Lamination sizes: Chart Size Laminating Pouches | Laminator.com

How do I choose the right Laminating Pouch?

Pouch laminators are really popular because they can help you produce quality laminated documents within a few minutes. To successfully use one of these devices, you need to have some laminating pouches in your office supply cabinet. But you don’t just need any pouches: you need ones that are right for your needs. To find the right ones, make sure you keep the following in mind:

1.)    Size and thicknesses. You’re going to need pouches that are just the right size for your materials. Luckily, a variety of different sizes are available: small, medium, large, and every size in between. When selecting your pouch, make sure it’s large enough to give you about a 1/2-inch border around the document. This ensures that it will be properly laminated. You also need to choose supplies that are the right thickness so that they’ll be compatible with your laminator.  Laminating pouches range in thickness from 1.5 to 10 mil and not every machine can work with all thicknesses. The thicker supplies will give your document more protection (which is important if they’ll be handled a lot), so be sure to choose accordingly.

2.)    Finish. A lot of the pouches that you can currently buy are glossy. They help your documents and photographs look great, and are smooth to the touch. (They can also help the colors in your materials stand out.) However, documents laminated with glossy film can be difficult to read in certain situations because of glare. If that’s an issue for you, matte pouches are a good alternative. You can also write on these supplies which can be very convenient. And if you want to give your work a different look, there are some that have colored backs as well as ones with a sticky back so you can make adhesive documents. Be sure to take a look all of the available supplies to see what’s out there.

3.)    Brand name and quality. Laminating pouches are manufactured by a lot of different companies and, as you would expect, quality varies greatly. As a general rule, you should avoid the “no name” products and look for ones made by companies such as GBC. Using higher-quality pouches might be cost a bit more, but your documents will look better and you won’t experience as many problems as you would when using “no name” supplies.

In a nutshell, those are the things you be looking for and thinking about when selecting your laminating pouches. You’ll want to choose ones that are the right size and thickness. (The thickness is especially important. Consult the machine’s instruction manual to see what the device can handle.) Also, finish is important because it can affect the readability of your document. (Chances are you want people to read your work, right?) And, depending on the finish, you can make stickers and more. Finally, high-quality supplies are best even if they’re a bit pricey. Shop for your laminating pouches today and get some for your office supply collection.

Laminating Pouch Film Buying Guide

Laminating pouch films are pre-cut sealable plastic sheets used as consumables in the pouch laminating process.  Pouch film comes in many different shapes and sizes and selecting the right pouch film will depend on your application and preference.  Couple of features to consider when purchasing pouch film are:

Mil Thickness
Heat Sealed or Pressure Sensitive (also known as cold laminating)
Sizes

 

Mil Thickness

Laminating pouch film thickness is measured in thousands of an inch, referred to as mil.  The higher the mil, the thicker and more rigid the laminating will turn out.  Pouch films generally come in 1.5 mil, 3 mil, 4 mil, 5 mil, 7 mil, and 10 mil.  Thicker laminating pouch films, such as 7 mil and 10 mil,  will often be very stiff and sturdy.  5 mil and under pouch films will be more flexible and thin. Selecting a pouch film thickness depends on the preference of the user for a particular laminating project.  If you want a thick, sturdy, and non-flexible lamination, then go for higher end mil thicknesses.

 If you want thin, flexible lamination, then go for lower mil thicknesses.

Heat Sealed or Pressures Sensitive (Cold Pouch Film)

Laminating pouch film come in two types of temperature application settings, heat sealed wich requires the glue in the pouch film to be heated in order to be sealed, and pressure sensitive which requires no heat.  Heat sealed or thermal pouch films are the most common laminating pouch films.  Thermal pouch films require the use of a pouch laminator. Pressure sensitive pouch film, also known as cold pouch film or self sealing pouch film, do not require a pouch laminator in order to seal a document.  Cold pouch films are self-adhesive and will stick to a document on its own.  However, it is a good idea to run cold pouch film through a pouch laminators (on cold setting) because it will help to roll out any wrinkles or bubbles.

Sizes

Laminating pouch film come in many different shapes and sizes.  Pouch film product descriptions will most often have dimension measurements and the document application size it is suited for.

 Letter size or copy paper size, 8″ by 11″, pouch films are generally the most popular pouch film. Pouch films also come in menu size, legal size, photo sizes, ID sizes, and wallet size document sizes.  Selecting the appropriate pouch filmsize for your laminating needs will ensure that your document will be completely sealed and protected.  Choosing an oversized laminating pouch film will mean you will have to trim off any excess pouch film.

 

To view Royal Sovereign pouch films, click here.

The 8 Best Laminators of 2021

We are committed to researching, testing, and recommending the best products. We may receive commissions from purchases made after visiting links within our content. Learn more about our review process.

When looking for the best laminator, you want to choose a balance between speed, size, thickness capacity, and of course, the price tag. Additional features such as jam prevention and auto shut off can help you if you’re trying to choose between two similar laminators. Some laminators only have thermal technology and use heat to seal the laminating film and documents together. Others also have cold laminating capabilities – meaning the film and documents are pressed together. If speed is a factor, the ideal laminator for you will be one that warms up quickly and can laminate more inches per minute. With that said, if you’re looking for a laminator for your home, office, or classroom, check out our list of the best laminators below.

Final Verdict

If you want a laminator for handling regular-sized items, then go with the lightweight AmazonBasics Thermal Laminator (view at Amazon). It’s compact, budget-friendly, and gets basic jobs done. For bulk laminating jobs, splurge on the speedy GBC Fusion 7000L (view at Amazon), which is loaded with cool features.

What to Look for in Laminators


Speed

If you’ll only be laminating occasionally, you probably wouldn’t care so much about speed.

But if you’re doing lots of laminating, you’ll want something to churn out finished documents as efficiently as possible. Look at how long different models take to warm up, as well as how many inches per minute they can laminate to compare speeds.


Size

Will you be laminating standard size items like business cards or photos? Or, will you be dealing with odd shapes and sizes? Think about your intended use to see if you should go with a standard laminator or one that can accommodate larger document widths. Also, look at the mil thickness—this will affect how thin and flimsy or thick and sturdy your laminated documents will come out.


Features

Automatic paper jam and thickness detectors, built-in paper cutters, and different temperature settings are just a few of the features that laminators offer. If any of those bells and whistles are important to you, see what’s included in the laminators you’re considering getting.

FAQs

What can you laminate?

Laminators can be used to protect any piece of paper, from small documents like an insurance card or car registration to photos, school projects, and handouts. 


What’s better, a hot or cold laminator?

There are pros and cons to both hot and cold laminators. The main difference is that hot laminators use thermal heat whereas cold laminators use pressure and films with stronger adhesives. Cold models may be safer since there is no risk of getting burned, but they are also pricier. Some laminators also have a cold setting that lets you choose between hot and cold laminating methods. For heat-sensitive documents, such as old photos, cold lamination may be a better choice.

What is the best temperature for laminating?

Hot laminators usually get to temperatures over 210 degrees, though some films that are classified as “low melt” can laminate at lower temperatures (around 185 degrees).

Meet the Expert

This roundup was updated by Dawn Papandrea, a personal finance reporter who covers small business topics. She is a full-time freelancer with two decades of writing experience.

Laminating Roll Film | Lamination Rolls

Laminating Film Rolls come in many widths, lengths, and thicknesses for all kinds of roll, mounting, and wide format laminators. Typically coated with a thermally activated adhesive, these lamination rolls come in many styles including gloss, matte, UV safe, low melt, wide format, and GBC EZ Load to name a few. These rolls work with all kinds of roll laminators. Get all the sizes and thicknesses you need here!


The most common roll widths are 9″, 12″, 18″, 25″, and 27″, but go all the way up to 62″ for extra wide laminating.

We have all the lamination rolls you need no matter what brand of laminator you have. Standard lengths range from 100′ to 1000′ and even longer, with core sizes including 1″, 2 1/4″ (2.25″), and 3″.

Lamination rolls come in 1.2, 1.5, 1.7, 3, 5, 7, and 10 mil thicknesses, giving you plenty of options for flexible or sturdy lamination. We carry a full line of film rolls in thermal and cold (sticky) varieties, with hundreds of standard and specialty rolls available. Our Skyline and GBC clear lamination film is popular with schools and copy shops because it works great on a variety of substances.

Specialty laminate is available in digital, low melt, UV protected, and EZ load styles. Whether you are laminating standard materials, digital prints, glossy paper, signs, or have a special EZ Load laminator, we have the high quality lamination you need.

Looking for specific professional or education grade rolls, not sure where to begin, or have questions about lamination film? Call one of our friendly Laminating Specialists at 1-866-455-9900 and we’ll be happy to answer any questions you have and get you the rolls you need today!

Where to Get Something Laminated: 7 Laminating Services Listed

With the rise of digital record keeping, fewer people own laminating machines.

The digital age is convenient and helps cut down on waste, but there are still times when you may need to laminate something. Fortunately, several stores have lamination machines and will laminate your documents and projects for a fee. Alternatively, you can try laminating at home, either with your own lamination machine or a do-it-yourself option using some household items. Below, we explain where you can get something laminated as well as how to do it yourself.

What We Recommend

When you have frequent lamination projects, an economical option is to buy your own laminating machine and thermal plastic pouches so you can do the work yourself from the comfort of your own home, without having to make a trip every time you need to laminate something. You can also try a DIY lamination option, though you will still need to buy the plastic pouches.

If you have a large number of documents or projects that are unusually shaped, you may need to get them professionally laminated, and the most affordable options with nationwide availability and same-day turnaround times are Staples, FedEx, and Office Depot/OfficeMax stores.

The List

The following stores offer lamination services for a fee. We’ve ordered the list below starting with the most budget-friendly options and those with the most nationwide availability.

Staples

  • Service offered: Lamination of documents ranging from letter size to large format
  • Turnaround time: Lamination often can be done the same day, but you may want to come back the next day depending on how many projects are in the store’s queue.
  • Price range: Starting just below $2, and up to $2 per square foot
  • Find a Staples

FedEx Office

  • Service offered: Lamination of papers and posters up to 36″ x 48″
  • Turnaround time: Lamination can usually be done the same day, but you may want to come back the next day depending on how many projects are in the store’s queue.
  • Price range: Typically $1. 99 for 8.5″ x 11″ and $3.99 for 11″ x 27″, and $3 per square foot for oversized projects
  • Find a FedEx

Office Depot/OfficeMax

  • Service offered: Lamination of documents ranging from letter size to large format.
  • Turnaround time: Stores can laminate while you wait, or you can pick up your project the same day or the next day depending on the number of projects in front of yours.
  • Price range: Starting at $0.49 per page; a standard 8.5″ x 11″ sheet typically costs $1.99 to laminate. Contact your local store for pricing on other sizes.
  • Find an Office Depot or OfficeMax

Minuteman Press

  • Service offered: Lamination of documents ranging from letter size to large format
  • Turnaround time: Smaller pieces in standard sizes (8.5″ x 11″ and 11″ x 7″) are available for same-day lamination. Larger sizes take two days to complete.
  • Price range: Standard 8.5″ x 11″ sheets is $2.50 each. Prices are reduced as quantity increases. If your project isn’t a standard size, it will probably expensive to laminate unless you have a very large quantity (prices may be as much as $9/square foot). At Minuteman, a better option for oddly sized papers or documents is to print posters directly onto plastic.
  • Find a MinuteMan Press

The UPS Store

  • Service offered: Lamination of documents ranging in sizes. Some stores may offer larger sizes, but others only have a machine that can accommodate letter-sized documents and smaller.
  • Turnaround time: Same-day lamination is available. The process takes about 10 minutes per page.
  • Price range: 8.5″ x 11″ page is $3.50
  • Find a UPS Store

Local Teacher Supply Stores

Note: This is a type of store that you can usually find somewhere nearby. They often have lamination services, but you should check your local store’s website or call to confirm.

  • Service offered: Lamination of documents ranging from letter size to large format
  • Turnaround time: Varies; contact a local store for turnaround times and service options
  • Price range: Most are reasonably priced, and start at just $0.50/square foot.
  • Find a store using a Google search for “teacher supply store near me.”

Laminating at Home With a Laminator

If you need to laminate things frequently or only have large or uniquely shaped documents, a home laminating system might be right for you. Homeschoolers, teachers, and business owners will often find it useful to own a laminating machine. You may need to laminate signs that are posted around an office or factory, restaurant menus, nametags, or directional signs for conferences. Home use of lamination can include making placemats that are easy to clean, preserving a child’s artwork or school projects, creating a chore chart that functions as a dry erase board, or protecting learning materials that are used often or by many different children.

You can find tabletop laminators starting at around $30 on Amazon, while more complex machines can cost more than $1,000. The larger the machine, the more expensive it will be.

Also, keep in mind that you’ll need to buy plastic laminating page pockets to operate the machine. These supplies will increase the cost of laminating. You can find laminating sheets for about $15 per pack of 100 on Amazon, but prices will vary depending on how thick you want the lamination to be.

How to Laminate at Home Without a Laminator

If you want to laminate at home but don’t want to invest in a machine, there’s an easy way to do a DIY lamination project. You’ll still need to buy the thermal laminating pouches used in home laminating machines. Simply place your item in the pouch and put it on an ironing board. Put an old towel or cloth over the page and run a hot iron (no steam) over the towel to laminate the page. You’ll want to spend a few minutes doing this and make sure to get the corners. Once completed, your documents should be fully sealed as if they had passed through a laminator.

For step-by-step instructions about this method and other home lamination methods, see the video below:

Lamination – an overview | ScienceDirect Topics

9.8 Using aluminium foil as a laminate

Lamination involves combining sheets of different materials into a single layer, using a mixture of adhesives, pressure and sometimes temperature to bond the materials together (see also Chapter 14). Aluminium foil is laminated on web-fed rotary equipment which sometimes includes a coating unit to add further protection. Adhesives are selected on the basis of their suitability for the materials to be joined as well as such issues as any toxicity or contamination risk they might present, potential odour or colour issues, moisture and heat resistance. The main types of adhesives used are:

heat-sealable adhesives

water-soluble emulsions and dispersions

thermoplastics in lacquer-type solvents

hot melts (natural or synthetic waxes)

extruded-film adhesives.

Four methods are used to laminate aluminium foil:

wet bonding

dry bonding

extrusion bonding

hot-melt bonding.

As the name suggests, wet bonding involves combining the various layers before the adhesive is dry. A water-or solvent-based adhesive is used and is normally applied to the foil. Further layers are then applied on top and the laminate passed through a combining or nip roll at varying drying temperatures, depending on requirements (Fig. 9.4). Materials laminated to the foil base need to be porous so that the liquid medium of the adhesive can be taken up and the adhesive properly dried, thus paper is an ideal material for wet bonding. The smoother, denser and less porous the paper, the less adhesive is required. A low paper moisture content is important to ensure good adhesion and prevent problems such as staining. It is important to combine and glue the materials quickly to ensure good adhesion and prevent materials slipping as they are fed through the machine. The use of a rapidly setting adhesive also helps to minimise the risk of air pockets or blisters in the laminate, particularly if the laminate is stressed or flexed in subsequent processing, e.g. coating operations. High drying temperatures improve bonding and water resistance, but they can over-dry and damage papers or boards.

9.4. Wet-bonding foil lamination processes.

Where materials are not porous, dry bonding is used instead of wet bonding. Dry-bond adhesives use both natural and synthetic sealing agents and can be either water or organic solvent based (see Chapter 16). Synthetic agents include vinyls, epoxies, polyesters and urethanes. The adhesive is applied to the foil and allowed to dry. The layers are then aligned and passed through a heated combiner roll which reactivates the adhesive to create the bond. This method is well suited to non-porous materials such as polyester films, which add strength and flexibility when combined with aluminium foil.

Extrusion bonding involves extrusion of one or two molten plastic films which are then combined with the aluminium foil. As the aluminium foil web approaches the combiner roll, an extruder die deposits a layer of hot extrudate across the width of the web. The laminate then passes through the chilled nip of the combiner roll, cooling the plastic layer which solidifies. No drying is required. When only the two layers are involved, the process is known as extrusion coating.

The hot-melt process is used for high-speed lamination since there is no need for a drying stage. Hot melts include polymer resins, waxes and resin-wax combinations. The hot-melt can be melted at a lower temperature than extruded coatings, applied to the web and chill-set in the nip of the combiner roll. The plastic nature of the hot melt improves heat-sealability and the dead-fold characteristics of the foil.

Foil laminates intended for barrier applications should be evaluated for their barrier properties using the finished pack after all of the machining is complete, and preferably after a real or simulated shipping cycle. It is not uncommon for a prospective barrier laminate to have no measurable permeability when flat (i.e. at the point of manufacture) but to have significant permeability when formed, folded and creased into a final pack format.

Nationwide Laminating & Finishing – Production Guide

i. 1-sided specs

Our standard film is 1.2 Polypropylene unless otherwise noted.)

SHEET SPECS:

  • Minimum Sheet Size 11″ x 17″
  • Maximum Sheet Size 28″ x 40″
  • Minimum Stock Thickness #80 Coated Text
  • Maximum Stock Thickness 24 point board
  • 1/2″ – 3/4″ Minimum clearance beyond your image area to be laminated.
  • ALWAYSCLEARLY MARK GRIPPER & SIDE GUIDE
  • Sheets should be dry and free of press powder

INK AND COATING SPECS:

  • Imitation Metallic Inks are recommended – Metallics may not laminate properly
  • Use Wax Free Inks
  • Varnishes and aqueous coatings should be compatible
  • Ink, Varnish and Primers MUST be 1/2″ from all four sides of any sheet
  • Silk Screen and copier inks will not laminate
  • Thermal copies and faxes are not recommended for lamination

REMEMBER FOR ONE SIDED LAMINATING:

  • Matte Polypro Films may scuff on dark colored stock. We suggest Matte Polyester film for dark colors.
  • Films are available in gloss and matte (Non-glare) finish
  • Plastic & Vinyl stock may blister, so send overs for testing
  • Scoring, Perfing and Die cutting is completed AFTER lamination

. ii. 2-sided specs

SPECS FOR SEALED EDGES:

  • Minimum Sheet Size: 2″ x 3.5″
  • Maximum Sheet Size: 27″ x 40″
  • Maximum Film Coverage: 26″ wide on sealed edges
  • Your paper must be cut to finished size
  • Plastic will extend beyond paper 1/8″ plus or minus 1/16″ unless otherwise specified
  • If multiple scores are required, allow room in your printing for the sealed edge plus 1/16″ – 1/8″ so the sheet will not buckle when folded
  • Text weight, web stocks or color copies may wrinkle or wave – send overs for testing

 SPECS FOR FLUSH CUTS:

  • Always supply Rule-ups and CLEARLY MARK GRIPPER & SIDE GUIDE
  • We will keep film clean on your gripper and side guide only
  • We require 1/4″ minimum around the image area that you wish to laminate
  • Scoring, perfing and die cutting is completed AFTER lamination

REMEMBER:

  • Any required scoring is completed BEFORE lamination
  • On rounded corners, plastic is rounded on sealed edges using 3, 5, or 10 mil films only. 1.5 mil sealed edge will not round corner.
  • For the best bond, do not apply coatings prior to lamination
  • Sheets must be completely dry and free of press powder
  • Imitation Metallic Inks are recommended – Metallics may not laminate properly
  • Provide adequate overs, especially when other finishing is required

iii. Wire-o Binding Specs

iv. Plastic Coil Specs

MECHANICAL BINDING SPECS:

  • Allow 1/4″ – 3/8″ trim off signature spines
  • Use light perforation on head and spine (please do not over perforate which could create gathering problems with signatures pulling apart)
  • FOR SIGS UP TO 16 PAGES: Allow 1/8″ head, 1/8″ face, and 1/8″ foot trim.
  • FOR SIGS OVER 16 PAGES: Allow 1/4″ head, 1/4″ face, and 1/8″ foot trim.
  • NOTE: These trims can be adjusted to accommodate web cut offs and different sheet sizes. Please advise if different trims are needed.
  • Signatures must be folded WITHOUT a lip
  • Paper grain should run parallel to binding edge
  • Shrink-wrapping is available to avoid scuffing problems that may occur in transit

The following are measurements from the edge of the trimmed sheets to the inside edge of the punched hole. Copy should be laid out to avoid this area.

Plastic Spiral:

1/4″

All bulks

Wire-O:

1/4″ (3:1)

Up to 7/16 bulk of book

Wire-O:

3/8″ (2:1)

Over 7/16 bulk of book

v. Die Cut Specs

  • Minimum Sheet Weight: 60# (.003)
  • Maximum Sheet Weight: 24 Pt.
  • Minimum Sheet Size: 8 1/2″ x 11″
  • Maximum Sheet Size: 25″ x 35″
  • 1/2″ Gripper is needed, (allow 1″ to the first knife on grid side)
  • ALWAYS CLEARLY MARK GRIPPER & SIDE GUIDE
  • Inks MUST be completely dry to prevent offsetting
  • Allow 3/16″ Min. color bleed beyond die cut areas to assure registration
  • Block out all inks and coatings glue areas
  • Provide a ruled out press sheet plus a full sheet film positive OR a ruled out press sheet plus a die vinyl
  • Provide us with a production sample if available
  • ALL die quotes are subject to final review of artwork

Lamination of printed products. Film lamination of business cards, menus, leaflets, postcards.

Lamination – covering with a protective matte or glossy film of various printing products to protect against the negative consequences of use. It is often used for post-printing processing of business cards, restaurant menus, photo calendars, diplomas, certificates, flyers, euro booklets, price lists and other products. Films from 25 to 175 microns are most commonly used for lamination.For the menu, for example, we use 25 micron film, which is ideal for this type of printing product: there is no separation of the film from the paper on the folds, the fold remains elastic and does not spring. Lamination 75-100 microns is used for laminating business cards.

Cost of lamination, A3 format

Type 25 micron 100 microns 175 micron
Glossy 6 UAH 20 UAH 40 UAH
Matt 35 UAH 70 UAH

Matte lamination – conveys muted, velvety shades, and the appearance is expensive and prestigious.On matte lamination, you can write with a pen and erase the inscriptions without any problems. It is used more often for business cards. has a respectable appearance and has a plastic effect.
Glossy lamination – in comparison with matte lamination, it gives prints more saturated and contrasting colors. Most often used for printing menus. the color scheme of the product looks more juicy and lively. Lamination can be either rolled – 25 microns, and envelope – 100 and 175 microns. It is worth noting that roll lamination can be one- and two-sided.You can, for example, make the front side matte, and the back glossy, or vice versa. The production time depends on the selected type of lamination and on the quantity of ordered products. Both for one set of business cards and for 20 laminated menus with two folds, the standard production time is “from today to tomorrow”, but urgent production of an order is also possible. we have our own production.

Advantages of laminated products over non-laminated ones:

  1. durability,

  2. “plastic printing”,

  3. paint on the edges after cutting does not peel off, even if the layout is completely black, and the edges at the cut are perfect.

For almost any product, you can order not only creasing (fold), but also rounding the corners, which will make the business card “not prickly” and will extend the service life of the product.

Lamination of documents in Moscow, prices

Even with the most careful handling, paper, even the highest quality paper, wears out rather quickly. In order to keep a document or photo in its original form, you will need double-sided lamination. It consists in the fact that a layer of transparent plastic is applied to the paper sheet on both sides.This double-sided lamination makes the product more durable, and the inscriptions and images applied to it become more vivid. An additional advantage is that dirt does not stick to the laminated surface.

There are two laminating technologies:

1. Roll. It consists in covering the documents with film in rolls. This lamination technology is suitable for large batches of printed products. It saves time and has a more affordable price.

2.Batch. Lamination technology, which implies the use of bags of a certain size. Suitable for processing a small amount of paper.

If you need to protect your documents or photos with transparent plastic, you should contact the lamination salon that guarantees the high quality of any service, for example, printing. Modern technology from leading manufacturers and excellent materials make double-sided lamination of printed products of any format, fast and high-quality.

The imprint center works constantly, seven days a week, so it will help you out when you need urgent two-sided lamination of documents, 24 hours a day. It doesn’t matter how quickly the job gets done. We guarantee: any double-sided lamination will be done by us in a short time, without delays.

We carry out lamination of any printed products: documents, certificates, diplomas, business cards, brochures, etc. We can order the strengthening of cardboard calendars, gift paintings.We accept for work any number of sheets. We are located in a developed area of ​​Moscow, next to the Tsvetnoy Bulvar metro station.

How to order?

In the copy center “VP24.ru” you can order a print of any complexity, including final processing, one- or two-sided lamination. Applications are accepted by phone

+7 (495) 648-61-59; +8 (800) 333-12-46

Additionally, design studio services are provided, delivery in Moscow. Information about payment, placing orders and cooperation agreement is posted HERE.

Colored plastic windows inexpensively in Moscow, laminated windows from the Okna R company

Lamination options for plastic windows

A plastic window with lamination will allow you to recreate the planned design in an apartment or a country house. This is a great opportunity to decorate a window opening, to accentuate it, to give a unique style to the interior. Beyond aesthetics, laminated the film gives additional protection to the profile from abrasion and mechanical damage, increasing the service life of the structure by several years.

Depending on the customer’s wishes, plastic windows can be produced with three types of profile lamination:

Single-sided

One-sided method is used to decorate a plastic structure from the inside or outside. If the design idea for decorating the interior of a room includes the use of a plastic window with imitation wood, then laminate the profile can be from the inside, and the outside can be left white.This will reduce the cost of purchasing the structure and maintain a single building facade. If the facade of the building, on the contrary, implies the style of the window in color, then lamination is performed from the street side.

Single-leaf window

RUB 5,749


for
key:

RUB 10,035 Size
600 x 1200 mm (0.72 m 2 )
  • Blitz Profile
  • Single-sided lamination
  • Swing sash
Double-leaf window

11 044 rub


under
key:

18 346 rbl Size
1330 x 1410 mm (1.87 m 2 )
  • Blitz Profile
  • Single-sided lamination
  • Fixed and tilt and turn sashes
Three-leaf window

RUB 13,837


for
key:

22 634 rub Size
1760 x 1420 mm (2.50 m 2 )
  • Blitz Profile
  • Single-sided lamination
  • Blind and tilt and turn leaves
Balcony block

18 733 rubles


under
key:

30 998 rub Size
1550 x 2100 mm (2.05 m 2 )
  • Blitz Profile
  • Single-sided lamination
  • Window and door revolving

Double-sided

Profile lamination on both sides is used for the simultaneous solution of design tasks from inside the premises and from the street.The film covers only the surface of the profile, the ends in the places where the fittings are installed remain white. Colored handles and hinges look great with double-sided lamination. The colors of the outer and inner films may differ.

Single-leaf window

RUB 9,906


under
key:

14 192 rbl Size
600 x 1200 mm (0.72 m 2 )
  • Blitz Profile
  • Double-sided lamination
  • Swing sash
Double-leaf window

19 028 rub


under
key:

26 330 rbl Size
1330 x 1410 mm (1.87 m 2 )
  • Blitz Profile
  • Double-sided lamination
  • Fixed and tilt and turn sashes
Three-leaf window

23 841 rub


under
key:

32 638 rub Size
1760 x 1420 mm (2.50 m 2 )
  • Blitz Profile
  • Double-sided lamination
  • Blind and tilt and turn leaves
Balcony block

32 275 rubles


under
key:

44 540 rub Size
1550 x 2100 mm (2.05 m 2 )
  • Blitz Profile
  • Double-sided lamination
  • Window and door revolving

Profile lamination in bulk

To avoid white ends with double-sided lamination, use a colored profile in bulk.It comes in three varieties: brown, cream, and caramel.

On the basis of a colored profile, lamination on both sides looks more natural, it is difficult for the naked eye to distinguish such a structure from a natural wooden window. Base options allow you to choose the perfect shade for the laminate.

Laminated window care

Like white constructions, PVC windows with colored or wood-like film do not require special maintenance.When washing, use liquid products without abrasive substances and a soft cloth. After leaving, the surface of the product is wiped dry.

The film does not fade and does not change its properties due to temperature changes. Colored plastic windows retain their original appearance and delight the owners for many years.

Film for lamination in Togliatti and Samara

How to choose a film for lamination?

Film for lamination is available in batch and roll.

Pouch Film for Laminators is available in both format and non-format. Cut film is slightly larger than standard paper. For example, a sheet of A4 paper has a size of 210×297 mm. For him, a bag film with a size of 216×303 mm is produced. Oversized film is available in various options, for example: 54×86 mm, 111×154 mm and other sizes.

In the sale of many firms selling stationery in Togliatti, you can buy film for lamination format from A7 to A3.Film for lamination is produced even in the A2 format (426x600mm), but it is mainly supplied on request.

Fellowest A4 laminating film, 125 microns thick, 100 pcs. included.

If you rarely use a laminator, it is convenient to buy a set of laminating films. Typically, these sets contain several packages of film of various formats, from A7 to A4. You can just buy A4 film and cut out blanks of the required size from it. Not very convenient, but economical.

Pouch films for lamination, in addition to size, vary in thickness. The minimum thickness is 75 microns. Maximum – 250 microns. Film for laminating 75, 100, 125 microns is most widely available in retail in Samara and Togliatti.

When choosing a film by thickness, be sure to check the ability of your laminator to work with such a film. Reasonably assess the need for a thicker film. Maybe it makes no sense to buy a thicker and more expensive film? It all depends on what ultimate goal you are pursuing.

The film can also be matte or glossy. The matte film does not leave fingerprints or reflections. Glossy film enhances the color contrast of the image, glossy sheen.

For large format materials, use roll film for lamination. But this is done by professionals and not in the office.

Films with an adhesive base are also used for lamination. No laminator is required to use it.

Laminating film is not sold per piece, only in sets of 25 pcs.


You can buy film for lamination in Togliatti, Syzran and Samara in our online store.

We always support the necessary range of consumables for office equipment, including films for lamination.

Recommended: How to choose a laminator? Corporate gifts

Machine for laminating in Moscow

How to choose a lamination machine?

It is a device for covering papers and documents with a special thin film.For any office or printing workshop, a laminating machine is as essential as a binder or paper cutter.

Used for the following purposes:

  • preparation of documents for storage;
  • 90,054 preparation of advertising materials, menus, etc .;
  • production of souvenir calendars and postcards;
  • photo decoration;
  • creating board games, textbooks, tablets, etc.

Lamination technology has appeared quite recently, but has already managed to gain leading positions in the printing market. With its help, you can preserve the appearance of important papers for a long time and protect them from mechanical damage and dust. Among the common types of equipment are batch and roll.

A batch laminator seals on both sides, in the process uses ready-made film envelopes, is used in photo studios, offices, printing houses, etc. Such devices can have a different heating method.According to this principle, they are divided into types:
  • with hot shafts;
  • with hot plates.

The first lamination method provides a high-quality coating of “difficult” paper – coated or photo paper. Another device is used for embossing and glossing. The second option is simpler and is used mainly in simple economical models. In addition, the paper size is an important parameter. The most popular A4 laminator in offices and at home.

The roll laminator is used in the manufacture of cartographic and printing products, and with the help of it they produce outdoor and indoor advertising. The temperature and heating time can be adjusted manually. The device can be controlled using an interface with buttons for setting various modes of operation and with a liquid crystal display.

Well-known manufacturers of laminating machines include Fellowes, FGK, AXONE, BURO, Bulros, Boway, DSB and many others.Their products are of high quality workmanship and excellent performance. Numerous device users have already been convinced of this.

Online store DA-office.ru specializes in the sale of office equipment in Moscow with delivery to other cities of Russia. Here you can choose a laminator and buy it at an affordable price along with all formats of film for lamination, as well as binding machines, paper shredders, springs and covers for binding.Discounts are available for regular customers. Product quality is guaranteed!

Customer Reviews

All reviews

Excellent shop

Pluses: Everything is fine. Purchase method: Pickup. Podolsk.

Disadvantages: None

Artem H.(artemkhristov), ​​1 August 2021

Excellent shop

Advantages: Clear and fast. Good order management by the manager. Order: 5742 Purchase method: Delivery. Moscow.

Disadvantages: No

Sergey Ya.

Related Posts

Leave a Reply