With the installation of a separator, the influence of clogging on the measurement result is reduced.However, if there is significant bottom sediment, the branch pipe 2 can also become clogged, which prevents a representative signal from being obtained by the pressure value. In order to reduce this effect, separators have been developed, which are a type of open diaphragm devices, with a tube

(Figure 5.8b, c) – RMFT. In such devices, the tube is mounted in the branch pipe so that the membrane is flush with the inner wall of the tank. This greatly reduces the likelihood of the influence of bottom sediments on the measurement result and ensures the reliability of the readout.

Hygienic (food) separators are designed to measure and control pressure complete with pressure gauges in technological lines, where there are increased requirements for their cleanliness, the possibility of periodic flushing, preventing the formation of stagnant zones. The most widely used hygienic separators are in the food industry, pharmaceuticals, chemical technologies, biotechnology.

Hygienic separators can be subdivided according to the method of connection to the process pipeline into: threaded, with a clamping nut, triclamp, with a clamp of various kinds of platforms (for homogenizers).

A threaded hygienic diaphragm seal with an external thread (Fig.5.9a) is screwed into a special socket with a mating internal thread and is sealed with a gasket along the lower edge of the device.

Diaphragm hygienic seals with a clamping nut (Fig.5.9b, c) can be sealed along the cone of its body. The mating seat must also have a reverse cone or the form of a cylinder with an external thread, along the upper generatrix of which a seal is made.The sealing force is provided by the corresponding compression nut.

Fig. 5.9. Diaphragm hygienic seals: a – with external thread; b, c – with clamping nut

Triclamp (tri clamp fitting – from eng. ) The spacers, which have been actively used in recent years, are intended for hygiene applications. The low working pressure of separators with such a connection (up to 2.5 MPa) compared to flanged ones is compensated by the possibility of quick assembly – disassembly of the installation site (Fig.5.10).

Figure 5.10. Type of separator triclamp (a) and its components (b): 1 – membrane block; 2 – supply unit; 3 – clamp connector.

Sealing in triclamp separators is carried out using an elastic gasket mounted between the diaphragm block 1 and the supply unit 2. The material for it is determined by the properties of the measured medium. The diameter of the supply unit is up to 150 mm.

In the food industry, or rather in homogenizers, small-sized finger dividers are used (Fig.5.11).

Fig. 5.11. Scheme (a) and a view with a pressure plate (b) of a membrane separator for homogenizers (RMG): 1 – body; 2 – membrane; 3 – valve for filling the working fluid.

Diaphragm seals for homogenizers (RMG) are designed for devices where high hygiene requirements and limited space for connecting measuring devices. RMG are installed in a socket, manufactured in a technological case, and are fixed with a clamping platform with bolts.The shape of the pressure pads can be different.

The small dimensions of the membrane suggest the operability of such devices at high pressures (25 MPa and higher).

Compact diaphragm seals (PMM) are compact. In spacers of the adapter type (Fig. 5.12), the body is made in the form of an adapter, to the bottom of which the membrane is welded. In the middle part of the body there is a valve for filling the separator and the device with working fluid.Depending on the seating thread of the seal, the diaphragm diameter can be from 15 to 50 mm. The special material of the separating diaphragm (with its small size – about 13 mm) allows the use of such devices on abrasive media.

Figure 5.12. Scheme (a) and view (b) of a small-sized diaphragm separator (RMM): 1 – body; 2 – membrane; 3 – valve for filling the working fluid

Small-sized stainless steel seals can be used for operation at ultra-high pressures (up to 60 MPa and above).

The main disadvantage of small-sized dividers is the need for careful selection of measuring devices. The small diameter of the separating membrane provides for its slight deflection in the range of operating pressures and, accordingly, a small change in the volume of the medium in the space above the membrane, which requires the use of measuring instruments also with a small volume of the inner cavity of the sensitive element. This design of the device can cause measurement errors in some pressure ranges.

Closed dividers differ in the dimensions typical of the device connections. The main application is the separation of the inner cavity of the measuring device from the measured medium, which is characterized by aggressiveness, low freezing point, the presence of unacceptable compounds (oils in oxygen technologies), etc.

Diaphragm seal flanged closed collapsible ( RMFZ-R ) in a prefabricated structure (Fig. 5.13a, b) has a diaphragm 1 fixed between the base with the inlet nozzle 2 and the body with the outlet nozzle 3 with a gasket 4 with fastening bolts 5. seating nests of pressure gauges. The design of the separator with a closed diaphragm as a prefabricated unit on bolted connections allows for servicing directly the diaphragm and the inlet nozzle – the base with the inlet nozzle.In such a design, it is possible to replace the main working element – the membrane.

Figure 5.13. Scheme (a) and view (b) of a closed diaphragm flange separator (RMFZ): 1 – membrane; 2 – base with an inlet fitting; 3 – body with outlet fitting; 4 – gasket; 5 – mounting bolts.

The small size of the bore of the nozzle determines the difficulty of using this type of separator (with a closed diaphragm) for viscous, solidifying – changing its phase state due to temperature or time, crystallizing media.

The diaphragm in flanged closed dividers is made of various steel grades, various rubbers, thin synthetic films.

Reducing the size and metal consumption can be achieved by replacing the flanges with a threaded body connection, as shown in Figure 5.14.

Figure 5.14. Schemes and type of separators, collapsible, closed with a membrane (a, b) and a bellows (c): 1 – membrane; 2 – supply pipe; 3 – outlet branch pipe; 4 – gasket; 5 – bellows.

In the separator shown in fig.5.14a, the diaphragm 1 is fixed between the inlet 2 and the outlet 3, where the tightness is ensured by the gasket 4. The separating element can be different, as, for example, in Figure 5.14b, where the bellows is used 5. In an economical version of the diaphragm flange sealed welded (RMFZ C) (Figure 5.15) membrane 1, installed between the outlet 2 and the inlet 3 nozzles, is connected with one welded joint, which ensures the integrity of the structure and the operability of the structure up to 40 MPa.

Figure 5.15. Scheme (a) and view (b) of diaphragm seals RMFZ C in welded design with turning and additional protective coating.

The design of the welded version of the RMFZ provides an opening with a locking screw for filling with liquid. The rest of the parts are motionlessly connected to each other. A distinctive feature of such separator designs is their low price.

Small-sized bellows separators (PCM) function, respectively, on the basis of bellows (Fig.5.16). The advantage of this type of device lies in the relatively long stroke of the bellows, its good elastic characteristics and, accordingly, the possibility of a significant reduction in the effect of the separator operation on the accuracy of the manometer readings. High elasticity allows the use of such separators at low pressures. In addition, the bellows allows the separator to be completed with devices in which the volume of the internal space varies significantly with a change in pressure.

Fig.5.16. View of the small-sized bellows separator RSM (a) and its components: b – bellows block; c – base.

A similar design of the separator is known, in which the bellows is made of fluoroplastic. A feature of such a separator is not high demands on the quality of filling: residual air in the internal volume is allowed.

One of the main problems in industrial environments is ensuring the tightness of the connection between the separator and the meter.Very often, the lack of professionalism of the service personnel leads to a breach of the tightness of this connection. Thus, it is not allowed to use gaskets, mounted between the separator and the devices, made of soft heat-shrinkable material. For example, Teflon, when exposure to high temperatures leads to a subsequent change in the geometry of the product. It is also important to use a material for the manufacture of gaskets, which retains its technical characteristics over time.

Often, the use of gaskets made of a relatively soft material leads to a breach of the tightness of the inner cavity of the measuring device and the separator and in most cases is the cause of irreversible deformation of the separating element (membrane, bellows) and failure of the auxiliary device.

All-welded separators with pressure gauge are designed to exclude unauthorized violation of the tightness of the connection between the separator and the measuring device. In some cases, when dismantling the device-separator system from the installation site, as well as during unprofessional maintenance of this system, there are violations of the tightness of the threaded connection between the separator and the device. Such violations lead to fluid leakage from the internal cavity, the appearance of air inclusions in it and, ultimately, irreversible disruptions to the separator’s performance and, often, the device.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *