Amazon.com : Quartet Glass Whiteboard, Magnetic Dry Erase White Board, 6′ x 4′, White Surface, Infinity (G7248W) : Office Products
So originally I purchased a black 3×2 board from Staples, since they listed an earlier delivery date than Amazon.ca, but after multiple emails to customer service I got the board a month after the Amazon board would’ve been delivered. (Lesson learned, Amazon has delivery and customer service figured out far better than others).
Black board: basically only able to use liquid chalk or Sharpie water based paint markers in light colors that get washed out by any glare or reflections. You have to really clean the board to remove residue from these kinds of markers or they will leave cloudy streaks. They look better than classic white board markers, but there is no simply wiping the marker off the board. Works good for semi permanent or permanent markings like weekly/monthly checklists etc.
After deciding legibility was important and tired of anything written on the black board being completely washed out by glare I ordered a white version 3×2 board. ..
Then I realized, I could probably strip the black paint off and frost the back with a can of frosted spray paint. The back metal sheet is held on by double sided tape, easily removed with 99% alcohol to dissolve the glue and a putty knife slowly slid underneath. The Black is indeed a layer of paint that can be scraped off with the help of paint stripper. After removing the paint from the back, I found that there was overspray on the front of the board which needed to be removed with a bit of scraping. After taping off the edges, and spraying a couple coats of paint, it looked really great, although no longer magnetic.
Frosted Board (home made): looks really nice. Markers are legible. If I did it again I would tape off an inch of the back all around the circumference of the board, giving it a clear frame which would make it look amazing.
White Board: probably looks the best. The white backing makes markers the most legible, although you can see the double sided tape used to hold on the sheet metal on the back.
Markers: liquid chalk and Sharpie Paint Markers look the best and are the most legible. I find bullet tips produce an even line instead of the uneven lines of chisel tips. Chisel tips make all writing look terrible. These markers do require work to clean off the board though (scraping and wiping). Just a warning, the Sharpie Paint markers come in water based and oil based. The oil is REALLY hard to clean off, but would work well for a permanent calendar template. Classic whiteboard markers will work on the frosted and white boards, with darker colors being better and some lighter colors being almost invisible. And wipe right off like on other whiteboards.
Installing: I made a template out of paper, but if possible just tape the posts to the board and have someone hold it in place while you drill it inplace. There is VERY LITTLE forgiveness or wiggle room. Also the posts you attach to the wall are female, so you can’t just put the board up and screw the caps on, you have to hold the board in place and screw the male caps through the board. .. he install process and hardware needs a rethink. There has to be a better way. The 3×2 board does line up with wall studs perfectly, so that’s nice.
Conclusion: while nice and elegant looking, I’m not convinced a board and some blackboard paint wouldn’t have been better. The magnets just ok. I don’t use mine. Avoid the black since glare is a pretty big problem. I use a t-square with self adhesive rubber bumpers to keep the ruler off the surface to avoid bleed from the wet markers. Felt bumpers would work as well.
The Difference Between Porcelain, Melamine & Glass Whiteboards
- How often will you be using it?
- What’s the purpose?
- Where will you be placing the whiteboard?
- How much money do you want to spend?
- What style are you looking for?
|Easy||Good for Light Use|
|Easy||Best for Heavy Use|
|Easy||The Top Whiteboard|
What is A Melamine Whiteboard?
Melamine is an economical and inexpensive laminate coating for whiteboards. The compound is made of cheaper material so the coatings on a whiteboard will wear down faster compared to a porcelain board. The wearing down of the melamine and the porous design will lead to ghosting of the markers. This can be fixed by cleaning and conditioning the board regularly. Whiteboards with a melamine finish are great when looking for a more affordable product. You may want to save some money by going melamine if you’re using the board less frequently.
What is A Porcelain Whiteboard?
Our porcelain whiteboards are made of white ceramic and steel or have aluminum backing. Boards with steel backing are also magnetic. Ceramic is a durable material that is more resistant to damage such as stains, dents, and scratches. Porcelain markerboards feature longer lasting layers. This is great for heavy use because it requires less cleaning and markers are less likely to ghost. Installations of porcelain whiteboards are perfect in common rooms like factory floors and office lobbies. The only downside to this type of board is that is a little more costly, but the lifespan is much more substantial to melamine.
All About Glass Whiteboards
Whiteboards made of glass are extremely durable and are constructed from tempered glass for safety. The product will cost more than a melamine or porcelain board, but will not streak or ghost. Glass whiteboards are modern and come in many different colors, including clear. Our markerboards are available with many framing options or frameless if you prefer. If standoffs are included for wall mounting, they give the board a strong wall anchor. Some glass boards are magnetic for hanging documents, plans, and memos. Glass boards often feature rounded corners for safety. Many people accent the boards with a colored wall behind it for a brighter display. Floorstanding tempered glass whiteboards are also available in a few designs – both with wheels for easy transportation. These are great in offices or classrooms for group collaboration, presenting, or teaching. Our tables with whiteboard surfaces are often found in schools or offices for a creative way of jotting down notes or drawing. One of the best features of a glass surface is that you can use liquid chalk, dry erase & wet erase markers. If you have a modern office or workspace where a board would be used frequently a glass whiteboard is what you’re looking for.
Can I Build My Own?
Buying products such as melamine sheets from your local store or Lexan (to have a glass whiteboard look) might look great at first, but after a while ghosting and streaking will begin to appear because of the lower quality material. This means that you can only keep notes and projects on the board for a small period of time before cleaning again. The cleaning of the boards will have to become more extensive. This will cost you more money for purchasing cleaning supplies, as well as costing you more time. We recommend going with one of our affordable whiteboard options. With different styles to fit any setting, we know you’ll find one that’s perfect for you!
Whiteboard vs. Dry Erase Board
Whiteboards are excellent tools for schools and workplaces. They encourage collaboration and enable classmates and colleagues alike to share important information and learnings. If you’re looking to replace an old whiteboard or are looking for a new whiteboard option, you may have seen the term “dry erase board”. Our team are frequently asked, “what is the difference between a whiteboard and a dry erase board?”.
For those wondering what type of whiteboard is best, the answer is that whiteboards and dry erase boards are almost the same thing. We’re here to outline the difference in whiteboard vs. dry erase board (or lack thereof), the types of materials whiteboards are made of, glass dry erase boards vs whiteboards, and what type of whiteboard is best for your requirements.
What Is The Difference Between a Whiteboard and a Dry Erase Board?
If you’re wondering, “is a whiteboard the same as a dry erase board?”, you’re not the only one! It’s one of the questions our team are most frequently asked. The truth when it comes to whiteboard vs. dry erase board is that they’re essentially the same thing.
In short, there are far more similarities when it comes to a whiteboard vs. dry erase board than differences. One of the significant similarities in a whiteboard vs. dry erase board is that they are manufactured with a non-porous material. This non-porous material can be written on and then immediately erased, without applying moisture or spray. The immediate removal of text is one feature that makes whiteboards and dry erase boards far more practical than traditional chalkboards.
Is a Whiteboard the Same as A Dry Erase Board?
When it comes to whiteboard vs. dry erase board, the truth is that they are the same material. The materials they’re typically made of include melamine, porcelain and glass.
Melamine is the type of whiteboard you’re likely to see in most schools and offices. Melamine is a laminate coating that is essentially plastic back by a pressboard. It is the method used for most whiteboards. It is the most economical type of whiteboard ad it is made from an inexpensive laminate.
Melamine whiteboards are prone to be worn down faster than other types of whiteboards. They can be prone to holding marker residue more than other materials as the surface can, over time, become more permeable. Another common issue is that they can warp early in their shelf life.
Porcelain whiteboards are a very durable material that is not at all porous, meaning it’s challenging for any whiteboard pen or markers residue to sink into the surface. The non-porous material of porcelain means the whiteboards super easy to clean and stay whiter for longer. However, a significant setback of porcelain is their heaviness. To move a porcelain whiteboard may require a group effort.
Glass whiteboards are widely considered the best option for whiteboards. Numerous factors deem glass the best choice of whiteboard surface, including the durability, ease of use, and resilience.
Glass Dry Erase Board vs Whiteboard
Now that we’ve settled some of the myths around whiteboard vs. dry erase board, let’s look at the glass dry erase board vs whiteboard. Glass dry erase boards are a type of whiteboard. Still, there are subtle nuances in terms of their durability, ease of use and damage resistance.
The Durability of a Glass Dry Erase Board vs Whiteboard
Glass dry erase boards are essentially whiteboard royalty because they are built with durable tempered glass. They are highly resistant to damage and are very hard to destruct.
Using a Glass Dry Erase Board vs Whiteboard
Glass is an entirely impermeable surface material, which means that any residue is easily wiped away without using moisture or other materials to assist the user. Unlike regular whiteboards, even after heavy or frequent use, the surface is never stained.
The Resilience of Glass Dry Erase Board vs Whiteboard
Glass boards are incredibly durable and resilient to scratches and scuff marks, damaging the surface of other less durable materials. Dents and other faults in different materials’ surface can damage your markers by catching on the surface. It can also interrupt your writing flow if you consistently have to dodge that one dent in the whiteboard. Glass dry erase boards maintain that smooth, shiny surface no matter where they are.
What Type of Whiteboard is Best?
So, what type of whiteboard is best? We’ve busted some common misconceptions about whiteboard vs. dry erase board, and now it’s crunch time.
If we have to pick one whiteboard material to champion, it is undoubtedly a Glass Dry Erase Board. The benefits of glass whiteboards extend beyond the ease of use. Whilst they might be a more significant investment than a standard melamine whiteboard, they will stand the test of time in terms of their durability and resistance to surface level scratches, scuff marks and dents.
However, if you’re on a budget or don’t want to spend too much money on a whiteboard, a classic melamine whiteboard is the most economical option in the whiteboard range. Much the same, if you don’t need it to last you a lifetime, or you’re not yet sure how much use you’ll get out of it, then selecting a melamine whiteboard is probably more suitable for you.
Ultimately, the choice is yours whether you invest in a glass dry erase board or a melamine whiteboard for your space. Whiteboards and Pinboards have an extensive range of whiteboards that aren’t just excellent quality; they’ll enhance any workspace’s look. To find the best range of whiteboards in Australia, check out Whiteboards and Pinboards selection of whiteboards today. We stock an exclusive range of custom whiteboards, mounted whiteboards, glass whiteboards, mobile whiteboards, music white boards, whiteboard planners, porcelain white boards, pre printed whiteboards and slimline whiteboards.
48″ Dry Erase Whiteboard Rolls By The Foot
The 48″ Dry Erase Whiteboard Sheet Off the Roll By the Foot option allows you to purchase the length you need.
Each foot is a linear foot (48″ wide by 12″ long) and ships as a roll (not cut pieces). For example, if you purchase 3′ you will receive one roll that is 48″ wide by 3′ long.
When ordering, enter to the total number of feet you would like to purchase in the quantity section and then add to cart. The calculated price in the cart will have show the price with any quantity discounts. Off the roll by the foot option requires a minimum of 2′.
Our rolls of peel and stick adhesive magnetic receptive dry erase whiteboard turn most indoor surfaces into a visually appealing whiteboard. Just trim the whiteboard sheet to fit your space, peel off the release paper and stick the adhesive to the clean, dry surface. The adhesive backing attaches to most finished indoor surfaces. Cut the sheet to size with a utility knife.
Cover old chalkboards and whiteboards
Each sheet is magnetic receptive and magnets will adhere to the surface just like any other steel surface. The stronger the magnet you use, the stronger the magnetic pull will be on the dry erase whiteboard sheet. We recommend using rare earth magnets (neodymium magnets) on the dry erase whiteboard surface. We recommend using a magnet that is 1″ or larger for card stock or items that are heavier and thicker. The sheet has a permanent, pressure sensitive adhesive that covers the entire back side of the sheet. The dry erase whiteboard will not stick to unfinished bare wood or freshly painted surfaces.
The whiteboard is shipped in a roll and magnets will not stick to the whiteboard until it is mounted on a surface. Magnets will not stick if the sheet is rolled.
The rolls ship as one continuous sheet. The maximum roll length is 50′ and quantities over 50′ will ship on a separate roll. If you would like several different lengths in one order, please contact us to discuss the fees and options.
Tips and Tricks to Become an Expert— Ink Factory
Most people only use dry erase markers to scribble a few words here or there on a whiteboard. At Ink Factory, the whiteboard is a huge part of our day-to-day. In fact, we have over 500 square feet of whiteboards in our studio that we can cover with dry erase drawings!
We’ve talked about ways to maximize your office’s whiteboard, but how about becoming an expert at dry erase drawings? Here are some helpful tips and tricks to help boost your dry-erase drawing abilities.
First off, check your markers to make sure they are not dried up. When markers are dry, it they become very hard to use and the ink is harder to see. We recommend stocking up on lots of fresh markers. Black is the most often used, so make sure to double or triple up on your black marker inventory. We also like to reduce waste by using refillable dry-erase markers.
There are different types of marker tips for dry-erase markers. They are typically chisel-tip markers, but some also come as bullet tips. Here is the difference between the two:
Chisel tips are great to use because they are actually two tips in one! The fatter side lets you draw a thicker line, while the thinner side gives you a skinnier line. Your writing will look cleanest if you chose one side and stick with it as you write. That makes your letters more consistent.
Bullet tips only have one line width, so you do not have to worry about the angle you are holding a bullet tip at. They are less common for dry erase markers, but provide a very even line and are great to take advantage of if you have some! Generally, bullet tips are better to use for writing or outlining instead of coloring because of the width of the tip.
Handwriting Practice for Dry Erase Drawings
It helps to practice your handwriting using dry erase markers. The markers themselves feel different writing with a pen or pencil. The surface you are writing on is also very different since it will be vertical instead of on a table or other horizontal writing surface.
It also helps to practice because most of the time other people are going to be reading what you write down. It’s okay to give yourself a little bit of extra time as you write to make sure that your handwriting is legible. You will also be writing a bit larger than you are used to, so we recommend practicing writing letters about 1-inch tall or more.
If you are writing down notes during a meeting on a whiteboard, try to focus on writing down only the main points and not necessarily every word. As you filter out information in your head, it gives you more time to focus on making a few words really easy to read instead of quickly scribbling down as many words as possible. You can also find some tips on note-taking here.
Erasing Dry Erase Marker Ink
One of the best features of dry-erase markers is the erasing! Once dry, the ink wipes off very cleanly. You can use this to your advantage. Some great erasing tools include your finger, a pencil eraser, or a microfiber cloth. Once you have let the ink dry on the drawing surface, use one of these tools to help straighten a line, clean up edges on a shape, or even write on top of a solid color. Just make sure to let the ink dry– wet ink smudges if you wipe it too early. To help the ink dry, simply blow air onto it – it should dry almost instantly!
This also means that the ink can be easily erased on accident. Someone leaning up against the board or your hand resting on a drawn image may wipe off part of your hard work. One way to avoid this is by using your pinky to stabilize your hand while drawing on the board instead of using your whole hand. That will make the amount of board you need to touch while drawing much smaller and help prevent wiping off your other content.
Dry erase markers feel different than normal markers when you are trying to cover a larger surface. Have you ever tried to color with a dry-erase marker and it just ends up erasing itself as you go? That can get pretty frustrating. Here are some tips to get the most out of your marker as you cover a larger area:
- Take it slow. If you try to cover a large area really quickly, the marker’s ink can’t keep up. Go a little slower and more deliberate than usual. This will help you get a fuller color.
- Go smaller with lines. While you’re coloring in slowly, you can also cover more space if you work smaller than usual. It may seem counter-intuitive, but smaller lines also help use the dry-erase ink to the fullest.
Another helpful trick is to start off with the color and finish with the outline of shape as opposed to the other way around. This is especially true if it’s a light color with a black outline. Even if the ink dries, it still is very easy to erase or mix in if lighter colors touch it.
If you need to draw your image first before starting to color, you can do this with pencil. Yes, you can draw right on the board! Pencil will erase easily with the same spray that takes off the marker. Draw very lightly with pencil, color in with your chosen color, and then draw over your outline with black, and there is a clean, colored image!
These are a few ways to make you a dry erase marker expert! If you want to learn more about making the most out of the whiteboards in your office, attend one of our visual note-taking workshops!
Get how-to-draw tips sent straight to your inbox!
Sign up and we’ll send you updates when new workshops, blogs, and more learning opportunities become available.
How to Properly Clean & Maintain Your Dry Erase Board
Between brainstorming sessions, random acts of doodling, and non-stop note taking, you’re probably interacting with your whiteboard on a daily basis. Just like hardwood floors and granite countertops, proper care and maintenance is required to help dry erase boards stay in top shape. In an effort to help you keep your whiteboard in tip-top share, we’ve put together this how-to guide for cleaning and maintaining your dry erase surface.
For starters, here’s the list of cleaning solutions you should avoid cleaning your whiteboard with:
Do not use:
- Any standard kitchen or bathroom cleaner, industrial cleaner, or solution containing isopropanol alcohol.
- Coarse or granular cloth like paper towels and toilet paper.
The reason for avoiding these solutions is rather simple: you want your board to maintain a high level of performance. Formulas that contain high levels of isopropanol alcohol and other high-toxicity cleaners can cause damage to the surface by forcing dry erase markers to have trouble sticking to the surface. Dry erase markers are made up of three components: colored pigments, a solvent, and a polymer. The polymer provides the ink with the capability to stick to the surface, while the solvent—which usually comes in the form of alcohol— helps the ink dry. Cleaning your whiteboard with a substance that contains a high potency of alcohol can alter the reaction the marker has with the board by either eliminating the dry erase capabilities of the board completely, or leaving behind notable stains.
The same goes for coarse paper materials like toilet paper and paper towels. While they may seem smooth and harmless from an initial glance, certain brands have a tendency to scratch steel and glass surfaces under the proper set of circumstances. That’s why it’s best to just avoid cleaning with those products entirely.
To provide the best care for your dry erase surface, you’ll want to clean your whiteboard at least once a week. This includes wiping the board with an eraser, as well as some form of lint-free wipe (be it a towel or whiteboard specific wipe, it is entirely up to you. ) Lint-free materials are the optimal cleaning tools for cleaning dry erase surfaces, as they provide minimal scratching to the surface in addition to collecting marker residue that has been left behind. It is important to note that marker residue that has been left behind for a prolonged period of time may cause damage to the dry erase surface.
As far as cleaning solutions are concerned, we recommend using Magnatag’s own brand of board cleaner, as this is what all of our whiteboards are tested with. But regardless of which solution you end up with in the end, you’ll want to make sure it doubles as a whiteboard conditioner. Whiteboard conditioner is an oil-based solution that maintains the integrity of the dry erase surface. In order to prevent the ink from sticking to the surface of a whiteboard, dry erase boards rely on the reaction between their surface and the oily polymer found in dry erase markers. The oils found within the polymer counteract with the porous surface to make the ink slippery, preventing the ink from coming in direct contact with the board. The oily nature of whiteboard conditioner ensures that your dry erase board will maintain a slick surface and reinforce the reaction between the surface and ink. It’s recommended that you condition your board just as regularly as you clean it.
If you’ve forgotten to take notes, fear not! We’ve put together a little checklist covering everything we’ve mentioned thus far:
4 Tips For Cleaning Your Whiteboard:
- Avoid cleaning your whiteboard with standard kitchen or bathroom cleaner, industrial cleaner, or solution containing isopropanol alcohol, in addition to Coarse or granular cloth like paper towels and toilet paper, as they tend to deteriorate the dry erase surface.
- Clean your whiteboard at least once a week.
- Wipe your whiteboard with both an eraser, as well as some form of lint-free wipe, as they provide minimal scratching to the surface in addition to collecting marker residue that has been left behind.
- Use a whiteboard cleaning solution that doubles as a whiteboard conditioner, to further prevent your whiteboard from stains and ghost marks.
White Dry Erase Board Headquarters: Menu To Personalize Whiteboards
Custom WHITEBOARD MENU – Any Frame Style – Any Size – Any Color
Since 2001 we have been building custom magnetic and non magnetic dry erase boards. We make them one at a time for customers in all 50 states with sizes ranging from 6 x 6 inches to 5 x 16 feet.
We also supply education, hospitality and corporate clients.
Use our Quick Shop feature for Framed White Dry Erase Boards
See Every Available Custom White Dry Erase Board Frame In Your Exact Size.
Simply Enter Your Long And Short Side And Select Your Color
To Make A White Board With Any Frame Select The Small White Dry Erase Board Picture
We Guarantee Safe Delivery
Hundreds Of Frames
Choose Narrow or Wide – Style and Color
Make Any Size
6″ x 6″ To 98″ x 52″
Sort by price or width of frame.
Toll Free: 888-208-4848
Request A Quote
We Guarantee Safe Delivery
Very Large and Very Small Dry Erase Boards
Need Material Only ?
Custom Wall Decor Since 2001
Have Time? Browse Our Detailed Dry Erase Board Menu Below
Hundreds Of Custom WhiteBoard
Each frame can create 5 Types of Wallboards.
To Make A Dry Erase Board With Any Frame Select This White Board Image
Enter Your Mounting Direction And Size Then Proceed To Checkout.
Create A Personalized Custom White Dry Erase Marker Wall Board With Your Content
Unlimited possibilities with Custom Header White Dry Erase Boards.
Add Your – Logo – School – Business Or Personal Name To Any Custom White Board. All Header Dry Erase Boards Are Made To Order. We like to communicate with the end user to assure we create exactly what you have in mind
Contact Us With Your Personalized Marker Board Design Ideas Toll Free: 888 208 4848
Header Combination White Board French Bulletin Fabric
Create A Unique Marker Board Combination
The possibilities are endless. Use fabric to add style to any combination board – Then ribbon and brads to create a Memory Board – Personalize with a custom header.
Header dry erase boards can be used at home school or the office.
Request A Quote
White Marker Boards
Header And Subheaders
Add a professional look with a custom combination dry erase board. We can create a unique board to fit your work flow.
Consider any combination of a header – subheaders and a footer to display your information.
Request A Quote
Custom Header Marker Boards Home Office School
Custom Header White Boards
Personalize your family room or kitchen – a childs room – the waiting room of a business – an office lunch room. or school hallway.
Request A Quote
We Make Specialty White Dry Erase Boards
Special Marker Board Products
CUSTOM WHITE DRY ERASE MARKER BOARDS MADE TO YOUR SIZE
Let us know if we can help in any way.
The Svoy Les company produces a wide range of sawn timber and building materials.You can buy any kind of building or finishing material made of wood from us, including high quality planed boards.
Dry planed board produced by “Svoy Les” is a dry board, which is processed on innovative woodworking equipment simultaneously from all sides, which provides ideal geometric proportions of the finished product at the output.
Having our own production base allows us to set affordable prices for planed boards, which makes a purchase possible for every resident of Yaroslavl and other regions.At the moment, planed board is considered one of the most demanded materials due to its high performance characteristics, environmental friendliness, practicality, versatility, as well as due to its affordable cost.
In the company “Svoy Les” you can always buy a planed board 20 * 140 mm and 100 * 20 mm, as well as a product of any other standard size that you need. The production is carried out from high quality wood, which is pre-dried, therefore it has stable characteristics.The product complies with all established standards, has a perfectly smooth surface without irregularities, which guarantees a beautiful appearance of the material.
High aesthetic characteristics of the planed board from the Svoy Les company make it possible to use it for any purpose: both as a finishing material and for the manufacture of furniture. In this case, it is necessary to take into account the type of cut that we use in the production of planed boards: radial and tangential. Radial cut provides a more uniform product, which makes it possible to use it for the production of luxury furniture.With tangential sawing, an arched pattern is obtained on the surface, so this type of planed board can be used for the production of high quality furniture (not elite). Also, the planed board 20 * 140, purchased from our company, is suitable for the manufacture of windows, interior doors and other structures.
Specialists of our company carry out the manufacture of wooden facades, you can always buy a bar and mastic from us, as well as buy insulation in Yaroslavl at an affordable cost.
Call us at the phones indicated on the website and get all the information you need!
Dry planed board 200x50x6000. Price for one cube -1m3, price for one piece.
Dry planed board 200x50x6000. Price per piece , price per cubic meter . Sold by the piece.
Important to know! Dry planed board, clean calibrated size 200x50x6000mm is not standard in the production of planed dry products , for the reasons listed below:
In the production of dry planed boards , non-standard sectional dimensions of edged boards of natural humidity 210x60x6000mm are used.After processing (heat treatment in a drying chamber up to 14-16% humidity and cutting on a machine), the following size is obtained in cleanliness – 200x50x6000mm. This must be taken into account in construction, when buying planed dry material, because non-standard sections are 20% more expensive than standard ones.
- before buying, you must specify the availability of qty. on retail space, because this section is a rarity on the dry planed material market.
Pricing section in tabular form.
|Photo Section Length in mm.||Number of pieces in 1m3.||Price per board (pcs)||Price per cubic meter (1m3)|
Question of site visitors: – what quality do we ship? See the answer in this video until the end. Quality review before loading on board.
Calculations of the consumption of a planed board with a dry section of 200x50x6000mm.
|Board length in meters m.||One plank covers an area of m2||One cubic meter m3 covers an area of m2||In one cubic meter m3 number of boards pcs.||In one cubic meter m3 running meters p.m.|
Tolerance of moisture content of the finished product . GOST 8242
|Photo||Chamber drying, as a technological process, is divided into the following stages.||Moisture percentage of the given section|
– initial moisture-heat treatment;
– wood drying;
– intermediate moisture-heat treatment;
– final moisture heat treatment;
– wood drying;
– air conditioning
– drying 2 weeks
Important! How is the verification of the declared characteristics of a given section for the customers of the site carried out online.
For a detailed study of the verification conditions, I ask the visitors of this page to follow the link I indicated here – https://torg-les.ruprom.net/a223565-proverka-tehnicheskih-harakteristik.html
Since I clearly explain with the help of a photo how checks are carried out to the customers of the site. I determine the dimensions of the section, its% moisture, calculate the error in measurements for this section. Full check of a dry planed board with a section of 200x50x6000mm.Net size.
Deliveries of planed dry boards with a thickness of 50mm and the work of the site customers.
Dry planed board 200x50x6000 :
The main purpose of the board of this section is intended for the construction of the rafter part of the roof, it is also called “Rafting board”, sometimes, as an alternative, where it is necessary, as a reinforcement of the roof structure, “Rafter bar 150x100x6000mm” is used.
Has no deformation along the entire length because it was sharpened on a four-sided machine and has a perfectly smooth and even calibrated surface on all four sides. Where the deviation is 2mm. along the entire length and width of the board are not permissible
Undergoes chamber drying, where it has a tolerance of up to 16-18% in terms of humidity.
Only after that it is allowed for further processing, shaving.
Planed dry larch board
Dry planed larch board
Dry planed larch board
Planed dry larch board
A planed board is made from an edged board by additional processing, planing on machines, as a result of which the surface of the board becomes smooth and the shape of the section is correct.
Sliced board is a high-grade category of lumber used in many areas of construction and interior decoration. Thanks to careful processing and grinding, such a board is free from roughness. At the same time, the main advantage of such a board is that it is made from well-dried wood, which means it retains its qualities for many years without losing its attractive appearance.
Larch planed board is especially popular.The natural properties of this wood make it a versatile solution for any construction and finishing tasks. First of all, larch is valued for its strength and moisture resistance. Such products do not require additional processing, and also perfectly resist biological, natural, climatic influences. The concentrated content of gum in the composition of such wood provides its excellent antiseptic properties, as well as resistance to the spread of bacteria and fungi.
Sliced board is mainly a finishing material, therefore it is actively used where a high surface quality is needed – in particular, when decorating walls, laying floors and ceilings, and making furniture.
Dry planed board is a material with a perfectly smooth and even surface and precise dimensions, which has an aesthetic appearance. Such boards do not change their shape and do not crack. The material is used for the final finishing of surfaces, used for decorative purposes, also in furniture production. The price of a planed board is correspondingly higher than that of an edged board, since the quality is correspondingly higher.
In addition to construction purposes, dry planed larch board can be used in furniture production, which is facilitated by a beautiful pattern, wood structure, as well as covered with different shades of wood.
People bought with this item
Dry board is the highest quality material
Dry board is the highest quality material that is used in construction for decoration and construction works. For its manufacture, raw wood is required, timber and boards are placed in a special room, where they are dried up to 10-12%. The prepared building material is stored in rooms with minimal humidity. After drying, the dry board passes through the shavings, which gives it a perfect smoothness. If, having bought a board, the owner is not going to use it immediately in construction, then it should be stored in a room with good ventilation. The thickness of the dry board is on average from twenty to fifty millimeters, the width reaches two hundred millimeters.When purchasing a dry board, you should carefully read the percentage of its moisture content, it should reach from eighteen to twelve percent. This board is so far unique in its kind and has no analogues.
Differs from a regular board in that a dry board is more durable and reliable. A board that contains a minimum of moisture will not darken, deform, crack and rot. The reason for the appearance of cracks is improper self-drying of the wood. The thing is that during drying, the inner layers of the wood may not completely dry out, so the board begins to deteriorate over time.Drying the board yourself is very difficult.
Dry board is used in various construction works. Ideal for floors and fences. It is often used in the construction of cottages, saunas and summer cottages. Depending on what it is used for, you can take several types of dry boards – timber, board, slats and bars. Well-made dry planks are used to make furniture and are also used in the decoration of river and sea vessels.
There are several types of dry boards:
The first type is characterized by a flat surface.This is done through the use of coarse planing. Moderately smooth.
The second kind – the bases are the same as in the first kind, the difference is in perfect smoothness.
A dry board that has been treated with antiseptic compounds under strong, high pressure is called impregnated. It excels in durability, high resistance to environmental and weather factors, and also has good wear resistance. In the manufacture of dry boards, Siberian larch is often used, which in many respects is better than oak, and in some cases even surpasses it.
When purchasing and preparing everything you need for construction, you need to clearly know what type of wood is right for you. If time permits and there is little finance for the construction site, you can buy boards of natural moisture and dry them yourself. And if you need to start building immediately, then you should buy dry wood materials that have been processed in a special dryer. Planed dry boards are more expensive than non-planed ones, so if you want to save money, then the second option is worth choosing.Non-planed boards go through a drying stage, like planed ones.
Non-planed board is used in construction work, most often it is used in finishing work, construction of frame buildings. The advantage of such a board is that it is immediately ready for use, without requiring additional work with it. The choice of wood grade depends on your specific construction work. The non-planed board has perfectly proven itself in the construction of private houses and structures. Ideal for chores, fence construction and any decoration.
If you need to lay the floor in the house, then you should choose a floorboard for several factors that characterize the quality of the wood. The most important thing is the connection of the boards to each other, so you can save yourself from additional installation, and durable operation of the floor. The floorboard must not have any cracks or chips. A dry board is a good option.