Iron on ribbon: Selection of Iron On and Heat Seal Trims

Содержание

Iron Ribbon | AMERICAN ELEMENTS ®


SECTION 1. IDENTIFICATION

Product Name: Iron Ribbon

Product Number: All applicable American Elements product codes, e.g. FE-M-02-RI
, FE-M-03-RI
, FE-M-04-RI
, FE-M-05-RI

CAS #: 7439-89-6

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
The substance is not classified as hazardous to health or the environment according to the CLP regulation.
Classification according to Directive 67/548/EEC or Directive 1999/45/EC
N/A
Information concerning particular hazards for human and environment:
No data available
Hazards not otherwise classified
No data available
Label elements
Labelling according to Regulation (EC) No 1272/2008
N/A
Hazard pictograms
N/A
Signal word
N/A
Hazard statements
N/A
WHMIS classification
Not controlled
Classification system
HMIS ratings (scale 0-4)
(Hazardous Materials Identification System)
HEALTH
FIRE
REACTIVITY



Health (acute effects) = 0
Flammability = 0
Physical Hazard = 0
Other hazards
Results of PBT and vPvB assessment
PBT:
N/A
vPvB:
N/A


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Substances
CAS No. / Substance Name:
7439-89-6 Iron
Identification number(s):
EC number:
231-096-4


SECTION 4. FIRST AID MEASURES

Description of first aid measures
General information
No special measures required.
If inhaled:
Supply patient with fresh air. If not breathing, provide artificial respiration. Keep patient warm.
Seek immediate medical advice.
Seek medical treatment in case of complaints.
In case of skin contact:
Immediately wash with soap and water; rinse thoroughly.
Generally the product does not irritate the skin.
Seek immediate medical advice.
In case of eye contact:
Rinse opened eye for several minutes under running water. Consult a physician.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
If swallowed:
Seek medical treatment.
Information for doctor
Most important symptoms and effects, both acute and delayed
No data available
Indication of any immediate medical attention and special treatment needed
No data available


SECTION 5. FIREFIGHTING MEASURES

Extinguishing media
Suitable extinguishing agents
Special powder for metal fires. Do not use water.
For safety reasons unsuitable extinguishing agents
Water
Special hazards arising from the substance or mixture
If this product is involved in a fire, the following can be released:
Iron oxides
Advice for firefighters
Protective equipment:
No special measures required.
Wear self-contained respirator.
Wear fully protective impervious suit.


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Keep unprotected persons away.
Not required.
Ensure adequate ventilation
Environmental precautions:
Do not allow material to be released to the environment without official permits.
Do not allow product to enter drains, sewage systems, or other water courses.
Do not allow material to penetrate the ground or soil.
Methods and materials for containment and cleanup:
Pick up mechanically.
Prevention of secondary hazards:
No special measures required.
Reference to other sections
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.


SECTION 7. HANDLING AND STORAGE

Handling
Precautions for safe handling
Keep container tightly sealed.
Store in cool, dry place in tightly closed containers.
Information about protection against explosions and fires:
No special measures required.
Conditions for safe storage, including any incompatibilities
Requirements to be met by storerooms and receptacles:
No special requirements.
Information about storage in one common storage facility:
Not required.
Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well-sealed containers.
Specific end use(s)
No data available


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Additional information about design of technical systems:
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Control parameters
Components with limit values that require monitoring at the workplace:
7439-89-6 Iron (100.0%)
EV (Canada) Long-term value: 1* 5** mg/m3
as iron;*salts, wate
r-soluble;**welding fume
TLV (Canada) Long-term value: 5 mg/m3
Additional information:
No data
Exposure controls
Personal protective equipment
Follow typical protective and hygienic practices for handling chemicals.
Keep away from foodstuffs, beverages and feed.
Remove all soiled and contaminated clothing immediately.
Wash hands before breaks and at the end of work.
Maintain an ergonomically appropriate working environment.
Breathing equipment:
Use suitable respirator when high concentrations are present.
Not required.
Protection of hands:
Impervious gloves
Not required.
Penetration time of glove material (in minutes)
No data available
Eye protection:
Safety glasses
Body protection:
Protective work clothing


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties
Appearance:
Form: Solid in various forms
Color: Grey
Odor: No data available
Odor threshold: No data available.
pH: N/A
Melting point/Melting range: 1538 °C (2800 °F)
Boiling point/Boiling range: 2740 °C (4964 °F)
Sublimation temperature / start: No data available
Flammability (solid, gas)
No data available.
Ignition temperature: No data available
Decomposition temperature: No data available
Autoignition: No data available.
Danger of explosion: No data available.
Explosion limits:
Lower: No data available
Upper: No data available
Vapor pressure: N/A
Density at 20 °C (68 °F): 7.87 g/cm3 (65.675 lbs/ga
Bulk density at 20 °C (68 °F): 2900 kg/m3
Relative density
No data available.
Vapor density
N/A
Evaporation rate
N/A
Solubility in Water (H2O): Insoluble
Partition coefficient (n-octanol/water): No data available.
Viscosity:
Dynamic: N/A
Kinematic: N/A
Other information
No data available


SECTION 10. STABILITY AND REACTIVITY

Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Thermal decomposition / conditions to be avoided:
Decomposition will not occur if used and stored according to specifications.
Possibility of hazardous reactions
No dangerous reactions known
Conditions to avoid
No data available
Incompatible materials:
No data available
Hazardous decomposition products:
Iron oxides


SECTION 11. TOXICOLOGICAL INFORMATION

Information on toxicological effects
Acute toxicity:
The Registry of Toxic Effects of Chemical Substances (RTECS) contains acute toxicity
data for this substance.
LD/LC50 values that are relevant for classification:
Oral LD50 30000 mg/kg (rat)
Skin irritation or corrosion:
Powder: irritant effect
Eye irritation or corrosion:
Powder: irritant effect
Sensitization:
No sensitizing effects known.
Germ cell mutagenicity:
No effects known.
Carcinogenicity:
The Registry of Toxic Effects of Chemical Substances (RTECS) contains tumorigenic and/or carcinogenic and/or neoplastic data for this substance.
No classification data on carcinogenic properties of this material is available from the EPA, IARC, NTP, OSHA or ACGIH.
Reproductive toxicity:
No effects known.
Specific target organ system toxicity – repeated exposure:
No effects known.
Specific target organ system toxicity – single exposure:
No effects known.
Aspiration hazard:
No effects known.
Subacute to chronic toxicity:
The Registry of Toxic Effects of Chemical Substances (RTECS) contains multiple dose toxicity
data for this substance.
Additional toxicological information:
To the best of our knowledge the acute and chronic toxicity of this substance is not fully known.
Carcinogenic categories
OSHA-Ca (Occupational Safety & Health Administration)
Substance is not listed.


SECTION 12. ECOLOGICAL INFORMATION

Toxicity
Aquatic toxicity:
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Additional ecological information:
Do not allow material to be released to the environment without official permits.
Avoid transfer into the environment.
Results of PBT and vPvB assessment
PBT:
N/A
vPvB:
N/A
Other adverse effects
No data available


SECTION 13. DISPOSAL CONSIDERATIONS

Waste treatment methods
Recommendation
Consult official regulations to ensure proper disposal.
Uncleaned packagings:
Recommendation:
Disposal must be made according to official regulations.


SECTION 14. TRANSPORT INFORMATION

UN-Number
DOT, ADN, IMDG, IATA
N/A
UN proper shipping name
DOT, ADN, IMDG, IATA
N/A
Transport hazard class(es)
DOT, ADR, ADN, IMDG, IATA
Class
N/A
Packing group
DOT, IMDG, IATA
N/A
Environmental hazards:
N/A
Special precautions for user
N/A
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
N/A
Transport/Additional information:
DOT
Marine Pollutant (DOT):
No


SECTION 15. REGULATORY INFORMATION

Safety, health and environmental regulations/legislation specific for the substance or mixture
National regulations
All components of this product are listed in the U.S. Environmental Protection Agency Toxic Substances Control Act Chemical substance Inventory.
All components of this product are listed on the Canadian Domestic Substances List (DSL).
SARA Section 313 (specific toxic chemical listings)
Substance is not listed.
California Proposition 65
Prop 65 – Chemicals known to cause cancer
Substance is not listed.
Prop 65 – Developmental toxicity
Substance is not listed.
Prop 65 – Developmental toxicity, female
Substance is not listed.
Prop 65 – Developmental toxicity, male
Substance is not listed.
Information about limitation of use:
For use only by technically qualified individuals.
Other regulations, limitations and prohibitive regulations
Substance of Very High Concern (SVHC) according to the REACH Regulations (EC) No. 1907/2006.
Substance is not listed.
The conditions of restrictions according to Article 67 and Annex XVII of the Regulation (EC) No 1907/2006 (REACH) for the manufacturing, placing on the market and use must be observed.
Substance is not listed.
Annex XIV of the REACH Regulations (requiring Authorisation for use)
Substance is not listed.
REACH – Pre-registered substances
Substance is listed.
Chemical safety assessment:
A Chemical Safety Assessment has not been carried out.


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2021 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

46in. Twisted Ribbon Iron Base Console Table

*Rewards: Purchases subject to credit approval. At Home Insider Perks Credit Cardholders are eligible to earn rewards on purchases made with their At Home Insider Perks Credit Card or At Home Insider Perks Mastercard account. Rewards apply to net card purchases (purchases minus returns and adjustments). Cardholders will earn five (5) points for each dollar ($1) of net card purchases made in At Home store locations. At Home Insider Perks Mastercard cardholders will earn three (3) points for every dollar ($1) spent in the category of Groceries and one (1) point for every other dollar ($1) in net card purchases made at any other participating merchant or services where Mastercard is accepted. Points will be deducted for any returns or credits made on the cardholder account. Points will appear on your monthly statement. A $5 reward certificate (“Reward Certificate”) will be issued for every 500 points earned. Reward Certificates may be issued in $5, $10, $15 or $20 denominations. A cardholder can receive up to four (4) Reward Certificates per statement month. Reward Certificates are valid for 90 days from issue date. See the At Home Insider Perks Credit Card and At Home Insider Perks Mastercard Rewards Program Terms for complete details.

**10% off your first purchase. Subject to credit approval. Valid for new accounts only. Valid for one-time use. Limit one offer per customer. Cannot be combined with At Home promotional discounts other than markdown and clearance priced merchandise. Offer does not apply to gift cards or taxes and cannot be applied toward prior sales. Offer excludes J.A. Henckels®. Coupon must be presented and surrendered at checkout for redemption. At Home is not responsible for and will not replace lost or stolen coupons and will not accept coupons that are electronically or mechanically reproduced, forged, defective, altered or obtained through unauthorized channels. Coupon cannot be redeemed as cash or merchandise credit if merchandise is returned. No cash value.

***No interest if paid in full within 6 months on At Home in-store purchases of $299 or more. Interest will be charged to your account from the purchase date if the promotional balance is not paid in full within six months. Minimum monthly payments required. No interest will be assessed on the promotional purchase if you pay the following (the “promotional balance”) in full within 6 months: 1) the promotional purchase amount, and 2) any related optional debt cancellation charges. If you do not, interest will be assessed on the promotional balance from the date of purchase. Depending on purchase amount, promotion length and payment allocation, the required minimum monthly payments may or may not pay off purchase by end of promotional period. Regular credit terms apply to non-promotional purchases and after promotion ends to promotional purchases. For new accounts: Variable purchase APR is 26.99%. Minimum interest charge is $2.00. All APRs are accurate as of 6/1/2020 and will vary with the market based on the Prime rate as defined in your credit card agreement. Existing cardholders should see their credit card agreement for their applicable terms. Subject to credit approval. We reserve the right to discontinue or alter the terms of this offer at any time.

‡For new accounts: Purchase APR is 26.99%; Minimum Interest Charge is $2.

The At Home Insider Perks Mastercard is issued by Synchrony Bank pursuant to a license by Mastercard International Incorporated. Mastercard is a registered trademark, and the circles design is a trademark of Mastercard Incorporated.

Reflective Ribbon – Iron Horse Safety Fabrics




Pattern #744 “GROSSGRAIN” *DRIP DRY * NO IRON NECESS.
100% Polyester *MACHINE WASHABLE
10 – 20 – 100 *DRY CLEANABLE *



Some colors may take up to 2 weeks, cause we dont keep all colors in stock!














Ribbon Width

Reflective Width 
(silver)

Heat On or Sew On

3″

1″

3″

3/4′

3″

1/2″

2 1/4″

1″

2 1/4″

3/4″

2 1/4″


1 1/2″

1′

1 1/2″


1 1/2″

1/2″

7/8″


7/8″

1/2″

5/8″

1/2″

 









 









Neon Orange #315

 

Pink # 247

 

 

 

ID 1032 America USA Ribbon Patch Flag Patriotic Embroidered Iron On Applique Patches & Pins Accessories ugaurbanag.com



ID 1032 America USA Ribbon Patch Flag Patriotic Embroidered Iron On Applique Patches & Pins Accessories ugaurbanag.com

ID 1032 America USA Ribbon Patch Flag Patriotic Embroidered Iron On Applique,Flag Patriotic Embroidered Iron On Applique ID 1032 America USA Ribbon Patch, Pre-heat iron to hottest temperature setting, DO NOT USE STEAM DURING APPLICATION, 2, Surface of fabric,New Embroidered Iron On Patch, Size is approximately 1 1/4 wide and 2 1/2 tall, Missouri sales tax applies to all Missouri customers, Manufactured By Cool-Patches Iron on Instructions: 1,Affordable shipping,Fast Free Shipping,Manufacturer Price,Buy online, direct from the factory! ID 1032 America USA Ribbon Patch Flag Patriotic Embroidered Iron On Applique ugaurbanag.com.

ID 1032 America USA Ribbon Patch Flag Patriotic Embroidered Iron On Applique

Skip to content

ID 1032 America USA Ribbon Patch Flag Patriotic Embroidered. New Embroidered Iron On Patch. Size is approximately 1 1/4 wide and 2 1/2 tall. Missouri sales tax applies to all Missouri customers. Manufactured By Cool-Patches Iron on Instructions: 1. Pre-heat iron to hottest temperature setting. DO NOT USE STEAM DURING APPLICATION. 2. Surface of fabric. New Embroidered Iron On Patch.。Size is approximately 1 1/4″ wide and 2 1/2″ tall.。 。Missouri sales tax applies to all Missouri customers.。Manufactured By Cool-Patches。Iron on Instructions:。1. Pre-heat iron to hottest temperature setting. DO NOT USE STEAM DURING APPLICATION.。2. Surface of fabric should be clean before applying. 。3. Preheat fabric where attaching patch for 10-20 seconds. 。4. Position patch on garment. Cover design with thin cloth.。5. Press straight down for 20-30 seconds with constant pressure NO BACK AND FORTH! 。6. Turn the garment inside out and repeat. 。

ID 1032 America USA Ribbon Patch Flag Patriotic Embroidered Iron On Applique

Animal Print Hat Pin }{ 10\u201d Long Sturdy Steel Stick & Clutch to Use and Wear }{ Brown }{ Derby Victorian Hatpin HP554. hair clip barrette with blue agate gemstone. Key Fob Bracelet Key Loop Keychain Bracelet Bangle Keychain Bracelet O Key Ring Silicone Key Ring Key Saver Key Organizer, Metallic Silver Cinch Belt Skinny Leather Belt Women Girls Sparkle Faceted Rhinestones Metal Studs Vintage 47x 34 Waist Glamour Rave Prom. Cute Kawaii Dessert Sea Animal Shark Dessert Funny Sweets Sundae Shark Hard Enamel Silver 30mm pin. Amazing Details FOOTBALL HELMET Lapel Pin Tack Pin E23, Cowboy Hat Cufflinks Graduation Gift Western Hat Cufflinks Wedding Cuff Links Men’s Cuff Links Father’s Day Cufflinks, Mandala bandana Headband with Mandala Neck Gaiter with colorful mandala Yoga headband. 1x 6 1x 5 Ems Emt medic Custom text Name Text Your Text patch EMT EMS Medic patch with hook backing or sew on patch size 1x 4, White and Blue Patriotic Minimalist Paracord or Parachute Cord ID Lanyard with a Lobster Claw Clasp or Clip Red. classy embroidered patch on cuff High Quality Beanie Atlanta Name on Top Atlanta Braves Team Colors on a Knit Cuffed Beanie POM hat cap, Customized Embroidered Hats With Your Logo Company Logo Hat Flexfit Hats 280 Flexfit Delta Unipanel Seamless, Lanyard made from Jack Skellington ribbon with swivel clip and break clasp. baby souvenir photo birth animation lot of 20 rainbow baby shower Baby steps cards, her or best friend’s Photo NecklaceKeychain Christmas Gift for him Use Your Photo and Personalize with your own Words, Sandbar stripe winter scarf.

ID 1032 America USA Ribbon Patch Flag Patriotic Embroidered Iron On Applique

Pre-heat iron to hottest temperature setting, DO NOT USE STEAM DURING APPLICATION, 2, Surface of fabric,New Embroidered Iron On Patch, Size is approximately 1 1/4 wide and 2 1/2 tall, Missouri sales tax applies to all Missouri customers, Manufactured By Cool-Patches Iron on Instructions: 1,Affordable shipping,Fast Free Shipping,Manufacturer Price,Buy online, direct from the factory!

DIY Personalized Ribbon with Cricut EasyPress Mini

If you’re a Cricut fan, I’m sure you’ve seen the exciting news that they have a new product that they’ve added to the EasyPress family, the EasyPress Mini! It’s so stinkin’ cute! I thought the 6″ x 7″ size was cute but the Mini is even smaller and more adorable! (Why are small things so cute?) It’s the perfect companion to the ever growing family of EasyPress machines.

When I first saw it, my mind started racing with ideas of ways to use it, (the first of which I’m sharing with you today). 

The new mini is perfect for small and unique projects that previous EasyPresses maybe couldn’t accomplish (or that might have just been a little more challenging) like hats, shoes, shirt sleeves, cuffs and even stuffed animals! Like the EasyPress 2, the Mini offers an even heat plate (unlike a traditional iron that can vary in temperature by 200 degrees, crazy right?) and easy to use heat settings for effortless heat transfers. 

If you’ve known me for any amount of time, you know that I love giving gifts and a huge part of it is that I LOVE wrapping gifts. I think because my love language is receiving gifts, it’s also my way of showing my love. The adorable new EasyPress Mini is perfect for personalizing your ribbon for gifts!

This is a sponsored conversation written by me on behalf of Cricut. The opinions and text are all mine.
Post may contain affiliate links. This means if you buy the cool stuff I recommend, you still pay the same price, but I get a small commission. Everybody wins!

It’s a super fun way to add that little personal touch to your gifts. Not only can you add a fun sentiment, you can also use this technique in place of a gift tag as well! I’ve never been a fan of traditional gift tags, especially holiday ones because they usually clash with my wrapping paper and as a (self proclaimed) gift wrap aficionado, that just won’t fly for me. (It’s also a great way to add that “special” touch to gifts that come from the North Pole if you know what I mean 😉 )

Supplies

Start by designing your file in Cricut’s Design Space. Measure the height of your ribbon and make sure that your design fits before cutting. If you’d like to use any of my designs, HERE is my Design Space file.  

Once you are ready to cut, lay your iron on material shiny side down on your mat. I find it easiest to roll it on. Select the correct material (or if you’re using an Explore machine, set your dial) and don’t forget to mirror your project before cutting!

Then let your machine do it’s thang. 

Weed (or remove the negative space from) your design. I cut most of the designs several times so that I could have the sayings repeat on the ribbon but that’s totally up to you. I also like the look of it just being on the tails too. 

Using your weeding tool, remove all the little insides of the letters. Not gunna lie, this was a little time consuming, and I maaaaay have lost some (or all) of the dots for the i’s, but the final result was just as cute, so it’s all good. 

Now time for the fun part!

The new EasyPress Mini is a little different from previous EasyPresses. It only has three settings and no timer so you’ll want to check the Cricut Heat Guide to find out what setting to use for your project. It takes all of the guess work out of it! Because I was using glitter iron-on on a polyester ribbon, I used the medium heat setting on the EasyPress Mini for 25 seconds. It also told me to use constant movement and light pressure. 

The design is so ergonomic, it feels great in your hand!

The heat guide recommended a warm peel, so, while the project was still warm, I removed the carrier sheet and the results were perfect!

I had so much fun creating all these ribbons and can’t wait to use this technique on all of my future gift giving! 

I’m so excited to add the new EasyPress Mini to my crafting arsenal. I can’t wait to keep testing the limits of this mini but mighty little guy! Let me know if you have any questions or any ideas for new ways I can use it!

Seam tape – K-TEX

For gluing seams at home you will need: an iron, a sheet of paper, a wooden block, a tape for seams.

The tape has two sides: one is smoother and more glossy – it will stick when heated. The second is more matte and won’t stick. These are subtle differences, to be sure, you can first try on a small cut of tape and fabric.

The width of the bar should not be less than the width of the tape, but not too wide, so as not to spoil the properties of the membrane with an iron.Optimum bar width 2.5 – 3 cm.

We put a wooden block on the table. We place the fabric on top, bend the seam allowances to one side. Put the tape on top of the seam so that it completely covers both the seam and the seam allowance.

Put a sheet of paper on top of the tape to prevent the tape from sticking to the iron.
The iron should be at a medium temperature (usually a two-point iron setting).The length of time the iron is applied is the main point. It is better to underexpose than overexpose. if the tape is remelted, it will turn into a viscous, useless mass. It is advisable to try on scraps in advance so as not to spoil the finished product. You need to hold for about 10 seconds, strongly pressing the iron to the bar.
We removed the iron and remove the sheet of paper. If the sheet is not stuck to the tape, then everything is going well: the tape is attached right side up and it has not melted.

Now you need to carefully examine the seam, if the tape lies in bubbles, in some places leaves the fabric when the seam is folded, then this moment needs to be slightly modified.

Correctly glued tape looks like this: in all places it adheres tightly to the fabric, completely covers the seam and the seam allowance.
There are places in clothes where several seams converge at one point, which need to be glued. This area must be straightened and all allowances must be folded back so that the area of ​​intersection of the seams becomes flat.
Result of gluing the intersection of two seams.
How to glue curved seams. In order to place them flat on the bar, it is necessary to make cuts of the allowances, almost reaching the seam line.
To make it easier, you can pull the seam over the bar, as shown in this photo: part of the seam is under the bar, and we, pressing the bar to the table, stretch the free part of the fabric, cover the bar with a sheet of paper and iron.
For convenience, you can grasp the block with a sheet of paper, as shown in the photo, and walk a good corner or edge of the iron along all the irregularities of the seam.
Result of gluing the intersection of several seams.
Result of gluing a curved seam.

Shares Tape hypermarket Rostov-on-Don for Irons, ironing systems, steamers

All promotions on one site? Easily!

If you are on our web portal SkidkaOnline, it means that you are not used to overpaying for goods and you know what hot sales are.And thanks to us, unnecessary expenses will remain in the daaaaaalek past. After all, our resource contains almost all the fresh promotions and discounts of the famous hypermarket chain Lenta hypermarket in the city of Rostov-on-Don and other discounts of stores. By studying our site, you will be aware of all the promotional offers of your favorite chain of stores. At the same time, each actual online discount is in our field of vision every second – we monitor for you the discount market of the city of Rostov-on-Don non-stop!

How to find promotions in stores and what you need to know?

Everything is extremely simple – we drive into the line of your favorite search engine “all discounts online” or something like that.Voila! In the list you will immediately notice SkidkiOnline. On our resource, hypermarket Lenta hypermarket promotions are updated regularly, and you can find out about their beginning and end by looking at the product picture. The alarm clock, which is also located at the bottom of the picture, will remind you of how many days are left until the end of the sale. Don’t have time to look through all the promotions in supermarkets and hypermarkets in the city of Rostov-on-Don? Then use the search by product category! Do you want to know what is the peak of sales? Sort products by popularity!

Can I send you information about online discounts by e-mail? Of course!

Among other things, we will definitely send you a message that the start of this or that action of the city of Rostov-on-Don is coming soon – for this you need to subscribe to our mailing list.Make sure that our messages do not end up in “Spam”, because it will be a shame to lose such important and interesting information. Supermarket promotions fly by very quickly, have time to buy what you need!

Why we are not omnipotent

Recall that we are not a representative of the hypermarket Lenta hypermarket, but only accumulate information about promotional offers on our resource. The store also retains the right to change the conditions of the promotion, control the availability of goods, and so on. We only help you quickly find discounts and sales in your favorite hypermarket, save your time and, of course, money.Therefore, inform the administration of the network directly about all serious punctures in specific stores, since, unfortunately, we will not be able to influence the situation in any way.

Running for discounts!

Regularly browsing our site DiscountOnline, you will be the first to find out what product in the hypermarket Lenta hypermarket is selling at a discount today, and how many days the promotion will last. Here you can find out customer reviews, see the popularity of the product, like and share your find on social networks with your friends.Stop making rash purchases – arm yourself with useful knowledge and go for a productive shopping!

Author’s presentation “Timeline – Iron” prepared for an open lesson 5 classes

Timeline UTYUG

Completed by:

Kuzhim Larisa Ivanovna

The history of the iron.

Since ancient times, people have taken care of their clothes so that after washing it looks beautiful and neat.For these purposes, the iron was invented.

The first ironing device was a heavy flat stone. On the rock carvings of the ancient Aztecs, the ironing process is depicted as follows: clothes were spread on a flat surface, pressed down on top with a stone and left for a while under this press.

As early as the fourth century BC, the ancient Greeks invented a method of pleating their loose linen garments using a hot metal rod that resembled a rolling pin.

Two centuries later, the Romans knocked out wrinkles from their clothes with a metal hammer.

In Russia, ironed with a rolling pin. In different regions of Russia this ironing tool was called “rubel”, “pralnik”, “pranik”, “granchak”, “rib”, “rolling”.

In Russia, linen was also ironed with “barks” – glass balls, iron mugs filled with hot water.

An iron with burning coals inside appeared only in the middle of the 18th century.Before that, clothes were ironed with a tool very similar to a large frying pan. The closest predecessor to the modern iron was the charcoal brazier.

Irons with replaceable handle Over time, they began to use two irons: while one was heating on the stove, the other was ironed.

The simplest irons – heating . Before use, the cast iron monoliths were heated in a furnace. Fabric irons weighed differently – from one to 10 kilograms

Cast iron , heated over an open fire or in a hot oven.

They appeared in the 18th century and were produced in our country even in the 60s. XX century: despite the fact that the electric iron was invented a long time ago.

This happened

because

in many houses

sockets were not provided yet.

A cast iron iron took a very long time to warm up – at least 30 minutes, and it was impossible to take it hot without a tack. While one was ironing, the second base was heated, so that the ironing process was noticeably accelerated.

The Pereslavl-Zalesskaya grandmother said: “I didn’t want to get married to a strange village, but my mother persuaded:” Go, daughter, there is a coal iron in that house! ”

This clear sign of prosperity and well-being was placed in a prominent place next to the samovar for everyone to watch.

Charcoal Irons At the end of the 19th century, the Germans invented a multifunctional charcoal iron. He could iron linen, bake waffles, chop nuts, crush garlic, and it could also be used as a mousetrap .

Irons-boxes , where the heated bar was put.

Gas irons were warmed up by burning gas. A metal tube was inserted into the body of such an iron, connected at the other end to a gas cylinder, and a pump was located on the iron cover.

But such irons were dangerous: through their fault, gas leaks often occurred – with all the ensuing consequences:

explosions,

fires

and victims.

PROFESSIONAL IRONS PORTNO The tailor’s iron must be heavy, not less than a kilogram. Tailors usually had several irons of different sizes and weights. There were irons and up to 12 kilograms.

At the beginning of the 20th century, a safer alcohol iron than the gas one, , became more and more popular.

Such an iron was too expensive.

These are sleeve irons.

Irons for hard-to-reach places – in the area of ​​the sleeve, shoulder, armpits

HAT IRONS

GLOVE

Heaters for irons were such devices.

Travel Irons

The first electric irons

The birthday of the electric iron can be considered June 6, 1882. It was on this day that the American Henry Seeley patented the electric iron he invented.

  • 60-70s
  • 60-70s
  • 80s
  • 80s

There are no irons now! And with a steam humidifier, and on a Teflon or ceramic sole, and without wires – so as not to twist and lead to a fire, and with vertical steaming – even the curtains, without removing the iron.

without wires – so as not to twist and lead to a fire, and with vertical steaming – at least the curtains, without removing, iron.

A recently appeared even light

In the town of Pereslavl-Zalessky, 100 km from Moscow, by collector Andrey Vorobyov on June 29, 2002. the Iron Museum was created, the entrance to which is guarded by the fabulous Grandmother-Yaga.

By the way, the Iron Festival is held in the Museum several times a year.These days, everyone can try any iron they like in action, since all the exhibits in the unique collection are in working order. But every day here you can touch them all, open them, look inside, click the latches, in a word, touch the history …

But the history of the iron is far from over. After all, before gaining a modern look and becoming an ultra-modern device – light, ergonomic, efficient and safe, the iron has come a long way of development. And at all times this “ironing equipment” was a faithful companion of man, making life much more comfortable.And what kind of iron will be in the future – time will tell. But I can clearly say that it would be nice to have irons on the remote control.

Material from the Internet was used in the work. Thank you for your attention!

Plywood edging tape | WOOD-Master Magazine

Thanks to its flat surface and stability in work, plywood can become a joiner’s best friend. However, its edges do not look very attractive. Mask the inner layers of the plywood with edging tape.

 

Finishing the ribs of parts with adhesive-backed edging tape made from veneer or polyester requires only a steam iron and simple cutting tools to do the job perfectly. Reliable, durable, heat activated edging film is made from various tree species and polyester plastic in black, gray, white and almond colors. The width of the tape can be selected as desired. Typically 18 to 45 mm, this is sufficient to cover the edges of plywood and laminated panels with a slight overlap in thickness on both sides.
In addition to an iron, you will need a tool to cut the edges of the edging tape flush with the plywood surfaces. You can use a 24mm chisel, but the tape cutter will speed up your work a lot.
Other tools include a working knife with a well-sharpened blade, an abrasive sponge, and a round screwdriver to use as a smoothing tool. It can be replaced with a piece of wood with rounded edges.

At first
smooth tape

Get Started
with leveling and dust removal from the edge
plywood.If you’re going to cover
several edges on the part, first
paste over less visible edges to
hide tape edges on adjacent surfaces
edges. Install the heating regulator
iron on cotton fabric
and heat the iron. Cut off with scissors
a strip of edging tape, the width of which
about 3 mm, and the length is 25 mm longer
the surface of the edge to be pasted. After measuring each strip of tape,
check if there are any splice joints on it, with which the short
veneer strips are turned into long
rolls of edging tape.Splice joints
tapes can be invisible thanks to
the structure of fibers around the joint. But if
you are going to apply the stain,
the coating can cause a reaction in the wood.
In this case, cut the strips so that
to eliminate splice joints.
For
gluing rounded surfaces
center the edging tape
edge so that it overlaps
distance 12 mm from each end. Heated
press the tape firmly to the surface with an iron
edges of the part from one edge.Do
it’s slow enough to evenly
melt the glue, but avoid it
overheating and squeezing out from under the edge
ribbons. If the glue is not heated enough,
this can lead to the fact that the edging
the tape will subsequently lag behind
part edges.
Bye
hot glue, tool for
smoothing, walk along those
places where the edging tape touches
with external or laminated
surfaces of the part.Do not press
too much, otherwise you can chip
the edges of the tape.
Please wait
10 minutes for the surface to cool. Then
set the iron at an angle and
press them on the tape opposite each
the edge of the plywood edge to help it
adhere to facial surfaces
details. Press gently with the iron again,
to avoid chipping the edge
tape, let the glue cool and harden in
within 10 minutes before cutting off
surplus.

Cut
surplus

Cut off
excess tape on both sides of the part
special tool (see.photo on the right),
flush with the ends of the part at an angle of 90 °.
Where the edges converge under different
corners, cut them off with a knife. At
this leaves a slight edge on
edges to be sanded. Take a look
to the location of the fiber direction
at the edges of the part to be pasted before
how to cut off excess tape flush with
surface. If the fibers are directed
down, then cut from right to left,
and if up – from left to right. Otherwise
there is a risk of splitting the edges of the edge
tape and cut the corners of the part, since
the fibers will bend the cutting tool
down to the surface of the plywood.Put
cutter on plywood and cut
tape one edge at a time.
Double-sided knife that cuts
tape on both sides at the same time,
can bury itself in the edges of a tree if one
the side of the knife cuts against the direction
fibers. Leave the double-sided knife
for polyester-based edgebands,
and on veneer tape use
unilateral.

Along
all edges and ends of the cut tape
sand the surface gently with your hands
plywood to remove all irregularities
and burrs remaining on the surface.While sanding plywood surfaces
press the tape against the edge of the part.
Avoid tilting the abrasive pad towards
corners of the glued surface, otherwise
you can cut thin strips or veneers.
For unpaired corners such as grooves
shelves, use a narrow bar
and a sticky skin.

TIP
MASTERS

Pasting
circles

For
for gluing round parts such as
round table follow above
instructions, just cut off first
the tape is 50 mm longer than the perimeter
circles.Then stick the tape
so that, covering the whole circle,
the last section of the tape overlapped
on the first section of glue for a length of about 50 mm. Then with a knife, cut perpendicularly
part surface both edge layers
tape as shown in the photo on the left. Delete
cut pieces. Then heat up,
join and glue the edges flush
together.

Iron REDMOND RI-C285: characteristics, description, instructions

REDMOND Smart Home brand store in the Oka shopping center GM Lenta on Oboronnaya

Address:

St. Petersburg, pos.Telman, 2 B, pom. 43 a

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in MEGAMAG shopping mall

Address:

Rostov-on-Don, st.Poymennaya, 1

Phone: 8 (800) 200-77-21

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the Iceberg shopping center

Address:

Samara, st.Dachnaya, house 2

Phone: 8 (800) 200-77-21

Mode
work: Daily from 9.00 to 21.00

REDMOND Smart Home brand store in Kapital shopping and entertainment complex

Address:

Togliatti, st.Dzerzhinsky, house 21

Phone: 8-800-200-77-21

Mode
work: Daily from 10.00 to 21.00

REDMOND Smart Home brand store in the shopping and entertainment center “MoreMall”

Address:

Sochi, st.Novaya Zarya, 7

Phone: 8 (800) 200-77-21

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in Avenue shopping mall

Address:

St. Petersburg, Vyborgskoe sh., 15, letter A

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the Karat shopping center

Address:

Moscow, Moscow region, Reutov, st.Lenin, 1A

Phone: 8 (495) 909-08-20.

Mode
work: Daily from 10.00 to 21.00

REDMOND Smart Home brand store in TMK “Mega Grinn”

Address:

Oryol, Kromskoe highway, d.4

Phone: 8 (800) 200-77-21

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the Media Plaza shopping center

Address:

Krasnodar, st.Stasova 178/2

Phone: 8 (800) 200-77-21

Mode
work: Daily from 10.00 to 21.00

REDMOND Smart Home brand store in the Zanevsky Cascade shopping mall

Address:

St. Petersburg, Zanevsky pr., house 71

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in Versal shopping center

Address:

Novosibirsk, pl.named after Karl Marx, 3

Phone: 8-800-200-77-21

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in RIO shopping mall

Address:

St. Petersburg, st.Fucik, 2

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the Tandem shopping center

Address:

Kazan, Ibragimova avenue, 56

Phone: 8-800-200-77-21

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the Tri Kota shopping mall

Address:

Astrakhan, st.Minusinskaya, 8

Phone: 8 (800) 200-77-21

Mode
work: Daily from 9.00 to 20.00

REDMOND Smart Home brand store in TC “Forum”

Address:

Saratov, st.Tankistov, house 1

Phone: 8-800-200-77-21

Mode
work: Daily from 10.00 to 21.00

REDMOND Smart Home brand store in the RIO shopping center

Address:

Moscow, Bolshaya Cheremushkinskaya d.1

Phone: 8 (495) 909-08-20

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in Afimall City shopping mall

Address:

Moscow, Presnenskaya emb.d. 2

Phone: 8 (495) 909-08-20.

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the Vesna shopping center

Address:

Moscow, Moscow, Altufevskoe highway, 1st kilometer, vl3 s1

Phone: 8 (495) 909-08-20.

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in MEGA Parnas shopping mall

Address:

St. Petersburg, Ring Road, 117th kilometer, outer ring, 1

Phone: 8 (812) 679-99-02

Mode
work: Daily from 9.00 to 22.00

REDMOND Smart Home brand store in the Lotos Plaza shopping mall

Address:

Petrozavodsk, pr.Lesnoy, 47 lit. A

Phone: 8 (800) 200 77 21

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the Mongora shopping center

Address:

Syzran, pr.50 years of October, house 54G

Phone: 8-800-200-77-21

Mode
work: Daily from 10.00 to 21.00

REDMOND Smart Home brand store in the Titan-Arena shopping mall

Address:

Arkhangelsk, st.Voskresenskaya, 20

Phone: +7 (800) 2007721

Mode
work: Daily from 10.00 to 21.00

Brand store REDMOND Smart Home in GM “Okay”

Address:

Murmansk, pr.Lenin, 34

Phone: 8 (800) 200-77-21

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the Tropa shopping center

Address:

Moscow, Profsoyuznaya st., vl. 118

Phone: 8 (495) 909-08-20.

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the “GREENN” Megacomplex

Address:

Belgorod, Bogdan Khmelnitsky avenue, d.137T

Phone: 8 (800) 200-77-21

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in MEGA Adygea-Kuban

Address:

Krasnodar, Turgenevskoe highway, 27

Phone: 8 (800) 200-77-21

Mode
work: Daily from 8:30 to 22:00

REDMOND Smart Home brand store in Balkania Nova shopping mall

Address:

St. Petersburg, Balkan square, d.5 Yu

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the City-Park Grad shopping mall

Address:

Voronezh, Voronezh region, Ramonsky district, Solnechny settlement, st. Parkovaya, 3

Phone: 8 (800) 200-77-21

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the Piknik shopping center

Address:

Moscow, Moscow region, Odintsovo urban district, working settlement Novoivanovskoe, Western street, p.4

Phone: 8 (495) 909-08-20.

Mode
work: Daily from 10.00 to 21.00

REDMOND Smart Home brand store in the Azovskiy shopping and entertainment center

Address:

Moscow, st.Azovskaya 24, bldg. 3

Phone: 8 (495) 909-08-20

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in TK Akademichesky

Address:

St. Petersburg, Grazhdansky prospect, 41, letter A

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in GM “Magnit”

Address:

Stavropol, st.Dovatortsev, 64

Phone: 8-800-200-77-21

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in 5 LAKES shopping mall

Address:

St. Petersburg, st.Dolgoozernaya, 14, building 2

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the “Magnit” shopping center

Address:

Salavat, st.Gubkina, house 3

Phone: 8-800-200-77-21

Mode
work: Daily from 10.00 to 22.00

Brand store REDMOND Smart Home in GM “Okay”

Address:

St. Petersburg, Bogatyrsky pr., house 42

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in GM “Magnit”

Address:

Volzhsky, st.Loginova, 2B

Phone: 8 (800) 200-77-21

Mode
work: Daily from 10.00 to 21.00

Brand store REDMOND Smart Home in GM “Okay”

Address:

Nizhny Novgorod, st.Woodworking, house 2

Phone: 8 (800) 200-77-21

Mode
work: Daily from 10.00 to 22.00

Brand store REDMOND Smart Home in GM “Okay”

Address:

Yekaterinburg, st.Babushkina, 2a

Phone: 8-800-200-77-21

Mode
work: Daily from 10.00 to 22.00

Brand store REDMOND Smart Home in GM “Okay”

Address:

Krasnoyarsk, Siberian per.d.5a

Phone: 8-800-200-77-21

Mode
work: Daily from 10.00 to 22.00

Brand store REDMOND Smart Home in GM “Okay” Putilkovo

Address:

Moscow, Moscow region, d.Putilkovo, 71km MKAD, 1

Phone: 8 (495) 909-08-20.

Mode
work: Daily from 10.00 to 22.00

Brand store REDMOND Smart Home in GM “Okay”

Address:

St. Petersburg, Leningrad region, Lomonosovsky district, Villoz urban settlement, Tallinskoe highway, 27

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the Gorod shopping center

Address:

Tomsk, st.Herzen 61/1

Phone: 8-800-200-77-21

Mode
work: Daily from 10.00 to 20.00

REDMOND Smart Home brand store in the Emerald City shopping center

Address:

Tomsk, Ave.Komsomolsky, 13 B

Phone: 8-800-200-77-21

Mode
work: Daily from 10.00 to 22.00

REDMOND SMART Home brand store in Smile shopping center

Address:

St. Petersburg, pr.Bolshevikov house 27, letter A

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 21.00

REDMOND Smart Home brand store in the South Pole shopping mall

Address:

St. Petersburg, st.Prague 48/50 letter A

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 21.00

REDMOND Smart Home brand store in the shopping center “Raduga”

Address:

St. Petersburg, pr.Cosmonauts, 14, lit. A

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

Brand store REDMOND Smart Home in GM “Okay”

Address:

St. Petersburg, Bogatyrsky pr.13A

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store Maxi shopping center (Luganskaya street, 53/2)

Address:

Kirov, st.Lugansk, 53/2, Kirov, Kirov region

Phone: +7 (8332) 253-777 ext. 1

Mode
work: Daily from 10.00 to 21.00

Brand store REDMOND Smart Home in GM “Auchan”

Address:

Izhevsk, st.Lenin, 136

Phone: 8 (800) 200-77-21

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in Ulyanka shopping mall

Address:

St. Petersburg, Prospect Veterans, 101

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

Brand store REDMOND Smart Home in GM “Okay”

Address:

St. Petersburg, Moskovsky pr.d. 137, letter A

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the Okhta Mall shopping center

Address:

St. Petersburg, st.Brantovskaya road, 3

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the village of Murino (Privokzalnaya square, building 1-A, building 1)

Address:

St. Petersburg, p.Murino, Privokzalnaya square, building 1-A, building 1

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store on Sadovaya 42

Address:

St. Petersburg, st.Sadovaya, 42 lit. A

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in Planernaya TPU

Address:

Moscow, Planernaya st., 7

Phone: 8 (495) 909-08-20.

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the Moskvorechye shopping mall

Address:

Moscow, Kashirskoe highway, d.26

Phone: 8 (495) 909-08-20.

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the VIVA shopping center

Address:

Moscow, st.Polyany, 8

Phone: 8 (495) 909-08-20.

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in Pilot shopping and entertainment center

Address:

St. Petersburg, g.Gatchina, General Knysh st., 2a

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 21.00

REDMOND Smart Home brand store in Aquarelle shopping center

Address:

Volgograd, Universitetsky prospect, 107

Phone: 8 (800) 200-77-21

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the shopping center “Kirovsky Department Store”

Address:

St. Petersburg, Stachek square, d.9 lit A

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the Continent shopping mall

Address:

Saint Petersburg, Saint Petersburg Continent pr.Stachek, 99

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

Brand store REDMOND Smart Home in GM “Okay”

Address:

Krasnodar, st.Minskaya, 120/8, letter A

Phone: 8 (800) 200-77-21

Mode
work: Daily from 10.00 to 22.00

Brand store REDMOND Smart Home in GM “Okay”

Address:

Rostov-on-Don, bul.Komarova, no. 24 letter A

Phone: 8 (800) 200-77-21

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the Ultra shopping and entertainment center

Address:

Ufa, st.Bakalinskaya, 27

Phone: 8 (800) 200-77-21

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in Victoria Plaza shopping center

Address:

Ryazan, avenue Pervomaisky, d.70, building 1

Phone: 8-800-200-77-21

Mode
work: Daily from 10.00 to 22.00

Brand store REDMOND Smart Home TRK Ligov

Address:

St. Petersburg, St. Petersburg Ligovsky pr., d. 153, lit. A

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in Vyhodnoy shopping center

Address:

Moscow, Moscow region, Lyubertsy, Oktyabrsky pr-kt, d 112

Phone: 8 (495) 909-08-20

Mode
work: Daily from 10.00 to 22.00

Brand store REDMOND Smart Home in GM “Okay”

Address:

Yekaterinburg, st.Academician Schwartz, p. 15

Phone: 8-800-200-77-21

Mode
work: Daily from 10.00 to 22.00

Brand store REDMOND Smart Home in GM “Okay”

Address:

Rostov-on-Don, st.Malinovsky, No. 23d

Phone: 8-800-200-77-21

Mode
work: Daily from 10.00 to 22.00

Brand store REDMOND Smart Home in GM “Okay” (SEC “Planeta”)

Address:

Ufa, st.Enthusiasts, d 20

Phone: 8-800-200-77-21

Mode
work: Daily from 10.00 to 22.00

Brand store REDMOND Smart Home in GM “OK”

Address:

Tyumen, Shirotnaya 199

Phone: 8-800-200-77-21

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the Seventh Heaven shopping center

Address:

Nizhny Novgorod, st.Betancourt, 1,

Phone: 8-800-200-77-21

Mode
work: Daily from 10.00 to 22.00

Brand store REDMOND Smart Home in GM “OK”

Address:

Voronezh, st.Shishkova, 72

Phone: 8 (800) 200-77-21

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in Maxi City shopping center

Address:

Moscow, g.Balashikha, Entuziastov highway, 80

Phone: 8 (495) 909-08-20

Mode
work: Daily from 10.00 to 21.00

REDMOND Smart Home brand store GLOBUS shopping center (Vorovskogo st., 135)

Address:

, st.Vorovskogo 135, Kirov, Kirov region

Phone: +7 (8332) 253-777 ext. 2

Mode
work: Daily from 9.00 to 21.00

REDMOND Smart Home brand store in the Raikin Plaza shopping center

Address:

Moscow, st.Sheremetyevskaya, 6, building 1

Phone: 8 (495) 909-08-20.

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the Park House shopping center

Address:

Yekaterinburg, st.Sulimova, 50

Phone: 8-800-200-77-21

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the shopping center “Kubus”

Address:

St. Petersburg, g.Gatchina, Pushkinskoe highway, 15

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 21.00

REDMOND Smart Home brand store in the shopping center “Manezh”

Address:

Tomsk, l.Bering, 10

Phone: 8-800-200-77-21

Mode
work: Daily from 10.00 to 21.00

REDMOND Smart Home brand store in the Marmelad shopping and entertainment center

Address:

Vologda, Poshekhonskoe highway, d.22

Phone: 8 (800) 200-77-21

Mode
work: Daily from 10.00 to 21.00

REDMOND Smart Home brand store in the Metromarket shopping center

Address:

Moscow, 3rd Krutitsky per., house 18

Phone: 8 (495) 909-08-20.

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in June shopping center

Address:

Moscow, g.Krasnogorsk Moscow region. st. Znamenskaya, 5

Phone: 8 (495) 909-08-20.

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the Karusel hypermarket

Address:

St. Petersburg, g.Sosnovy Bor, Krasnykh Fortov st., 26

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in the Grand Canyon shopping mall

Address:

St. Petersburg, Engels, d.154, lit. A

Phone: 8 (812) 679-99-02

Mode
work: Daily from 10.00 to 22.00

REDMOND Smart Home brand store in Planeta shopping center

Mode
work: Daily from 10.00 to 22.00

The Ministry of Industry and Trade reported that they found foreign irons with wiretaps

https://ria.ru/20200930/proslushka-1577980030.html

The Ministry of Industry and Trade reported that they found foreign irons with wiretaps

The Ministry of Industry and Trade reported that they found foreign irons with wiretap – RIA Novosti, 01.10.2020

The Ministry of Industry and Trade reported that they found foreign irons with wiretaps

Director of the Department of the Radio-Electronic Industry of the Ministry of Industry and Trade of Russia Vasily Shpak told reporters that foreign-made irons were found in Russia … RIA Novosti, 01.10.2020

2020-09-30T09: 45

2020-09-30T09: 45

2020-10-01T13: 45

Ministry of Industry and Trade of the Russian Federation (Ministry of Industry and Trade of Russia)

Security

/ html / head / meta [@ name = ‘og: title’ ] / @ content

/ html / head / meta [@ name = ‘og: description’] / @ content

https: // cdn23.img.ria.ru/images/07e4/09/1e/1577986339_0:239:3072:1967_1920x0_80_0_0_ae4f1b017925f3849559dbe58f56ed2e.jpg

YALTA, September 30 – RIA Novosti. Vasily Shpak, director of the radio-electronic industry department of the Ministry of Industry and Trade of Russia, told reporters that foreign-made irons with built-in wiretapping were found in Russia. “There are bookmarks. We saw a couple of irons with microphones. An ordinary iron. then throw, you need some kind of (communication method.- Approx. ed.) “, – said Shpak. According to him, bookmarks in electrical engineering are not fiction.

https://ria.ru/20200930/iphone-1577979657.html

RIA Novosti

[email protected]

7 495 645-6601

FSUE MIA “Russia Today”

https: //xn--c1acbl2abdlkab1og.xn--p1ai/awards/

2020

RIA Novosti

[email protected]

7 495 645-6601

FSUE MIA “Russia Today”

https: // xn – c1acbl2abdlkab1og.xn – p1ai / awards /

News

ru-RU

https://ria.ru/docs/about/copyright.html

https: //xn--c1acbl2abdlkab1og.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *