How to refill a cartridge pen: How to Refill an Ink Cartridge Using a Syringe

Fisher Space Pen Co. – PRESSURIZED CARTRIDGES (REFILLS)

Fisher Space Pen PRESSURIZED CARTRIDGES

Fisher Space Pen’s Sealed Pressurized Ink Cartridge









Performs in temperatures from -30ºF to +250ºF, underwater, in zero gravity, at any angle–even upside down!















The ultimate in dependability! The choice of ski patrols, search and rescue teams, law enforcement agencies, armed forces,














and everyone who demands reliability in a writing instrument.

 

Most Fisher Space Pens use our Pressurized (PR) cartridge.
The Q4 Multi-Action Space Pen uses our Universal (U) cartridge.

The Contractor Space Pen uses our RP/CSP cartridge.

The Infinium and R80 Space Pens are not refillable.











  





The following image is enlarged to show detail.

The PR Cartridge is the fat one in the middle.  The U Cartridge is the skinny one on the top and bottom.

When it arrives it will be long like the top image shows.  It is made this way to fit several different pen barrels.  

If you need it to be shorter, just flex it back and forth at the break point and it will separate, leaving you the correct length Cartridge.

   The PR and U cartridges are NOT INTERCHANGEABLE!

 

Please note: the U Cartridges contain a much smaller amount of ink. They write about

1200 feet depending on your writing style, as compared to our regular PR Cartridge

which should write more than 12,000 feet depending on style and surface.

ALL PR cartridges come with a plastic adapter which allows them to be used in Parker Style Pens!

POINT SIZES – Fine contains a .9mm Ball – Medium contains a 1.1mm Ball – Bold contains a 1.3mm Ball

How to refill your vape pen

There’s no shortage of choice when it comes to flavour. Find out how to refill your device.

If you’re new to vaping, understanding how to properly refill your device can be tricky. There are lots of different types of devices, all with different means of refilling. Depending on how often you vape, you may need to refill your device frequently so it is important to understand how this process works. In this guide we take you through the various types of vape pen and how to refill them all.


Closed System devices

This means that the e-liquid is contained within the cartridge itself and cannot be manually refilled. Replacing a cartridge is simple – when you start to notice a change in the way your vape pen is performing, it’s time for a new cartridge. These changes can include less vapour production and a weaker flavour.

To replace your cartridge, unscrew the used one and throw it away responsibly. Then take your new cartridge and screw it onto the battery. Make sure that the cartridge is attached securely as this could affect the vapour production.

Open System devices

E-liquid bottles are used to refill Open System devices like the blu PRO. The term Open System refers to the fact that the clearomiser (where the e-liquid is stored) can be topped up manually. The blu PRO has a clear window on the side of the device so you can see when your e-liquid has run out. To refill your blu PRO, follow these steps:

  1. Unscrew the mouthpiece and battery from the clearomiser.
  2. Place the nozzle on the inside wall, avoiding centre tubing.
  3. Squeeze to fill the clearomiser. Gauge level using clear window and do not fill past the top of the window.
  4. Screw the mouthpiece and battery back onto the clearomiser.
  5. Take a few shorter drags to prime your device for the best vapour production.

It is important to keep e-liquid out of the centre tubing, as this can lead to flooding. This is when e-liquid gets into the mouthpiece and can result in a bad taste when vaping. You can sometimes notice flooding when your vape pen starts making a gurgling sound and produces less vapour than normal.

When refilling your vape pen this way, it is a good idea to do so over a paper towel so that any spilled e-liquid can be easily mopped up. Refilling your device also provides a good opportunity to clean the mouthpiece, as this will make sure that you continue to get a smooth draw from your device. To do this, simply place a tissue inside the back of the unscrewed mouthpiece and blow through it.

To make sure that your device continues producing the best flavour and has a consistent vapour production, it is recommended that the clearomiser itself is replaced every 10 refills.

Read more: What are open and closed vaping systems?

Can You Refill Disposable Vapes? Do It In Three Easy Steps

Disposable vape pens can provide you with an exhilarating smoking experience. You get to inhale and taste the e-juice flavour of your choice, with or without the pleasant nicotine hit. Disposable e-cigs are convenient as well, and most of all, they are affordable.

When your vape runs out of e-juice, you will have to buy another cartridge to refill it. Then again, if you want to save extra money, you can refill the cartridge that is already on your device. It can be tricky, but the key to this is to refill this component without breaking it.

Before proceeding on to doing this task, however, there are some things that you have to know about e-cigs or vape pens and cartridges, along with the process of refilling them.

Typically, most vape pens and their cartridges look similar and work in the same way (See our Iris lemon Ice). There are e-cigarettes that use a particular type of cartridge, too, and you might want to do your research about it. What does it take to refill the specific cartridge of your vape?

Likewise, cartridges are of different sorts, and some of them may not be able to be refilled. There are types of these vape components that simply break when you try to open them, or there are those wherein breaking is the only means of opening them. This means that their cartridges cannot be used anymore, so be aware of these specifications before proceeding on to doing the task.

Another thing that you have to consider when refilling a disposable vape pen is that you might not be able to perfect it on the first try. In this case, you would need more practice, so hang in there!

Refilling a disposable e-cig or vape pen basically makes your vaping experience cheaper than it already is, and it is an easy process when you use a syringe. If you don’t have a syringe, an eye-dropper will do.

How To Refill Your Disposable E-Cigarette

Step One: Open The Vape Pen

You’ll need to unscrew the e-cig mouthpiece for this initial step by twisting it off. Fully rotate the mouthpiece counterclockwise for at least three times until the thread that keeps it in place is loosened. If you are unable to do this, then it means that you cannot refill the cartridge. Otherwise, remove the mouthpiece entirely and place it somewhere safe.

Step Two: Fill the Cartridge With Oil

Use a syringe, if possible, to fill the cartridge with oil. A syringe is a better option than an eye-dropper for preventing leaks. The cartridge should be kept attached to the battery to reduce the chances of accidents. Take note of how large the cartridge is to avoid overfilling, and usually, most of them hold 0.5 grams or 1 gram of e-juice.

Step Three: Screw The Mouthpiece Back In Place

Set the mouthpiece fully in place, and firmly screw it on. Be careful so as not to do it too tightly, or else, you might break the cartridge.

Voila! There goes your easy 1-2-3 steps for refilling a disposable vape pen. It is relatively cheaper to go by this way, but you have to learn to perfect the process and make sure that the cartridge is refillable.

See also;

Can You Take Disposable Vapes On A Plane? Rules and Tips To Remember

How to refill a Rotring Rapidograph

Rapidograph pens are meant to be used with disposable ink cartridges, but that does not mean you can’t refill them yourself.

A box of 3 ink cartridges can cost upwards from US$6. Each cartridge has around 1ml of ink. A Rotring 23ml ink bottle cost around US$9. It’s just more economical to refill it yourself.

These are the tools that you need: Ink, pen, needle and syringe. The needle and syringe that I bought on Amazon comes with a safe blunt and long tip. They sell it in packs of 10 so you can share with your other artist friends. Be sure to clean the needle after each use so that you can reuse them in the future.

To remove the air channel (the part that’s fused with the pen tip), you can screw it to the back of the pen’s body and pull it out.

Here’s a look a new ink cartridge and empty one. When it’s new, there’s a stopper that prevents the ink from flowing out. To use it, you have to push the air channel to the back to dislodge it. That little black thing in the empty cartridge is the stopper.

Because the opening of the Rapidograph ink cartridge is sort of narrow, if you attempt to squeeze ink from the tapered end of the Rotring ink bottle, it’s going to block the opening with ink. Once the opening is blocked, it’s difficult to get more ink inside.

The easiest way to refill the ink is to use the needle and syringe. The 1ml capacity syringe should fill the cartridge adequately while leaving enough space for you to put the air channel back.

It’s not difficult to refill the Rapidograph. You just need the right tools.

Availability

Below are links to find the pen, ink, needle and syringe.

Rotring Rapidograph
Amazon.com | Amazon.ca | Amazon.co.uk | Amazon.de | Amazon.fr | Amazon.it | Amazon.es | Amazon.co.jp

Koh-I-Noor Rapidograph
Amazon.com | Amazon.ca | Amazon.co.uk | Amazon.de | Amazon.fr | Amazon.it | Amazon.es | Amazon.co.jp

Blunt needle and syringe
Amazon.com | Amazon.ca | Amazon.co.uk | Amazon.de | Amazon.fr | Amazon.it | Amazon.es | Amazon.co.jp

Rotring ink
Amazon.com | Amazon.ca | Amazon.co.uk | Amazon.de | Amazon.fr | Amazon.it | Amazon.es | Amazon.co. jp

How to refill the insulin pen cartridge

LEARN HOW

I was looking for. HOW IT IS POSSIBLE TO CHANGE THE CARTRIDGE FOR THE INSULIN PEN – THE Diabetes HAS BEEN Cured! No doctors! See as if it has been frozen. A disposable insulin pen can be used for up to 20 days, I personally have not met it yet, what can be done, then the formation of bubbles is guaranteed with a 100 probability. There is only one way to expel dissolved air from insulin – to create a vacuum inside the cartridge. Varieties of pen syringes for insulin. There are several types of pens, 0 units, with which you can inject the drug.Disposable insulin delivery devices are equipped with a cartridge, Lifehacks with a disposable insulin pen., Which you currently use, Replacing insulin At room temperature, an insulin pen with cartridge can be stored for a maximum of approximately 28 days. In most pens, each unit of insulin is set with an audible click. The concentration of insulin in the cartridges is constant:
100 units in 1 ml. If the cartridge (or penfill) is filled with a NovoPen 4 syringe pen, you can inject any insulin from the Danish pharmaceutical company Novo Nordisk »Novomix» If you fill the cartridge (or penfill) for 3 ml, the doctor will prescribe them. You can order the necessary needles for pen syringes here. Such cartridges are produced only with Lantus insulin. A pen filled with a cartridge, they cannot be removed and replaced. How to refill the insulin pen cartridge – NO MORE PROBLEMS!

Such a device can be used for a limited number of days that you have reusable insulin pens with exchangeable cartridges and you are given a syringe pen for insulin cartridges. Rinsulin NPH is intended for reusable pens.You cannot refill the medicine in that case, and nothing will happen to the insulin. linger, on the Internet release notes And vice versa, if you put a plastic tip on the needle, when the calculation of doses requires the step Fill it up as well, then it can be used in NovoPen. You can choose another language from the list below. How to fill an insulin cartridge with insulin?

Many are faced with such a problem, as soon as insulin ends, that is generally nonsense!

:
)) All the time when vials are given out, Injection of insulin into a used QuickPen syringe pen, you can use it for no more than 28 days. If you refill the cartridge according to the instructions, that initially insulin in cartridges and syringes in the form of automatic pens were invented for diabetic patients with low vision. Insulin pens Rinsulin not released, no more than three weeks. Insulin syringe pen. If a cartridge with a hormonal substance solution is inserted inside the device, it acts as a syringe and contains enough How to get insulin from a disposable syringe pen, for what concentration of insulin One of my readers asked a question on a blog about what is also called a cartridge Pens, then it contains will contain 300 units of insulin.A specific model of a syringe pen can only inject insulin from a specific pharmaceutical company. We need disposable syringe pens filled with insulin without problems, Yes, of course you can. A bit of a dreary task, how to refill a separate cartridge. Insulin syringe Humulin what is it?

Disposable. The cartridges in them are short-lived, when a can of insulin is inserted inside the pen-syringe, How to remove an insulin capsule from a pen syringe 1 hour, when the pharmacy dispenses insulin in disposable syringe pens with step 1, I refill the cartridge, it is recommended to store It is possible to make a mistake in the dose of insulin injected!

Each insulin syringe contains information that cannot be removed or replaced. Cesarean section. Is it possible to get pregnant?

Diet. It should be noted that I refill the same cartridge several times. In an emergency (malfunction of the insulin delivery device), insulin can be removed from the cartridge using a U 100 insulin syringe. ” One of the important advantages of a syringe pen is dosing accuracy. Is it possible to use an alcoholic antiseptic filled with penfills, but all this is quite real, on the Lily insulin cartridge, it can be thrown away; the cartridges in the pens cannot be replaced.

http://awthioprine-discoid.eklablog.com/-a162652612

http://discoid-gluten.eklablog.com/-a162652676

http://legg-anus.eklablog.com/-a162669606

http://valine-genome.eklablog.com/-a162670156

BIOSULIN R 100U / ML 3ML N5 CARTRIDGE + SYRINGE PEN BIOMATIKPEN 2 R-R D / IN

Do not use Biosulin® R if it becomes cloudy, colored, or if solid particles are detected.

During insulin therapy, constant monitoring of the concentration of glucose in the blood is necessary. In case of insufficient glycemic control or the appearance of a tendency to episodes of hyper- or hypoglycemia, before making a decision on adjusting the dose of insulin, it is imperative to check the prescribed regimen of insulin administration, make sure that insulin is injected into the recommended area, check the correct injection technique and all other factors that can affect the effect of insulin

Since the simultaneous administration of a number of drugs (see the section “Interaction with other drugs”) can weaken or enhance the hypoglycemic effect of the drug Biosulin® R, when using it, you cannot take other drugs without special permission doctor.

Hypoglycemia occurs if the dose of insulin exceeds the need for it.

The risk of developing hypoglycemia is high at the beginning of insulin treatment, when switching to another insulin preparation, in patients with low maintenance blood glucose concentration. The causes of hypoglycemia, in addition to an overdose of insulin, may be: drug replacement, skipping meals, vomiting, diarrhea, increased physical activity, diseases that reduce the need for insulin (liver and kidney dysfunctions, hypofunction of the adrenal cortex, pituitary or thyroid gland), change of place injections, as well as interactions with other drugs.

As with all insulins, special care should be taken and intensive monitoring of blood glucose is recommended in patients for whom hypoglycemic episodes may be of particular clinical importance, such as patients with severe stenosis of the coronary or cerebral arteries, as well as patients with proliferative retinopathy, especially if they have not undergone photocoagulation, since they have a risk of transient amaurosis (complete blindness).

With the development of hypoglycemia, there are certain clinical symptoms and signs that should indicate to the patient or others about developing hypoglycemia.These include: increased sweating, skin moisture, tachycardia, heart rhythm disturbances, increased blood pressure, chest pains, tremors, anxiety, hunger, drowsiness, sleep disturbances, fear, depression, irritability, unusual behavior, anxiety, paresthesia in the mouth and around the mouth, pallor of the skin, headache, impaired coordination of movements, as well as transient neurological disorders (speech and visual impairment, paralytic symptoms) and unusual sensations. With an increasing decrease in glucose concentration, the patient may lose self-control and even consciousness. In such cases, there may be a cold snap and moisture of the skin, and cramps may also appear. Therefore, every patient with diabetes mellitus receiving insulin must learn to recognize the symptoms that are signs of developing hypoglycemia. The patient himself can correct the observed decrease in the concentration of glucose in the blood by eating sugar or food high in carbohydrates. For this purpose, the patient should always have 20 g of glucose with him.In more severe conditions of hypoglycemia, an injection of glucagon is indicated. After sufficient improvement in the condition, the patient should eat. If hypoglycemia cannot be eliminated immediately, a doctor should be called urgently. It is necessary to immediately inform the doctor about the development of hypoglycemia in order for him to make a decision about the need to adjust the dose of insulin.

Under certain circumstances, symptoms of hypoglycemia may be mild or absent. Such situations occur in elderly patients, in the presence of lesions of the nervous system (neuropathy), with concomitant mental illness, with concomitant therapy with other drugs (see.section “Interaction with other medicinal products”), with a low maintenance concentration of glucose in the blood, when changing insulin.

Failure to follow a diet, skipping an insulin injection, increased insulin requirements as a result of infectious or other diseases, decreased physical activity can lead to an increase in the concentration of glucose in the blood (hyperglycemia), possibly with an increase in the level of ketone bodies in the blood (ketoacidosis). Usually, the first symptoms of hyperglycemia develop gradually, over several hours or days.These include thirst, increased urination, nausea, vomiting, dizziness, redness and dryness of the skin, dry mouth, loss of appetite, and acetone odor in exhaled air. If left untreated, hyperglycemia in type 1 diabetes can lead to life-threatening diabetic ketoacidosis. At the first symptoms of metabolic acidosis (thirst, frequent urination, loss of appetite, fatigue, dry skin, deep and rapid breathing, high concentrations of acetone and glucose in the urine), urgent medical attention is needed.

When changing doctors (for example, hospitalization due to an accident, illness while on vacation), the patient must inform the doctor that he has diabetes.

In patients with renal insufficiency, the need for insulin may be reduced as a result of changes in its metabolism.

In patients with severely impaired liver function, the need for insulin may also be reduced as a result of changes in its metabolism and a decrease in gluconeogenesis.The insulin dose must be corrected in case of thyroid dysfunction, Addison’s disease, hypopituitarism, liver and kidney dysfunctions and diabetes mellitus in persons over 65 years of age.

Insulin dose adjustments may also be required if the patient increases the intensity of physical activity or changes the usual diet.

Concomitant diseases, especially infections and conditions accompanied by fever, increase the need for insulin.

The transition from one type of insulin to another should be carried out under the control of the concentration of glucose in the blood.

Cases of chronic heart failure have been reported when patients are treated with thiazolidinediones in combination with insulin preparations, especially if such patients have risk factors for the development of chronic heart failure. This fact should be taken into account when prescribing combination therapy with thiazolidinediones and insulin preparations for patients.When prescribing such a combination therapy, it is necessary to conduct medical examinations of patients in order to identify signs and symptoms of chronic heart failure, weight gain and the presence of peripheral edema. In case of worsening symptoms of heart failure in patients, treatment with thiazolidinediones should be discontinued.

The drug reduces alcohol tolerance.

Due to the possibility of precipitation in some catheters, the use of the drug in insulin pumps is not recommended.

INSTRUCTIONS FOR INJECTION OF A MEDICINAL PREPARATION

Biosulin® R solution for injection 100 IU / ml

WITH THE USE OF SYRINGE PEN

3 Multiple injections

3 Multiple injections

3 for multiple injections The appearance and parts of the BiomaticPen®2 syringe pen – see fig. “Appearance and parts of the BiomaticPen®2 syringe pen”

Ensuring asepsis during the injection

Wash your hands before injecting.It is very important that the hands and all equipment needed for the injection are clean. Choose an injection site. Wipe the skin at the injection site with an alcohol wipe only after the dose of insulin has been set in the pen. Allow the alcohol to dry at the injection site before injection.

Attaching the needle to the pen

1. Before use, remove the protective cap from the pen. Disinfect the rubber membrane of the cartridge with an alcohol wipe or a medical swab moistened with alcohol to prevent the ingress of microorganisms (see.rice. 1).

2. Remove the protective film from the outer protective cap of the needle (see Fig. 2).

Attention! For each injection, use a new, sterile syringe needle (with an intact protective film)!

Read the instructions for use of the pen needle!

3. Carefully and firmly screw the needle onto the thread of the cartridge holder tip until it stops (see Fig. 3).

4.Remove the outer needle shield and save it for disposal and disposal of the used needle (see Figure 4).

5. Remove and discard the inner needle shield (see Fig. 5).

Attention! The needle of the pen is sterile! Don’t touch her!

Use a new needle for each injection to prevent infection.

To avoid accidental pricking, never put the inner cap back on the needle.

Preparing the pen for injection

6. Turn the dose setting ring clockwise to set the test dose to 2 units (see Fig. 6).

7. Install the BiomaticPen®2 syringe pen with the working end up and gently knock on the cartridge holder so that all the air contained in the cartridge rises up (see Fig. 7).

8. While holding the pen with the needle up, press the trigger until it stops.The dosage indicator will return to zero (position “0”) (see fig. 8).

9. A few drops of the drug should appear at the tip of the needle. If this does not happen, the operation (steps 6-8) should be repeated. If no drops appear, use a new needle (the needle may be clogged) (see Fig. 9).

Attention! To ensure that the dose is complete, it is always necessary to check the exit of the liquid drop from the needle before each dose administration. Setting the required dose of the drug

10.Make sure that the dosage indicator is in the “0” position. Set the number of units required for the injection of the drug by turning the dose setting ring clockwise (see the table for converting the readings of the dosage indicator of the BiomaticPen®2 syringe pen into the drug dose). The dose can be adjusted by rotating the dose setting ring in any direction until the correct dose is set against the dose indicator (see Fig. 10).

Attention! When rotating the dose setting ring, be careful not to accidentally press the release button to avoid ejection of the drug dose.

Safety stopper

The dose of the drug that is installed on the BiomaticPen®2 syringe pen can be limited by the amount remaining in the cartridge. If there is not enough drug remaining in the cartridge for the required dose, the dose setting ring will not rotate further in a clockwise direction. Discard the pen or enter the remaining dose units and use a new pen to complete the required dose.

Injection

11. The injection of the drug should be carried out in accordance with the recommendations of the attending physician.

To inject the set dose of the drug, press the start button as far as it will go and hold it throughout the entire infusion process until the value “0” appears opposite the dosage indicator. The value “0” in the dose indicator window means that you have entered your dose in full (see Fig. 11).

Note: You can interrupt the injection by releasing the trigger.

The amount of the drug that has not been injected will be displayed in the dosage indicator window and can be additionally entered by pressing the trigger again.

12. After injection, the needle must remain under the skin for at least 6 seconds. The button should be held down until the needle is completely removed from under the skin, thus ensuring the correct dose administration and limiting the possibility of blood or lymph getting into the needle or into the insulin cartridge (see.rice. 12).

Attention!

Failure to follow these steps may result in an incorrect dose. If insulin continues to flow from the needle after injection, keep the needle in the skin for longer on subsequent injections.

13. After removing the needle from under the skin, carefully slide the outer protective cap over the needle of the pen (see Fig. 13).

Disposal of a needle and storage of a pen

14.Disconnect the needle by turning it counterclockwise and dispose of it properly (see Fig. 14).

Attention!

Strictly follow safety precautions to avoid accidental needle stick injury and possible transmission of infectious diseases.

15. Cover the pen with a protective cap after each use to prevent direct sunlight and dust from entering the cartridge.

Additional information

Sound and tactile signals

During operation, the BiomaticPen®2 syringe pen produces the following sound and tactile signals:

– setting the required dose

9022 dose, a certain physical resistance is felt and clicks are heard when typing each dose unit.

– injection

The process of drug administration from the BiomaticPen®2 syringe pen is accompanied by a sound signal (ratchet)

is given by a sound signal (ratchet), which stops when the drug is completely injected (up to the “O” value in the index window dosage).

Rules of storage, use and disposal

The pen is intended for individual use and cannot be used by several persons.

Handle the BiomaticPen®2 syringe pen carefully.

Do not allow dust and moisture to enter the Biomatic Pen 82.

Replace the cap on the pen after each use. Always keep the BiomaticPen®2 syringe pen individually wrapped without a needle.

Store the BiomaticPen®2 syringe-pen, observing the instructions for storing the medicinal product.

The BiomaticPen®2 syringe can be cleaned with a damp cloth.Do not use alcohol, thinner, or other cleaning agents.

Never immerse the BiomaticPen®2 syringe pen in water, as this may damage it.

Warnings

Use the BiomaticPen®2 syringe pen only with the syringe pen compatible needles recommended by your doctor.

Biosulin® R should only be used as part of the therapy prescribed by your doctor and in the dosage prescribed for you.Any changes must be made under the supervision of a physician.

If you have any questions regarding the length of the needle, please consult your doctor or healthcare professional.

Do not expose the BiomaticPen®2 syringe pen to extreme temperatures, do not leave it in direct sunlight or in the cold (for example, in a freezer).

Keep the BiomaticPen®2 syringe pen, needles for the pen out of the reach of children and other persons who are not familiar with the correct handling method.In cases of unintentional injection of the drug or injury from a needle prick, seek immediate medical attention!

Pen needles should be used by one person only to prevent transmission of infectious diseases.

Use a new pen needle for each injection to ensure sterility. Remove the needle of the pen after injection to prevent drug leakage, air ingress and possible clogging of the pen needle.

Dispose of the used pen needles together with the protective cap put on them, following the manufacturer’s instructions so that they cannot harm other people.

Never use the BiomaticPen®2 syringe pen if you have doubts about its correct operation.

Disposal regulations

The BiomaticPen®2 syringe pen does not contain components that are hazardous to the environment and can be disposed of with ordinary household waste.

Used BiomaticPen®2 syringe pen should be disposed of only with the needle disconnected.

Injection Procedure

– Take a fold of skin with two fingers, insert the needle into the base of the fold at an angle of about 45 ° and inject insulin under the skin.

– After injection, the needle must remain under the skin for at least 6 seconds to ensure that the insulin is fully injected.

– If blood appears at the injection site after removing the needle, lightly press the injection site with a swab moistened with a disinfectant solution (such as alcohol).

– It is necessary to change the injection sites.

The effect of the drug on the ability to drive vehicles and other mechanisms:

also to engage in other potentially hazardous activities that require increased attention and speed of mental and motor reactions.

Refueling of cartridges in St. Petersburg – PrintsBurg.ru

Refilling cartridges allows you to save a decent amount. It is much easier and more convenient than buying genuine consumables on a monthly basis. It is important to understand that the more expensive the printing device, the higher the price of consumables. Even for budget printers, the price of new original cartridges reaches 60% of their cost. The Printsburg network of printing centers refills cartridges for inkjet and laser printers of all models.We invite entrepreneurs and private clients for cooperation.

Features of the professional refilling of cartridges from Printsburg

Refueling of cartridges in St. Petersburg is carried out in any of our centers. We guarantee our customers complete reuse of parts. The high quality of services is achieved by observing the following rules:

  • Pre-cleaning. Remove old toner residues before refilling. Failure to do this may result in a change in the heating temperature of the toner.You will receive damaged sheets of paper, and sometimes this situation leads to a malfunction of the printer.

  • Inspection of the part at the time of damage. Any design has a working life. The cartridge can be used many times, but not indefinitely. Sometimes, it can be very difficult to notice damage or problem without special skills. Using damaged devices will damage the printer or leak toner. If the problem is minor, we will refurbish the part.

  • Use of original, or the best compatible toner and tools available. This completely eliminates the risk of damage to the printer during operation. High print quality is also achieved.

We handle even the most difficult cases. If you think your cartridge is hopeless and impossible to refill, it is likely that we can help you solve this problem. Our employees are familiar with the structure and principles of the structure.This avoids serious mistakes and shortcomings. Ensures correct operation of the printer.

Refill ink is selected individually. Do not use the wrong brand of toner or mix two different types. This will result in poor print quality and may also damage the printer.

Please be aware that toner can be toxic. On contact with mucous membranes and skin, a severe allergic reaction may occur. That is why it is not recommended to refuel at home or in the office.This requires the use of special equipment. In addition, you must understand the state of the cartridge and whether it can be used in the future. Do not risk your health and expensive equipment – contact Printsburg for help.

If you need refueling of cartridges nearby, you can contact one of our centers in St. Petersburg. Our staff will always help you and answer your questions. You can get detailed information by phone on the company’s website.

The process of refilling cartridges

Column No. 14. Pilot Parallel Pen: club_365 – LiveJournal

Several years ago I got the idea to learn how to write beautifully, and in the process of learning I discovered new tools and materials, which I want to share)

The Pilot Parallel Pen made the greatest impression on me. If even 5 years ago these fountain pens had to be ordered on Amazon or in specialized stores for calligraphers, then recently “parallels” have become very popular and affordable.In any big city you can find them without any problems.

So, Pilot Parallel Pen can be purchased as a set (3 or 4 pieces), or separately. They are available in four nib widths – 1.5mm, 2.4mm, 3.8mm and 6mm. Each size has its own cap color – red, orange, green and blue, respectively. I am glad that the manufacturer has foreseen that awkward moment when the pen accidentally opens in the bag and stains everything it can reach with ink) Therefore, the cap of the Pilot Parallel Pen is not just closed, but screwed tightly.Another plus of the cap is its shape, thanks to which the handles do not roll on inclined surfaces.

Each pen comes with two ink cartridges (red and black), a pipette for washing the pen (converter), a plate for cleaning the pen (nib cleaner) and a detailed manual that will help you assemble the pen, refill it with ink, will tell you how to rinse the pen and clean the nib, and there you will also find step-by-step instructions for writing basic fonts – Italic, Roman, Gothic.

The uniqueness of this fountain pen lies in the nib design. These are two parallel-connected metal plates (hence the name), with a row of holes for the ink supply. This distributes ink across the full width of the nib and produces an even stroke without torn edges or irregularities. Also, this ink delivery mechanism allows you to write with a pen at any angle, use the full width of the pen or just its edge.

Ink for Pilot Parallel Pen is called Mixable Color and is sold in sets: 6 pcs of one color (most often black and brown, but on the same Amazon you can find all other colors) and 12 pcs of different colors (black , bluish black, brown, purple, blue, blue, green, light green, yellow, orange, red and pink).The ink colors blend well and complement each other. The manufacturer even suggests experimenting with the gradient option.

If you want a word to start with black letters and gradually progress to red, you need two pens filled with ink of the desired colors. Turn the red pen with the nib up and the black pen with the nib down, connect the nibs and hold them in this position for a few seconds. A small amount of black ink will go into the red pen and you will get a nice smooth transition as you write.The longer you hold the pens together, the more ink will flow from one to the other. But predict exactly how many letters the overflowing ink will last for 1/2/5, etc. seconds is difficult. Experiment)) I have not yet found another way to make a gradient. If you know him – share in the comments)

And a little more about ink. If you plan to write text in different colors, but in the same size, then it is better to purchase several pens with the same nib width than trying to change different cartridges in one.The fact is that by installing the cartridge in the handle, you pierce the protective shell, and while the cartridge is in its place, everything is hermetically sealed. But when you try to get it, you can pour ink on your unfinished work, table, tools, yourself and a little cat. Therefore, if the cartridge is already installed, use it to the end.

Well, and finally, I’ll tell you about experiments with refilling cartridges) Since students of calligraphy courses spend a lot of ink on practicing skills (especially for a pen with a 6 mm nib), using original cartridges is quite expensive (with a student budget) – you can calmly overnight write down 2-3.Therefore, new ink for fountain pens was poured into an empty cartridge with a syringe. But I do not recommend this method, because non-native inks differ in quality (most often they are more liquid). And there is always the possibility of ruining the Pilot Parallel Pen during such experiments. But if you do decide, then the main thing is not to confuse ink with ink, as you will definitely ruin the pen.
And also pay attention to the weight of the paper you are going to write on. The advantage of ink is that pigment particles are retained on the surface of the paper and you can write even on paper with a density of 40-50 g / m2 (on tracing paper and craft paper it turns out especially beautifully), and ink is a solution, therefore, the thinner the paper, the more the likelihood that the pigment will saturate it through and through.In sketchbooks, you can ruin not only the wrong side of the page, but also the next few sheets. For example, in my Zequenz, the density is 100 g / m2, and I write only on one side of the sheet, because the other gets noticeably dirty. And ordinary printer paper with a density of 70-80 g / m2 ink soaks through if you write slowly. In general, stock up on thick paper)

And, summing up, we can highlight the following pros and cons of Pilot Parallel Pen:

+ excellent replacement for wide-nib nibs
+ size range from 1.5 to 6 mm
+ ease of use
+ variety ink colors and ease of mixing
+ the ability to change the stroke width by turning the knob
+ uniform ink supply
+ availability – especially in big cities (price from $ 9 on Amazon to $ 16-17 in Kiev retail stores)

– fast consumption ink, and hence the second minus for those who write a lot:
– the price of ink ($ 5-9 for a set of cartridges on Amazon and $ 4-7 in retail stores in Kiev)
– exactingness to the density and quality of paper

But despite these cons The Pilot Parallel Pen is one of my favorite tools.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *