Id48 transponder programmer: Proficient, Automatic id48 transponder programmer for Vehicles Inspiring Driving Experience

Collect data from ignition switch, used for copy 48 transponder by OBDII.

• Bonus points can be accumulated by using VVDI remote
  You can Buy calculation tokens as well ($8 for one token)
• Provide your supplier device serial number, your name, phone number & address.

3) Car model list

Support all car types with 48 transponder without OBDII, only add spare key.

Support list: (parts of example)

2002-2017 VAG 48 transponder cloning, Honda, Buick, Cadillac, Fiat, Volvo, Greatwall, Zhonghua.

4) Nice features:

96 bit copy 48 support normal 48 transponder in the market (no need special transponder)
96 bit copy 48 support add spare key no limited quantity, support as the vehicle all key position.
96 bit copy 48 cannot support keyless go system, cannot support MQB platform.

3. 96 bit ID48 clone with VVDI Key tool

All users who have ID48 96 bit authorization in VVDI2 can combinate vvdi Key tool + VVDI2 and use Keytool to clone 48 as well since April, 1st, 2018.

1) 48 96bit Cloning needs:

Ordinary ID48 chip without OBDII

Activation price $250 (Additional gift 1500 bonus points. Cloning costs 100 bonus points each time

• Bonus points can be accumulated by using VVDI Remote (From Xhorse normal-wire remote you get 25 bonus points. From Xhorse-wireless remote you get 40 bonus points.)
• You can buy Calculation tokens as well, price for token is $8.

2) Price:

1) VVDI key tool + 96bit 48 clone license $250 + Bonus points / tokens ($8 each)+ ID48 chip cost

2) VVDI2 +VVDI key tool + 96bit 48 clone $250 + Bonus points/tokens+ ID48 chip.

3) VVDI KEY TOOL 96bit 48 online clone model list

* VVDI2/VVDI KEY TOOL Bonus Points Reward System

What the Bonus Points Reward System is?

The bonus point system is meant to reward you with points each time you use the Xhorse remotes.

Once you accumulate enough points they can be exchanged for freebies or money of software authorizations for other Xhorse programmers etc.

4. Keydiy KD-X2 ID48 96 bit copy:

48 chip clone is not yet activated. KeyDIY factory is moving their online server. They will do an update in May, after the update, all KD X-2 can activate 96 bit 48 clone functions freely by the update 96 bit 48 clone functions cost tokens. You can gain tokens by generating remotes using KD X-2 . Generate 5 remotes, gain one tokens. They have not made the decision yet on tokens or how much tokens will be for 96 bit id48.

(Keep updating this part…)

5. Keyline and Slica:

Keyline use no tokens but the gkm chips are £15.

Silca: the ID49 cloning price will be about 1000 euro for package, you need M-Box+ M-Snoop, but it uses no tokens and silca 48 currently around £12 for the id48 transponder chip.

both above clone in just a few minutes and token free .

In conclusion:

Handy baby now use tokens for 96 bit as well which are a lot dearer.

VVDI2/vvdi key tool you need tokens for id48 96 bit cloning , tokens are $8 each plus cost of chip.

Keyline and slica use no tokens but cost more on chips.

At the end of the day its the speed to clone , the cost to clone and the chip price that will dictate the best tool , the token and chip prices may make silca and keyline competitive as token free and very fast and reliable , time will tell.

The cost of the machine is not a factor , the cost of consumables is tokens and chips is far more important , as a decent saving to produce the chip will soon negate the cost of the kit , once all consumable prices are known then it becomes easier to decide on best machine.

For now VVDI key tool is better to chip copy, kd-x2 precode many remote.

www.obdii365.com

Programer –

UPA USB yra vienas geriausių šiuo metu parduodamų programatorių. Jis suderinamas didelia EEPROM mikroschemų įvairove. Visi adapteriai reikalingi pasijungi programuojama mikroschemą prie programatoriaus yra komplekte

STMicroelectronics ST62*:
ST6240, ST6245, ST6249
NSC CR16*: CR16HCS5(9), CR16MCS5(9), CR16MES5(9), CR16MFS5(9), CR16MCT5/9, CR16HCT5/9 
Motorola HC05*: MC68HC05B6, MC68HC05B8, MC68HC05B16, MC68HC705B16, MC68HC05B32, MC68HC05E6, MC68HC705E6, MC68HC05h22, MC68HC05L28, MC68HC05P3, MC68HC705P3*,MC68HC05X16, MC68HC05X32
Motorola HC08*: MC68HC08AS20, MC68HC08AS32, MC68HC08AS60, MC68HC08AZ32, MC68HC(9)08AZ32A, MC68HC908AZ60, MC68HC908AZ60A
Motorola HC11*:  MC68HC11A8, MC68HC11E9, MC68HC11EA9, MC68HC11E20, MC68HC11F1, MC68HC11K4, MC68HC11KA2, MC68HC11KA4, MC68HC11KG4, MC68HC11KS2, MC68HC11KS8, MC68HC11L6, MC68HC11P2, MC68HC11PA8, MC68HC11PH8
Motorola HC12*: MC68HC912B32, MC68HC912BE32, MC68HC912D60, MC68HC912D60A, MC68HC912DC128A, MC68HC912DG128, MC68HC912DG128A
Motorola HCS12*: MC9S12D64, MC9S12A128, MC9S12DG128, MC9S12DG256, MC9S12h228, MC9S12h356
Atmel 8051 Architecture: AT89S51, AT89S52, AT89S53, AT89S8252, AT89S8253
Atmel AVR 8-Bit Risk: AT90S1200, AT90S2313, AT90S2323, AT90S2333, AT90S2343, AT90S4433, AT90S4434, AT90S8515, AT90S8535, ATmega8, ATmega16, ATmega161, ATmega162,  ATmega163, ATmega323, ATmega64, ATmega103,  ATmega128, ATtiny12, ATtiny15, ATtiny2313
Microchip PIC12: PIC12F508, PIC12F509, PIC12F629, PIC12F675
Microchip PIC16: PIC16F627(A), PIC16F628(A), PIC16F648A, PIC16F72, PIC16F73,  PIC16F74, PIC16F76, PIC16F77, PIC16F818, PIC16F819, PIC16F83, PIC16F84(A), PIC16F870, PIC16F871, PIC16F872, PIC16F873(A), PIC16F874(A), PIC16F876(A), PIC16F877(A)
EEPROMs I2C: 24C01, 24C02, 24C04, 24C08, 24C16, 24C32, 24C64, 24C65, 24C128, 24C256, 24C512, 85C72, 85C82, 85C92, BAW574252, GRM-003, GRM-004, GRM-005, KKZ-06F, MCM2814, PCA8581, PCF8581, PCF8582, PCF8594, PCF8598, PCF85102, PCF85116, SDA2516, SDA2526, SDA2546, X24C00, X24C01
EEPROMs Microwire: 7002, 93C06, 93C14, 93C46, 93C56, 93C57, 93C66, 93C76, 93C86, 93S46, 93S56, 93S66, GRN-001, GRO-002, KKZ-01, S220, S2914, ST61907, XLS93C46
EEPROMs SPI: M35080, 25C010, 25C020, 25C040, 25C080, 25C128, 25C160, 25C256, 25C320, 25C640, M25P05, M25P10, M25P20, M25P40, M25P80, ST95010, ST95020, ST95040, ST95080, ST95160, ST95320, ST95640, ST95P02, ST95P04, ST95P08, X5043, X5045
EEPROMs Miscellaneous: CXK1011, CXK1012, CXK1013, M6M80011, M6M80021, M6M80041, SDE2506, TC89101, TC89102
*EEPROM Only

NEC . .uDP780828A  uDP780948   uDP780949 uDP780973  uDP780974

TMS…TMS370CX02 TMS370CX32 TMS370CX36 TMS370CX42 TMS370CX56 TMS370CX56 TMS370CX56 78K0/HC912

         TMS370CX58 TMS370CX58 78K0/HC912  TMS375C006

Auto key programmer, key chip (Remote maker, key programmer 96bit ID48 Transponder Copy) KD X2, price 6960 UAH

KEYDIY KD-X2 with the function of copying transponders id48 96bit.

KEYDIY KD-X2 is the latest device that includes the functions of generating keys, working with transponders and unlocking used keys, there is also a frequency counter and

antenna pumping detector.

KEYDIY KD-X2 Description

1. Power supply: 2600mAh lithium battery; Charge method: USB 5V / 1A
2.0.91inch OLED display.
3. Bluetooth BLE4.0 inside, work with mobile KD app by bluetooth connection
4. Work with a PC via USB-B connector, work with android via OTG cable
5. Three function buttons on the device: chip identification, remote control identification, frequency counter
6. Regular free updates
7. Basic functions:
1) Wired remote control generation.
2) Radio generation of the remote control.
3) Generation of garage remotes.
4) Subsequently release of keys.
5) frequency counter.
6) IR detector.
7) Copying cards.
8) Copying fixed code
9) Online copying of HCS consoles.
10) Onlan copying of chips (96 bit 48chip, 46chip, 4Dchip, Toyota chip etc.)
11) Generation of transponders.
12) Transponder editor.
13) Chip simulation.
14) Ignition antenna pump detector
15) Copy of key information.
16) Additional features will be added during the upgrade process.
17) free activation of copying id48 96 bit (at the moment the function is not active yet)

Important Notes:

1. The password from the device for connecting via BLUETOOTH “keydiy”
2. The function of copying id48 96bit (at the moment the function is not yet active) there are tokens (but the function itself is open for free, for other devices the function is opened for
additional fee + tokens ). You can get a free token by registering 5 keys using KD-X2 or purchase for money.
3. We are representatives of keydiy in Ukraine and always have a wide range of products for B and NB keys series
4. The device supports Bluetooth operation with iPhone & Android phones, for Android you can also connect the device via OTG cable. Working with a PC is also supported by
, but the functions of working with transponders are available so far only on the phone.

Chips (transponders) for programming auto keys here

Megamos ID-48 transponder

New.

Keys, screwdrivers, accessories on the Au.ru Internet auction

Advanced Code Evo key programmer is the maximum possibilities today for copying transponders of cars, motorcycles, intercoms, authorization systems.

This price includes the following packages:

Package 1 The program allows copying Texas Crypto 4D transponders (60, 61, 62, 63, 64, 65, 66, 67, 68, 70) plus Texas Crypto II TX-6F to chips TPX2 and ADX (rewritable)

Package 3 The program allows copying chips Philips Crypto 41 (Nissan), 42/44 (Ford, VAG), 44 (Mitsubishi), 45 (Pegeot).Package 4 Chip preparation Philips Crypto 40 (Chery, Opel, Samand), 41 (Nissan), 42 (Ford, VAG), 44 (Mitsubishi), 45 (Peugeot).

Preparing Philips Crypto 2 ID 46 (PCF 7946/7947) transponders for more than 200 models.

Preparing Megamos ID 48 transponders for Chevrolet, Daewoo, Audi (TP25), Seat (TP22), Skoda (TP24), VW (TP23) (additional option to unlock a prepared transponder).

Temic ID 8C transponder preparation Ford, Mazda, Proton (Transponder generation with package 8 only).

Prepare Texas Crypto 4D transponders (60/61/62/63/64/65/66/67/68/69/70). Preparing transponders for ABRITUS72 programmer (Mercedes Ml / BMW).

Procedures for manual programming of Europe remotes. Manual programming procedures for USA consoles. Europe / America consoles synchronization procedures.

Information about the location of the diagnostic connectors. Information about the location of the immobilizer units. Information about cables and dongles for AD100pro / MVP Pro / AD100 Truck equipment.

Package 5 Hyundai and Kia Allows you to save the base for 4D transponders on your computer, and when programming the keys, do not use the Internet, but exclusively the saved base on your own computer.

Programming and preparation of the transponder.

Programming the original card key. Pin code calculation. RK60-Programming for the KEYLINE remote control.

Package 6 Copy Philips Crypto 2 ID46 transponders to TK-60 / TPX3 / TPX4 Glass / TPX4 Carbon transponders (full access activated without buying additional tokens).

Package 8 Copy and prepare Temic crypto 8C transponders (Ford, Mazda, Proton) Copy ID 48 Chevrolet / Daewoo / Kia / Pontiac Package 11 Copy Texas Crypto II Toyota, G 80-bit PG.1: 36, 56, 96 PG .1: 37, 57, 97

Possibility of programming on two different transponders: – Possibility of writing to transponder LKP-02 (also supports 4C and 4D) –

Possibility of writing to transponder CN5 (also supports 4D) – These transponders are rewritable Additional Information: – no internet connection required

Supported models with 80-bit Toyota “G” transponder: Camry, Corolla, RAV4, Yaris, Venza, Auris, Avensis, 4-Runner, FJ Cruiser, Hiace, Highlander, Mark-X , Prius-C, Sequoia, Sienna, Tacoma, Toyota GT86, Tundra.

Key programming for vehicles of the “VAG” group

Which cars are included in the VAG group:

These are cars that are produced by the concern Wolkswagen AG, specifically Audi, Seat, Wolkswagen, Skoda, Bentley, Lamborghini, etc. Everything that we describe in this article will be applicable for all brands of this group of cars. For ease of maintenance and diagnostic measures, VAG has developed a single standard and protocol for the entire range of vehicles.

IMMO systems in these cars have several generations and years which will be indicated as approximate, i.e.because the transitions from generation to generation were gradual.

In order to program the key, you need a PIN from the immobilizer of this car.

Car generation from 1992-2000

All information about car keys of these years is in a separate block called immo-box. In these systems, the transponder is mainly used – ID13 (It has analogues, for example T5). Also used ID33, ID42, ID48. This generation of IMMO allows you to make a clone of a key by copying information from an already programmed key.If all keys are lost, then you can add a new key to the immobilizer memory, but for this you need a PIN-Code. To do this, you will need a car key programmer capable of pulling out the pin code and registering the keys. If you do not have this opportunity, then you can safely turn off the immo on cars of these years. Having a PIN-CODE, you can add a code using the VAG COM or Vasya-Diagnostic programs by connecting to the diagnostic connector with the VAG-COM adapter.

From 2000-2003

Information is stored in the dashboard here.Transponder used – ID48. Unlike ID13, it is not cloned. So all that remains is to add an additional key to the immobilizer unit. The recording procedure is the same as in the previous generation.

From 2003-2005

The cars of these years also use the ID48 chip, but it must be prepared for the brand of the model range, i.e.

Transponder ID-48 Megamos crypto Audi CAN ID48 JMA: TP25 (A2)
Transponder ID-48 Megamos crypto Seat CAN ID48 JMA: TP22 (A3)
Transponder ID-48 Megamos crypto Skoda CAN ID48 JMA: TP24 (A4)
Transponder ID-48 Megamos crypto VW CAN ID48 JMA: TP23 (A1)

From 2006-2009.

The same ID-48 is used, prepared for the brand of the car and plus for this with the CS (Component Security) data entered into it. CS is of seven cells, each with a two-digit code. This code is found in the dashboard. And in the engine control unit there are only six such cells. To get this code, you need special equipment.

From 2010-2014

Data models of the years also have ID48 chips, but to write the chip, its initial preparation by dump (Information about the dashboard) is required, preparation of a transponder (Chip) by dump without a specialized programmer, such as SUPER VAG, ABRITES, VVIDI, is impossible.

For specific makes, years and car models, you can see here:

• AUDI
• Volkswagen
• Seat
• Skoda

Advanced Code Evo – Car Chips Programmer in Keys!

Advanced Code Evo – The most modern programmer for chip keys with an immobilizer!

Identification of 99% of transponders existing in car keys

Identification of transponders Fillips Crypto 2 ID46

Identification of transponders Fillips Crypto 3 ID47 BMW F serion

Identification of transponders Megamos ID 48 (CR, CR2, Audi, Seat, Scoda, VW)

Identification of transponders in Toyota / Lexus smart keys

Identification of open or closed transponder ID48, ID46, 8E, TPX2 open or closed

Copying transponders with a fixed code (11, 12, 13, 21 22, 23, 33, 73, 4c) Copying transponders Fillips Crypto ID40 (Opel)

Copying transponders Fillips Crypto ID42 (Ford, Volkswagen)

Copying transponders Texas 4c to emulator Eh2, Eh3, TK23, TK24, TPX1

Copying transponders, Texas 61 Crypto 4D (60 , 62, 63, 64, 65, 66, 67, 68, 70) to the Eh3 emulator.

Copying Texas Crypto ll TX-6F transponders to Eh3 emulator.

Copying RFID contactless tags

Ability to create a database for transponders with fixed and crypto codes.

Unlocking transponders Megamos ID48 CR2

Unlocking transponders Fillips Crypto ID46 Suzuki

Unlocking transponders Fillips Crypto ID46 Chrysler, Jeep, Dodge, Hyundai, Kia, Honda

Generation of codes, 12), 13 transponders (11

Generating transponders for Mercedesa C, E, G 1996-2000 (ready to start the engine) Calculating pin code from transponder ID33 (Renault)

Calculating pin code from transponder ID46 (Hyundai, Kia)

Calculating pin code from chassis number (Hyundai, Kia)

Catalog of keys with transponder

Catalog of manual procedures for key programming.

Battery charging in BMW keys.

Automatic notification of users about new updates.

Device language: Russian, English.

TPX Clonnera and TPH Clonnera can be connected.

Included:

PACKAGE 1

The program allows copying Texas Crypto 4D transponders (60, 61, 62, 63, 64, 65, 66, 67, 68, 70) plus Texas Crypto ll TX-6F to TPX2 transponders, ADX (4D ceramics)

PACKAGE 3

The program allows copying transponders Philips Crypto 41 (Nissan) 42 (Ford, Vag), 44 (Ford, Vag), 44 (Mitsubishi), 45 (Peugeot)

PACKAGE 4

Preparing transponders Philips Crypto 40 (Chery, Opel, Samand), 41 (Nissan), 42 (Ford, Vag), 44 (Mitsubishi), 45 (Peugeot)

Preparing transponders Philips Crypto 2 ID.46 more than 200 models.

Prepare Philips Crypto transponders 2 ID.46 PCF 7946, PCF 7947

Prepare Texas Crypto 4D transponders (60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70)

Prepare transponders for equipment Abritus72 (Mercedes ML / BMW)

Procedures for manual programming of remotes Europe

Procedures for manual programming of remotes USA

Procedures for synchronizing remotes Europe / USA

Information on the location of diagnostic connectors

Information on the location of the immobilizer unit

Information on cables for equipment AD100Pro, MVP Pro, AD100Truck

Information about dongles for equipment AD100Pro, MVP Pro, AD100Truck

PACKAGE 6

The program allows copying Fillips Crypto 2 ID 46 transponders to TK60, TPX3, TPX4 transponders.

PACKAGE 8

Copying Transponders Temic Crypto ID: 8C (Ford, Mazda, Proton).

Temic Crypto ID: 8C transponder preparation (ford, Mazda, Proton).

PROFESSIONAL COPYING OF CHIPED AUTO KEYS IN YOUR WORKSHOP!

This is the most advanced copying and programming equipment for Advanced Code Evo transponders, developed in collaboration with key makers and automotive electronics specialists.

The basic version of the EVO has the necessary programs that will allow you to start working with transponders and with the possibility of developing in the field of copying and programming transponders.

Possibilities of basic configuration

Identification of 99% of transponders existing in car keys

Identification of transponders Fillips Crypto 2 ID46

Identification of transponders Fillips Crypto 3 ID47 BMW F serion

Identification of transponders Megamos, ID 48, CR, CR Scoda, VW)

Identification of transponders in Toyota / Lexus smart keys

Identification of open or closed transponder ID48, ID46, 8E, TPX2 open or closed

Copying transponders with a fixed code (11, 12, 13, 21 22, 23 , 33, 73, 4c) Copying Fillips Crypto ID40 transponders (Opel)

Copying Fillips Crypto ID42 transponders (Ford, Volkswagen)

Copying Texas 4c transponders to emulator Eh2, Eh3, TK23, TK24, TPX1

Copying Texas Crypto transponders 4D (60, 61, 62, 63, 64, 65, 66, 67, 68, 70) to the Eh3 emulator.

Copying Texas Crypto ll TX-6F transponders to Eh3 emulator.

Copying of contactless RFID tags

Possibility of creating a database for transponders with fixed and crypto codes.

Unlocking transponders Megamos ID48 CR2

Unlocking transponders Fillips Crypto ID46 Suzuki

Unlocking transponders Fillips Crypto ID46 Chrysler, Jeep, Dodge, Hyundai, Kia, Honda

Generating codes, 12), 13 transponders (11

Generating transponders for Mercedesa C, E, G 1996-2000 (ready to start the engine) Calculating pin code from transponder ID33 (Renault)

Calculating pin code from transponder ID46 (Hyundai, Kia)

Calculating pin code from chassis number (Hyundai, Kia)

Catalog of keys with transponder

Catalog of manual procedures for key programming.

Battery charging in Bmw keys

Automatic notification of users about new updates.

Languages: Russian, English, Polish.

Attention:

It is possible to connect TPX Clonnera and TPH Clonnera.

Included:

PACKAGE 1

The program allows copying Texas Crypto 4D transponders (60, 61, 62, 63, 64, 65, 66,

67, 68, 70) plus Texas Crypto ll TX-6F to transponders TPX2, ADX (4D ceramics)

PACKAGE 3

The program allows copying transponders Philips Crypto 41 (Nissan) 42 (Ford, Vag),

44 (Ford, Vag), 44 (Mitsubishi), 45 ( Peugeot)

PACKAGE 4

Prepare transponders Philips Crypto 40 (Chery, Opel, Samand), 41 (Nissan), 42 (Ford, Vag), 44 (Mitsubishi), 45 (Peugeot)

Prepare transponders Philips Crypto 2 ID …46 more than 200 models.

Prepare Philips Crypto transponders 2 ID.46 PCF 7946, PCF 7947

Prepare Texas Crypto 4D transponders (60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70)

Prepare transponders for equipment Abritus72 (Mercedes ML / BMW)

Procedures for manual programming of remotes Europe

Procedures for manual programming of remotes USA

Procedures for synchronizing remotes Europe / USA

Information on the location of diagnostic connectors

Information on the location of the immobilizer unit

Information on cables for equipment AD100Pro, MVP Pro, AD100Truck

Information about dongles for equipment AD100Pro, MVP Pro, AD100Truck

PACKAGE 6

The program allows copying Fillips Crypto 2 ID 46 transponders to TK60, TPX3, TPX4 transponders.

PACKAGE 8

Copy transponders Temic Crypto ID: 8C (Ford, Mazda, Proton).

Temic Crypto ID: 8C transponder preparation (ford, Mazda, Proton).

Working with keys and immobilizers: Professional key programmer CN900

The CN900 universal key programmer is designed to work with almost all immobilizers and electronic transponders (chips) that are currently available on the market of vehicles for sale.Allows you to prepare for recording, read and clone many transponders, and also allows you to erase them in their original state.

The device is ORIGINAL, supports updating from the official website.

Performs reading and identification by ID and car brand.

• 11, 12, 13, T5, 48, 8C, 8E
• 33, 40, 41, 42, 44, 45,
• 46 HITAG2 (PCF7936 / 42/46 / …),
• 4C, 4D (60, 61, 62, 63, 64, 65, 66, 67, 68, 70, 72, G-Chip), DST, DST40, DST80.

Supports chip copying.

• 11, 12, 13, T5, 33, 41, 42.
• 46 HITAG (PCF7936 / 42/46 / …)
• 4C, 4D (60, 61, 62, 63, 64, 65, 66, 67, 68, 70), DST and DST40.

CN900 instrument features:

• 3.6 “color touchscreen
• TDSX-9 System with Dual Core
• New programming developments
• Universal algorithms for programming transponders (chips)
• Possibility of identifying transponders
• Programming remote controls for various devices (alarm, immobilizer, etc.)
• Identification of control panels

Unique Features:

• Can directly copy 4C and 4D keys such as Toyota 4d id67.
• Ability to copy CN chips multiple times.
• Recognition of locked id48 transponders and can unlock them.

Main functions

• Reading transponder codes with id11 id12 id13 id33 T5 id40 id41 id42 id44 id45 id46 id48 4C 4D 8C and 8E.
• New Key Identification Function for Toyota 2010 “G”, for 4d chips – id72.
• In the future, the function of working with chips for cars made in China will be added.
• Possibility of identification of Toyota smart-key, and displaying data on the screen.
• Supports copying (cloning) transponders id11 id12 id13 id33 id41 id42 T5 as well as some id44 and Id45
• Can directly copy special chips without 4C and 4D batteries. (eg CN1 or CN2) Direct cloning of ID46 chips will be added later.
• When connected via a PC – you can save data from the read key / transponder, an unlimited number of times.
• By using the special HITAGETI function, it is possible to write the Renault CRYPTO ID46 crypto chip with CN900.
• It is possible to prepare the chip Without turning off the ECU in cars such as Mercedes Benz W140
• Can Unlock ID48 Transponders except Locked Crypto Id48
• Supports the function of calculating the Pin-code for Kia and Hyundai cars before 2007 using the last 6-digit VIN-Code.
• All Fiat keys (11,13 and 33) can be programmed.
• Support for HONDA id46 chip identification: CRV, CIVIC, and Mitsubishi ID46.

Complete set:

• Programmer CN900
• Decoder chips ID46
• Decoder chips 4D
• Power adapter
• Discs with software

1 Year Warranty.

VVDI2 FULL

Universal programmer VVDI 2 for complex diagnostics, programming, mileage change, work with immobilizers and key transponders for cars.

Programmer VVDI2 Full is an original device from the well-known company Xhorse . The manufacturer constantly provides official support for its equipment, which allows updating the software, firmware of the device and makes it possible to add new modules. The software has Russian language support.

VVDI2 supports preparation, read, write, copy and check functions of most transponders and allows working with keys and transponders for 4th and 5th generation immobilizer systems.Allows you to correct odometers in VAG group and BMW cars, engineering functions are available for these cars, performs full diagnostics and programming.

The programmer supports the protocol J2435 PasstThru which allows using the device to work with dealer diagnostic software.

Our devices come in a complete set FULL in which all the authorizations that are at the moment are open.

Open Authorizations:

• VK-01 – Key Programmer
• VJ-01 – Passthru J2534
• PS-01 – PSA Function
• VB-01 – BMW OBD
• VB-02 – BMW CAS4
• VB- 03 – BMW FEM / BDC
• VV-01 – VW Function 4th
• VV-02 – VW Function 5th
• VV-04 – online 96 bit 48 copy
• VV-05 – MQB Function
• VP-01 – Porsche
• VT-01 Toyota H
• MAC and CS in EDC17 units

Working with transponders:

Allows performing various functions with immobilizer chips: reading, preparatory, writing and copying.It has the ability to work with the immobilizer EEPROM dump, add new keys to the firmware content, a prerequisite for restoring the ignition key if it is completely lost. Carries out a test of the frequency of the car key, unlocking used keys, preparation of remotes.

Work with BMW:

Performs full diagnostics, coding, supports work with EWS, reads and writes CAS1 / CAS2 / CAS 3 via OBD2 connector, supports work with CAS3 +, CAS4 and FEM / BDC, odometer correction, reading and changing ISN, adding new keys, blocking lost keys, synchronizing CAS-DME and CAS-ELV, unlocking used keys and much more.

Work with VAG and Porsche:

Performs full diagnostics, performs engineering functions, works with immobilizers of 4th and 5th generations and MQB platforms, including reading CS, reading PIN code, reading and writing EEPROM IMMO, reading IMMO DATA , correcting VAG odometers, learning new keys, editing dumps, adapting the remote control key, working with the engine ECU and the box, many other functions.