Cushion inner sizes: Amazon.com: Pillow Inner/Cushion Insert, Various Standard Sizes 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, 22 inch, 24 inch, 26 inch etc Cushion Core Polyester Filling Soft Home Decor (30x45cm (12×18 inch)) : Home & Kitchen

Содержание

How much bigger should a cushion cover be than the cushion?

Size Matters

To do this you need to use an insert that is actually bigger than the cushion cover. We recommend: for square cushion covers you use an insert that is about 5-6cm or 2″ bigger than the cover. for rectangular (lumber) cushions you use an insert that is 2-3cm or 1″ larger than the cover.

Click to see full answer


Regarding this, should a cushion cover be smaller than the cushion?

To get the best look and fit for your cushions, covers should always be slightly smaller than the cushion inner. For a cushion inner 45cm x 45cm, the actual size of the cushion cover should be around 42.5cm x 42.5cm.

Likewise, how big should cushion pads be? These include a small square size 45 x 45 cm and a larger square size 60 x 60 cm. These are the sizes you would mostly use for your sofa or bed.

However, it is important to note the size of the cushion cover before you buy it online to ensure that you can find a suitable cushion insert to go inside it.

Also asked, should cushion pads be bigger than cover?

Expert tip: always choose a cushion pad that’s the same size or one size bigger than your cushion cover to ensure extra plumpness and comfort. Never go for a cushion pad smaller than your cover as you’ll end up with empty corners where there’s no filling – overstuffed looks and feels much better.

How do I calculate how much fabric I need for a cushion?

One piece of fabric 54 inches wide and 16 1/2 inches long produces two cushion pieces. If you need more cushion pieces, multiply the number of sets by the cut length. For example, if you need eight cushion pieces, multiply the cut length of 16 1/2 by 4 and divide by 36 for the number of yards of fabric.

Home & Garden Home Décor Pillows Nautical Home Décor Pillows 70 x 70 cm Hollow-fiber Pumped Cushion Inner/Fillers Cushion Inserts/Pads 28″



Home & Garden Home Décor Pillows Nautical Home Décor Pillows 70 x 70 cm Hollow-fiber Pumped Cushion Inner/Fillers Cushion Inserts/Pads 28″

We are the manufacturers of Cushion Inners and we are using 100% Virgin Hollowfibre,HOLLOW FIBER CUSHION PAD VARIOUS SIZES HOLLOW FIBER, Cushion pads are available in the following sizes,Save 20% on Your First Order,Get the product you want,Hot-selling products,Discover tens of thousands of new products., Cushion Inserts/Pads 28″ 70 x 70 cm Hollow-fiber Pumped Cushion Inner/Fillers, 70 x 70 cm Hollow-fiber Pumped Cushion Inner/Fillers Cushion Inserts/Pads 28″, Inserts/Pads 28″ 70 x 70 cm Hollow-fiber Pumped Cushion Inner/Fillers Cushion.







such as an unprinted box or plastic bag. See the seller’s listing for full details.

See all condition definitions : Size: : 28×28″ , Material: : Hollow Fiber: Main Colour: : White , Type: : Cushion Pad: Shape: : Square , MPN: : Does Not Apply: Colour: : White , Brand: : Unbranded , 。, unopened, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, unused, Hollow-fiber Pumped Cushion Inner/Fillers Cushion Inserts/Pads 28″ (70 x 70 cm). HOLLOW FIBER CUSHION PAD VARIOUS SIZES HOLLOW FIBER. Cushion pads are available in the following sizes. We are the manufacturers of Cushion Inners and we are using 100% Virgin Hollowfibre.. Condition:: New: A brand-new. undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store.

70 x 70 cm Hollow-fiber Pumped Cushion Inner/Fillers Cushion Inserts/Pads 28″


Mando de sustitución para FUJITSU AR-RAE1E, New Primitive Black Star PARDON THE MESS CHILDREN Burlap Decorative Mini Pillow. Kit Escova Lateral Para roborock S50 S51 S55 S5 S6 T6 E2 E35 S60 S61 Aspirador De Pó, 12 pack 180hr CHRISTMAS by the BEACH Scented Aroma Oil Burner ECO CANDLE MELTS, 70 x 70 cm Hollow-fiber Pumped Cushion Inner/Fillers Cushion Inserts/Pads 28″

, 4x 1MB 30-Pin 3-chip Parity 70ns FPM 1Mx9 Memory SIMMs 4MB RAM Apple Mac PC. Details about  3D Butterfly Flower R64 Business Wallpaper Wall Mural Self-adhesive Commerce Amy, 7/8″ THICK WALL CLEAR PVC TUBING PLASTIC FLEXIBLE WATER HOSE PIPE TUBE 22.0mm, Lamp Amber LED Night Light for Nursery Bedroom Night Lamp.70 x 70 cm Hollow-fiber Pumped Cushion Inner/Fillers Cushion Inserts/Pads 28″. 1/3/5 STORAGE VACUUM BAG CLOTHES BEDDING ORGANISER UNDER VACUM BAGS S M L XL XXL.


70 x 70 cm Hollow-fiber Pumped Cushion Inner/Fillers Cushion Inserts/Pads 28″

70 x 70 cm Hollow-fiber Pumped Cushion Inner/Fillers Cushion Inserts/Pads 28″

Cushion Inner/Fillers Cushion Inserts/Pads 28″ 70 x 70 cm Hollow-fiber Pumped, cm Hollow-fiber Pumped Cushion Inner/Fillers Cushion Inserts/Pads 28″ 70 x 70, 70 x 70 cm Hollow-fiber Pumped Cushion Inner/Fillers Cushion Inserts/Pads 28″.

Cushion Pad | woolroom

Our cushion pads are beautifully made with 100% British traceable wool filling and covered with high quality natural cotton. Generously filled with beautiful soft British wool, and because of the way wool holds its shape you’ll find our cushion pads offer greater comfort and support, and won’t require constant fluffing to keep your cushions looking great.

Wool cushion pads make a real change from feather cushion pads, which tend to leak feathers after a while and require constant plumping. They are perfect for anyone that suffers from allergies because of wools anti-bacterial properties. A natural, chemical free option for those looking to upgrade their homes to a long lasting and natural quality product.

Sizes


We offer a wide range of sizes for our cushion pads;

  • 28 x 28cm (150gsm filling)

  • 30 x 30cm (175gsm filling)

  • 30 x 50cm (330gsm filling)

  • 40 x 40cm (345gsm filling)

  • 45 x 45cm (460gsm filling)

  • 50 x 50cm (570gsm filling)

  • 60 x 60cm (1000gsm filling)

  • 65 x 65cm (1000gsm filling)

Don’t see the size you’re looking for or do you qualify as a trade customer?

If you would like a bespoke size of cushion pad then please feel free to get in contact with us and we can provide you with a quote. Please note that there will be a minimum order quantity for bespoke sizes.
Please feel free to contact us for trade applications.

Construction


100% British wool filling with a high quality natural cotton outer.

Cleaning Instructions


Our cushion pads are entirely natural, so shouldn’t need cleaning often (simply airing the product can do it the world of good). When you do come around to cleaning it, it would need to be taken to a dry cleaners. We highly recommend Johnson Cleaners, who have a fantastic, non-toxic service called Green Earth.

Throw Pillows: A Guide to Sizing & Inserts

It’s no secret I love throw pillows. I think most interior enthusiasts do! They can be the pièce de résistance that makes a room feel finished, as well as easily switched out to change the whole feeling of the space.

As a former interior designer + several years experience running an industry fabric showroom under my belt I’m quite familiar with pillow talk. If you’re thinking about purchasing or DIY-ing pillows for the change of seasons, you may want to check out the guidelines below to make sure they look their best!

Types of Inserts:

Feather & Down – Down fills are typically best as they’re all around loftier, and can be fluffed overtime to maintain their shape and volume. Tip: The more down content there is in the feather/down ratio, the better!

Synthetic Spun Polyester – Think craft store inserts. Synthetic fiberfill is generally a lesser quality insert as they flatten, lose their shape, and become lumpy overtime. I almost never use them, except for in these tufted pillows! In this case, the synthetic insert stayed in place and proportional in the pillow better than down would have.

Down Alternative – Though down alternative is technically still polyester fill, its composition is such that it mimics down’s lofty clusters, making it a great down stand-in for anyone with down allergies. Crate & Barrel has a good down alternative pillow option.

Outdoor – Usually filled with water & mildew resistant acrylic or polyester fibers to hold up to the elements.

Throw Pillow Sizing:

Typically we see ready-made pillows in stores at 18″ squares, but it’s no secret designers hate wimpy pillows which is why they often have them made custom. If you’re up to the task of sewing your own pillows, you might want to consider opting for 20″-22″ size, as it’s a bit more of a luxe designer look. My personal size preference is 22″ square. Some designers even go up to 24″ squares depending on the size of the sofa or chair.

Square pillows are probably the most common shape, but there are tons of other shapes out there too: lumbar, circle, bolster, etc. Don’t be afraid to mix and match sizes and shapes like Amber Lewis of Amber Interiors has done in the space above.

In terms of pillow insert sizing, the general rule of thumb is to use inserts that are 1″-2″ larger than your pillow cover. (I usually go 2″ larger.) So for example, with a 22″ square cover, use a 24″ square insert. Going a step larger with the insert makes for a more voluminous, high end look.

Things to Consider When Choosing Throw Pillows

Photo Credit:  Seventy Nine Ideas | Amber Interiors | Rebecca Atwood

Follow

Like this:

Like Loading…

Cushion Inserts Availbe Online & In-Store

How to Select a Cushion Insert?

Many customers prefer buying cushion inserts these days. Not only are cushion inserts affordable, they can easily be replaced once it has lost its shape due to repeated use. Customers can count on a large collection of cushion inserts at Spotlight, giving them the perfect fit for bedroom, decorative, or chair cushions.

Curious how you can choose the right cushion insert for your needs? Read through our useful guide to cushion inserts below to get the most from your new cushion insert!

How Do I Determine the Size of the Right Cushion Insert?

Before you look at some of the details of cushion inserts, it is essential to look at the basics first. One of these basics is the cushion insert size. There are many different sizes available, but you can usually determine the right size easier by looking at the cover the cushion insert must fit.

Measure your cushion cover horizontally and vertically to determine its correct size. Then, you can proceed to determine the size of your cushion insert, which is subject to how you like your cushions. For example, if you like your cushions to be plump, it is a good idea to choose a cushion insert that is five centimetres bigger than the length and the height of the cover. For example, if you have a cover that measures 45 cm x 45 cm, you should choose an insert of 50 cm x 50 cm.

Customers can choose cushion inserts that match the size of their cushion covers. However, by choosing the same size, the resulting cushion will appear less plump and filled out. So, at the end of the day, it comes down to personal preference.

What Are the Different Types of Cushion Inserts?

Much like cushion covers, there are different types of cushion inserts. The type of the cushion insert is determined by the material it is made of. To give you a thorough overview of these materials, we have created a summary of common cushion insert materials below.

Down Cushion Inserts

Cushion inserts made from down feathers tend to be the priciest option. Down is a material made from duck and goose feathers, which immediately explains why it is more expensive than most manmade materials.

Down inserts provide some benefits to your cushion. Firstly, the cushion insert easily changes shape – this means they can make wonderful decorative cushions. Down inserts also feel quite comfortable, so these inserts are also used for sleeping pillows.

There are some downsides to down inserts though, since they are not suitable for people with allergies. They are also hard to maintain, since feathers are more difficult to fluff after they have been washed.

Foam Cushion Inserts

The foam cushion insert is made from a material called polyurethane. Since this is a manmade material, it is quite affordable compared to down cushion inserts. However, with this type of cushion, the density of the insert will determine its longevity. So, if you want to make sure these foam inserts last, be sure to choose a denser insert.

Polyester Cushion Inserts

Another popular option is the polyester cushion insert. The polyester fibres are softer than the foam insert and retain their shape better over time, so many people prefer a polyester cushion insert if their budget does not allow for a down cushion insert.

We must also mention that polyester cushion inserts are hypoallergenic – this means they can be used by anyone with allergies. Therefore, it is certainly not a stretch to say that polyester cushion inserts are the perfect alternative for down cushion inserts, which often cause allergic reactions.

What Size Should Foam Be Cut At?

What Size Should Foam Be Cut At?

This is a question we get asked on a daily basis, so we thought we would try to give some advice as to just what size foam should be cut at to fit your covers.

There is not a set formula for every case, it depends on the type of foam you are using, whether the foam has a polyester wrap, how much ‘give’ there is in the cover and whether the foam is going on a drop in seat.

Let’s deal first of all with a drop in seat. These are found primarily on dining chairs. The finished seat pad has to drop in to a wooden frame which will be a very close fit on the seat pad. In this case your foam should be the size of the board or the frame that it is going on. Any extra would mean that the seat pad would not drop in to the space available for it. With drop in seats the fabric cover is fixed with staples/tacks to the board or frame.

If you have any other type of seat pad where the fabric is fixed to the board or frame, as opposed to the foam going in to separate cover (i.e. one with a zip in it) then we would suggest having the foam cut slightly larger than the board or frame just so you don’t feel the edge of the frame/board through the fabric.

In all other cases the finished cushion should be larger than the cover it is going in to. If the foam is having a polyfibre wrap on it then you can cut the foam the exact size of the cover and the polyfibre wrap will give you the extra size required to make the cushion look nicely filled.

If the foam is not having a polyfibre wrap (the foam can have just a stockinette liner but that is a different matter entirely and is not taken in to consideration when measuring) then the foam should be cut slightly larger than the cover size. The softer the foam the more can be added to the measurements of the cover size. For instance when using our medium/soft or RX Flex foams we could easily add 0.5″/1cm to the length, width and depth measurements of a seat pad sized cushion (dining chair size) and for larger cushions over 1m long we could add 2cm to the length. If however you are using our medium firm or high firm foams, then these do not compress as much as the softer foams but even so adding 1cm to the length, width and depth measurements of the cover would produce a nice full looking cover.

With the firmer foams we would only add 2cm to the length when the cover measurement was around 2m.

Summing up them; if you have a cover that measures 18″ x 18″ x 2″ (46cm x 46cm x 5cm) then you should either order your foam those sizes and order a 4oz polyfibre wrap on the foam or order the foam 18.5″ x 18.5″ x 2.5″ (47cm x 47cm x 6cm) when having no polyfibre wrap. Cushions that have a polyfibre wrap on them have a more rounded appearance on the corners rather than just plain foam which has more of a squared/block look. Either is fine, it is just a case of which one suits your style of furniture.

You need to be aware that foam cannot make your cover any larger than it is when stretched but If you just order your foam just the size of the covers it can look very baggy.

You can of course send us your covers for foam to be cut the correct size but the hints given above should help you make the correct decision regarding the sizes to order.

Cushion Fillers Available for Wholesale Purchase – View Today

Have you ever wondered how to save on the money and time by making use of the scatter cushion inners online? In fact, many people have started making use of these cushions for the comfort and ease that they offer. The best part about these cushions is that they are very affordable and at the same time can be easily afforded by all. Therefore, if you want to buy a cushion for your home, then you can choose between different sizes and varieties that are available today. Apart from offering comfort, they also add to the decor and style of the room. If you feel that you do not know how to take the best decision for the cushion for your home or office, then you can simply log on to the internet and search for the best sellers of cushions that are sold with the specification of the buyers.

Today, one can find that there are lots of websites that sell the latest variety of cushions inners online. Many of the manufacturers that are dealing in the business of manufacturing and selling of cushion inners have started offering their products through the online mode. Therefore, if you want to get the best deals for your cushion, you should visit their official website and check out the various products that are being offered for sale by them. You can also compare the prices of different cushions that are being offered by different websites. This will help you get the best deal and you can save a lot of money and time as well.

In addition, if you are looking for the right cushion for your needs, then you can make use of the cushions inners information that is available online. This will help you to select the best inner cover that will be perfect for your requirements and help you save a lot of money as well. Apart from providing comfort, they also add to the decor and style of the room. Therefore, if you want to buy a cushion for your home or office, you should look for the best cushion inners and get it delivered at your doorstep. Moreover, there are lots of retailers that are online and dealing in the business of selling cushion inners covers. You can visit their official website and look for the varieties that are being sold by them or you can even compare the prices of different sellers and choose the best deal for yourself.

90,000 what are the shapes and sizes of pillows, how to choose them?

What is a good pillow, which pillow to choose? What should you look for when buying a pillow for your sleep?

In the photo:

Favorite color . Decide which is more important to you: fall asleep quickly or wake up easily. Depending on this, choose the color of pillowcases and other bedding. Neutral and dark shades lull you to sleep, while bright, rich colors give an extra boost of vigor in the morning.You don’t have to choose pillowcases of the same color – arrange a rainbow in your own bed.

Pictured: Cozy 54 pillow cover from Zoeppritz.

Pillow shapes

To answer the question “how to choose a pillow”, first you need to understand what kind of pillows there are. You need to be guided here not only by your own taste, but also by the size of the pillowcases in the set of your favorite bed linen. The length of the pillow (or pillows if two people sleep on the bed) should not exceed the width of the mattress. Good pillows should not exceed the width of a human shoulder (about 14-15 cm) in height.

Low pillows should be discarded for those who snore in their sleep. High pillows are also recommended for full, broad-shouldered and people with high blood pressure.

Pillow sizes

Good sleeping pillows are rectangular or square. Large items measuring 70 × 70 cm are almost never found – they were replaced by elongated pillows 50 × 70, 40 × 60 cm and square pillows 50 × 50, 40 × 40 cm.Russian manufacturers began to focus on the European standard (the most common in Italy and Spain is 50 × 70 cm). And nowadays there are more and more sets with pillowcases of this size.

In the photo:

Europeans traditionally use several sizes of pillows in bed at once, the same set of pillowcases is included in the bed linen set. In Russia, they are guided by one standard pillow size.

Orthopedic pillow filler – latex and polyurethane foam. Models with natural latex filling are usually twice as expensive as polyurethane ones. They serve up to 10 years, the tick (as in feathers) does not live in them. However, latex sometimes causes itchy skin; it is non-hygroscopic. Therefore, all-latex pillows are contraindicated for people with excessive sweating. In polyurethane foam pillows, memory foam is often used. Similar technologies were previously used only in burn centers: the filler under the weight of the body gently flows around the head, contributing to relaxation.

Pictured: anatomical pillow Air dream K 200 from Huelsta.

Orthopedic pillow

During sleep, the orthopedic pillow supports the spine and head in the anatomically correct position, relieves stress from the neck, and does not disturb the blood flow in soft tissues.

Various shapes of the orthopedic pillow are offered: two rollers of different heights, one roller, a rectangular pillow with a recess under the nape in the middle, or a pillow of a classic shape, but with the correct multi-layer “filling” (like a mattress).

If you suffer from insomnia, an orthopedic pillow will hardly help you: it will take some getting used to. Therefore, do not strive to buy an orthopedic pillow without medical indications – choose an ordinary good pillow for sleeping.

In the photo:

Orthopedic pillows with a heat-sensitive collar roller are able to adapt the shape to individual body contours.

Woolen pillows. For fans of “natural” options, we recommend pillows filled with sheep or camel wool. Unlike down and feather pillows, wool pillows are washable; models are hygroscopic and dry on their own, without additional “airing”. But wool, like down, quickly falls off. Therefore, it is used as the top layer, while the inner core is made of a “springy” material. Elite pillows are entirely made of granulated wool, which is resistant to creasing.

In the photo: greensleep pillow.

Pillow filler

The price of a pillow depends not so much on its shape (although orthopedic ones are traditionally more expensive), as on the filler.

  • Pillows with natural fillers are in great demand, because natural fillers such as buckwheat husks, bamboo, eucalyptus do not grow mites and other bacteria. In addition, for example, pillows with eucalyptus filling have a healing effect and are indicated for people with respiratory diseases and asthma.

    With regard to bamboo filler and buckwheat husk, these fillers are considered environmentally friendly and do not cause allergic reactions. Such pillows are excellent for air permeability and have an orthopedic effect, adjusting their shape to fit a person’s head. This means that during sleep you will not sweat and will feel comfortable.

  • Synthetic pillows The cheapest models are made of synthetic filling: polyester fiber is a hollow tube; its thickness determines the properties of the future filler – from the analogue of fluff to the analogue of wool.Sometimes the fiber is rolled into balls: such an elastic filling is less crumpled. There are good pillows filled with holofiber: they are hypoallergenic, keep their shape perfectly and “breathe” (provide free air circulation). Synthetic-filled pillows are easy to care for (machine washable) and have a long service life (9-10 years). The main disadvantage: because of their elasticity, they do not immediately take a shape that is convenient for you; some pillows creak slightly.

In the photo:

Pillows made of natural latex need good ventilation: that’s why hundreds of holes penetrate the surface of the filler.

  • Down Pillows Good down filled pillows are not cheap. A modern down pillow is made using an unusual technology: the down is split into “pockets” (it quickly restores its shape). Or the down pillow consists of several layers: harder under the neck, softer under the back of the head. In the outer layers, there is exclusively down (gives softness), the inner layers are a mixture of down and feather (has shock-absorbing properties). Absorbing moisture (sweat, saliva, tears), the feather pillow cannot dry on its own, and therefore mites quickly start in it.


Read also:


Buckwheat pillows. Buckwheat husk pillows are popular; cedar husk pillows cost about double the price. The main advantage of a good pillow made from natural materials: it takes an almost perfect shape around the head, which helps to relax the muscles, and, therefore, improve sleep. The disadvantage of a buckwheat pillow, in fact, like a latex pillow, is its unusualness.The rustling of husks will calm someone, and annoy someone.

In the photo: Naturalink pillow.

Manufacturers intensively “protect” the natural filler – they develop special bedclothes made of fabrics with increased hygroscopicity or with the so-called. thermal control – regulation of perspiration. Remember that only leading manufacturers properly sterilize and process down and feathers: cheap models from “craftswomen” can cause allergies. For hygiene reasons, it is better to replace the down pillow with a new one after 5-6 years.

  • Silk pillows are free from the shortcomings of fluff and wool – they are hypoallergenic, perfectly restore their shape, they themselves give coolness even on a hot day. The fiber can absorb up to a third of its own weight while remaining dry to the touch. Silk lacks elasticity in order to act as an independent filler – it is used in combination with other materials.

The article uses images
360.ru, naturalink.com.au, greensleep.com


How to choose a pillow?

Pillows with bamboo fiber filling can be safely called a fashion trend. For the production of this filler, young bamboo shoots are used. The airy, porous mass obtained after processing the split fiber has a number of extremely attractive properties. She:

  • hypoallergenic;
  • permeable, breathable without causing sweating;
  • is hygroscopic, instantly absorbs moisture and dries quickly, which is very valuable in the heat;
  • bactericidal, mites do not grow in bamboo viscose;
  • does not accumulate odors.

Natural filler made from eucalyptus fibers practically does not lag behind bamboo fiber in terms of health benefits. Eucalyptus fiber is obtained from the cellulose of the eucalyptus tree. This filler is also hypoallergenic. A product filled with eucalyptus fibers has deodorant properties and helps to get rid of unpleasant odors without accumulating them. Eucalyptus-filled pillows are hygroscopic. They absorb excess moisture, leaving the sleeping area dry and comfortable – an important quality for the summer season.Like bamboo fiber, eucalyptus filler has antibacterial properties. Molds, dust mites and microorganisms will not start in such a pillow, because eucalyptus essential oils actively fight germs and bacteria. Thanks to the hollow fiber structure, this filler is highly breathable, allowing the skin to breathe. Plus, eucalyptus-filled pillows are surprisingly durable.

Subject to the rules of care, such a product will last 7-10 years without losing its properties even after numerous washes.

Silk products are gradually gaining popularity among pillows with natural fillings. Inside them there is a refined silk fiber (silk), hypoallergenic and natural. For its chemical composition, silk was nicknamed “the second skin”; sleeping on such a pillow does not cause irritation or allergic reactions. A serious plus of silk pillows is durability. If you follow the simple rules for caring for the product, such a pillow will not lose its original shape for a long time.

Another type of natural pillow filler for healthy sleep is algal fiber.The filler for these pillows is obtained from kelp seaweed. These algae contain trace elements, among which iodine and potassium are especially important for the human body. During the transformation of raw materials into a soft, airy fiber, algae are not subjected to any chemical treatment and retain their unique properties. Sleeping on such a pillow will be both comfortable and useful.

The latest natural pillow filling material is latex. Latex has nothing to do with synthetics, it is made from the resin of tropical hevea, to which it owes its “shape memory” and hypoallergenic qualities.

To summarize, we cannot unequivocally give the palm to synthetic or natural fillers for pillows. Each of these materials has its own characteristics, advantages and disadvantages (for example, not everyone likes the smell coming from eucalyptus fiber), and therefore it is better to navigate when buying according to your own taste.

90,000 Answers to the main questions when choosing a pillow for sleeping – in our article


Our clients are often faced with questions of how to choose the right orthopedic pillow and where to start selection.For what parameters you need to select a pillow – read in our article.

Choosing a shape.

Orthopedic pillows are:

  • with one roller – for neck support

  • rectangular with two bolsters – to support the neck and head

  • with a notch under the shoulder – for those who are used to sleeping on their side

  • classic – without bolsters, shaped like a down pillow

  • in the shape of a butterfly – for any position during sleep, including on the stomach

  • anti-age pillows – an innovative form to protect against the appearance of wrinkles on the face.


The rectangular shape of the pillow with two bolsters has long been the bestseller among our customers. But manufacturers can also offer such shapes as a butterfly, a classic shape without rollers, a single narrow roller. These shapes do their job, for example the butterfly pillow is ideal for those who sleep on their stomachs, the classic pillow for those who are uncomfortable sleeping on bolsters.

Choosing the size of the pillow.

The pillow should not be too short in length – in this case, there is a risk of slipping off it in a dream. As a rule, pillow manufacturers set the length in the range from 40 to 60 centimeters.

As for the width of the product, its size varies from 30 to 50 centimeters. The size you choose depends on your personal preference. For our customers, a pillow with a length of 50 cm and a width of 30 cm is the optimal solution. These dimensions allow you to sleep “without rolling” off the pillow, as well as freely roll over on either side.

We select the height of the roller or the pillow itself.

This is the main parameter when choosing a pillow that will support the head and cervical spine in the correct position. A suitable pillow keeps the head in line with the body. This preserves the natural curves of the spine. Simple measurements will help you find out “your” height of the pillow. Measure from the base of your neck to the edge of your shoulder as shown in the picture below.It is this length that will be the height of the roller. The resulting measurement can be equal to the length of the shoulder or differ by plus / minus 1 cm.


Choosing the pillow material.

The filling of the pillow can be made of natural or synthetic material. Both varieties do their job well. The advantage of synthetic filler is that it will not cause allergic reactions if there is a tendency towards them.

The most important thing in the choice of material is the individual feeling, since each of the materials gives a different perception of it.

Consider the popular options for filling a pillow for sleeping:

  • Latex – gives the effect of elasticity and will appeal to lovers of high pillows, as well as those who are used to sleeping on their backs. This high quality natural material is made from the juice of the Brazilian hevea.
  • Polyurethane foam is a synthetic hypoallergenic, resilient filler, which is affordable. Moreover, a pillow made of such material lasts, on average, five years.
  • Viscoelastic memory foam is an environmentally friendly, breathable, durable, hypoallergenic material with a “memory effect”. In fact, this is a kind of polyurethane foam, but due to special additives, it is more viscous and softer in structure.

Also pillows can consist of buckwheat husk, polyester.

Most often, our customers choose pillows with memory effect, because thanks to this property of the material, you will not feel the pressure of the pillow.The special filler gently and gently conforms to the shape of the head and neck. Feels like your head is floating in weightlessness.

Determine the stiffness of the pillow.

A soft pillow – for those who are used to sleeping on their stomach: it reduces muscle tension, relieves pain in the cervical spine.

The medium firmness of the pillow is for those who are used to sleeping on their back: it can smooth out such imperfections as snoring and lower back pain.

Hard pillow – for those who like to sleep on their side: supports the natural curvature of the cervical spine.

Manufacturers rarely provide information on the stiffness of the pillow, because this parameter is subjective. Your pillow may feel soft, while your friend may find it too hard. According to the feelings of many customers, pillows made of viscoelastic memory foam are classified as soft and medium hard, but latex and buckwheat husks are referred to as hard.

What are the additional benefits of a pillow?

  • Removable zippered cover. Its presence will make it possible to wash the cover, check the condition of the pillow filler and add additional amount if necessary.
  • Massage effect. Achieved due to the special ribbed surface of the pillow.
  • Height-adjustable cushion bolsters. Included with such a pillow are additional removable blocks so that the rollers can be increased or decreased for maximum comfort.
  • Antibacterial properties. Will help protect the skin from irritations and pimples, and reduce the likelihood of unpleasant odors over time.
  • “Anti-age” technology. Pillows with indentations under the face that help protect the skin from wrinkles after sleep, which reduces the number of expression lines.

The more additional “chips” there are in your pillow, the more expensive its cost will be.

If you buy a pillow through an online store, pay attention to studying the characteristics of the product.On the Ortix website we have tried to collect the most detailed information so that you can choose the option that suits you!

90,000 Sizes of orthopedic pillows. How to choose the right orthopedic pillow by size and height

Healthy sleep is the key to well-being during the day. For a good rest in a dream, it is important to maintain the correct body position. An improperly fitted pillow can cause head, neck and back pain, fatigue and a broken condition.Prolonged use of a pillow that is too large or small can lead to back problems.

Orthopedic products are specially designed to provide maximum support for the neck (for example, with cervical osteochondrosis) and head during sleep. They relieve stress from the spine and help prevent deformity. Hypoallergenic materials do not absorb foreign odors and do not allow the spread of pathogenic microorganisms.

When choosing an orthopedic pillow, you cannot rely on the positive experience of friends.A suitable pillow is an individual thing. Its size depends on your weight and height, the degree of firmness of the bed, and the position in which you prefer to fall asleep.

Consider the features that should be paid attention to when choosing an orthopedic product for an adult and a child.

There are various shapes and sizes of pillows. For sleeping on your back, you can choose a classic shape, and for those who like to sleep on their sides, models with bolsters or a shoulder recess have been developed.

For adults of average build, models with a length-to-width ratio of 60×40 cm are suitable, and owners of a larger build can choose sizes of 70×50 cm or more.

From the age of two, the baby’s spine begins to actively develop, so it is important to ensure high-quality healthy sleep.

When choosing a pillow for a child, keep in mind that it should not be wider than the crib.

Recommended sizes for children’s orthopedic pillows vary by age:

  • 1.5 – 3 years: 29×25 cm, height – 3 cm;
  • 3 – 7 years old: 39×35 cm, height – 5 cm;
  • over 7 years old: 58×35 cm, height – 8 cm.

To find the height more accurately, measure the child’s shoulder and divide the value in half. {Banner_serefs}

For babies in the first months of life, stores offer different types of pillows:

  • Anchoring pillows are designed to hold the child’s body in the correct position;
  • inclined models (tilt angle no more than 30 degrees) provide free breathing and are safe in case the baby spits up. On such pillows you need to lay your head and upper body;
  • side cushion of two rollers fixes the baby’s body in a lateral position, ensures normal sleep for restless babies;
  • “butterfly” has a depression in the middle and lateral ridges, ensures the correct position of the spine in children from 2 months.

Before purchasing an orthopedic pillow for a newborn, you should consult a pediatrician.

If a baby has no health problems and sleeps peacefully, he may not need a pillow for up to a year. Most often, doctors do not recommend using pillows earlier than 3 months, but for some problems, such as torticollis or hypertonicity of the neck muscles in a baby, anatomical products can positively affect the health of the baby.

The approximate size of a baby pillow is 30×20 cm.Be guided by the recommendations of doctors and your child’s behavior. If you notice that with a pillow he began to sleep more restlessly, often cries, fusses in his sleep and tends to lie down in a different way, then the product is not suitable for the baby.

It is necessary to select a product on which only your head and neck will be located. Huge pillows that fit the shoulder and even part of the torso bring a lot of problems with the spine.

Try to lie down on a pillow. If the model has bolsters or shoulder notches, make sure that these parts are positioned in accordance with your anatomical features and do not cause discomfort.

When buying, consider the size of your bed. If you purchase a pillow that is too large, it may be necessary to have to keep your legs bent, which can be uncomfortable instead of relaxing.

Height is one of the most important parameters, because it is this value that ensures the correct position of the spine during sleep.

The height should match the distance between the neck and the bed, so it is especially important to consider your favorite sleeping position.For a position on the back, a low product (6 – 10 cm) is suitable, and for a lateral position it is better to choose higher pillows (from 12 cm). Doctors do not recommend sleeping on your stomach: the natural curvature of the spine is disturbed and pressure is exerted on the internal organs, but if you cannot fall asleep differently, choose an almost flat pillow and always with a memory effect.

Height selection rules:

  • the head must be level with the body;
  • a bed with a soft mattress needs a lower pillow than a hard cover;
  • the greater the body weight, the higher the pillow should be;
  • in the lateral position on a soft mattress, you can choose a product with a higher roller, since part of the shoulder will “go” into the mattress;
  • if you constantly want to put your hand under your head, it means that the pillow is not high enough

Record your post-sleep state.If you feel neck and shoulder pain, then you need a higher pillow and a softer mattress. If you sleep restlessly and change your position frequently, choose a lower pillow. These tips work equally well for women and men.

On sale you can find orthopedic pillows with height adjustment (for example, the Trives Top-105 model), so you can choose the optimal height of the neck bolsters and adjust them for yourself. True, the price for such products will be higher.

Pay attention to materials and fillers. The height and degree of rigidity of the product depends on this. Most often, orthopedic pillows are made from highly elastic foam. The structure of this material allows you to adapt to the slightest curves of the body. Some products have a “memory effect”, retaining their shape. Another popular pillow material is buckwheat husk. This filler has excellent orthopedic properties. In order for the pillow to take the shape of the body, the husk must be poured freely.Items filled to capacity with filler will be too stiff and hard. When buying, ask the seller for certificates so as not to purchase a poor quality product.

Most often, manufacturers produce pillows with a height of 6 to 16 cm, and most people find a comfortable range of 10 – 14 cm. But this value is individual for each person. If you sleep on your side, the pillow should be the same height as your shoulder.

Pillows “with a wave” are equipped with two rollers of different heights: higher for lateral position of the body and lower for sleeping on the back.The height of the rollers, as a rule, varies from 8 to 14 cm.

In order to determine the required roller height, you must first measure the shoulder. It is better to use a measuring tape for this. There are two ways to measure your shoulder size correctly:

1 way. Start at the base of the neck and end at the edge of the shoulder. Add to this value 1 – 2 cm for the shoulder pushing of the mattress if it is soft. For example, if your result is 11 cm, a pillow with a height of 12-13 cm will suit you.Oscillation within a couple of centimeters is permissible.

2 way. Divide the width of the shoulders by two and subtract 1/4 of the circumference of your neck from the resulting figure. We get the required roller height.

Video: How to choose the right height of the orthopedic pillow

If it is difficult for a broad-shouldered person to find a pillow with a roller of sufficient height, you can use a terry towel wrapped around the pillow to achieve the desired level.

It may take several days to get used to the orthopedic pillow after using a regular pillow.The rule is that the selected product will have a preventive and curative effect in the fight against many problems of the spine. Sleeping on a quality pillow will bring complete relaxation and rest, during the day you will be full of vivacity and energy.

Inner cushion cover

The basis of a modern pillow is foam rubber combined with padding polyester. In the presence of padding polyester, the pillow lasts longer by about a year or two.Using a synthetic winterizer, you get an additional bonus in the form of comfort. And what’s important, it is cheap. The cost of the padding polyester and the work associated with its installation is approximately 3-5 percent from the final cost of the pillow.

The synthetic winterizer is a loose and mobile material. Despite the fact that the synthetic winterizer is glued to the foam rubber, over time it can get lost.This happens differently for different upholstery materials. Depends on the wrong side and the people who sit on these pillows. The synthetic winterizer may not go astray at all. But to minimize this chance, use an additional cover made of slippery fabric. It is put on a synthetic winterizer under the main fabric. This is rarely found in cheap furniture, but almost always in expensive furniture. Such cases are very expensive made with additional filling with down or holofiber.

What are these covers made of

The inner cover is always hidden. Therefore, in the manufacture of such cases, they are more guided by the price of the material and its strength. Here are the three most common materials that are almost always used.

Spunbond

It’s cheap stuff.It has different densities and is commonly used in the furniture industry. For inner covers low-density spunbond is used for back cushions. The load on such pillows is much less, than the seats. Therefore, given the price of spunbond, this is the optimal material for such pillows. For pillows in their sofas, it is used by such large manufacturers as Ikea and the holding’s factories. “March 8”.If you remember, they give decent warranty periods for their products. Material cost for a cover on an average pillow is 40-60r.

Synthetic lining

A more expensive option is the lining fabric that is used for clothing. As a rule, it is polyester. Such fabric is much stronger than spunbond and can be used to make seat covers.It is slippery and allows you to reduce the load on the padding padding polyester. We prefer to use this fabric for both seats and backs. Perhaps we are reinsured, but she has not let us down yet. The cost of material for a cover for an average pillow is 130-160 rubles.

Cotton teak

The most expensive option is to use 100% cotton fabric.This fabric can be found in furniture. the level of Baxter, Minotti and Zanaboni. I must say that this option is practically not used. You can find suppliers who offer fabric at a price of 150-200r. per meter. But as a material for inner covers, especially seats, this fabric is rather weak. Dense Italian teak costs 450-550 rubles per meter. It is more expensive than some upholstery fabrics such as Bora, Kiton and Madagaskar. Few customers see the point of using this liner.We purchase such material for a specific order.

When do you think about him

No matter how carefully you use the pillows, sooner or later you will want to refresh them. The first thing that comes to mind is washing. For washing, you need to remove the pillow from the cover. And no matter how simple it may seem, to do it without “knocking down” the synthetic winterizer, hard.An inner cover will greatly facilitate this process. Putting on a clean cover, by the way, will also be much easier. That’s what it is the main purpose of the inner cover.

Do I need it?

How necessary is an inner cover and can you do without it? Despite the obvious advantages, this issue is controversial.On the one hand, it is convenient. And when you do it “for yourself” – it is important. On the other hand, the pillow is becoming more expensive now, and the benefits will come later. As we already said, synthetic winterizer is cheap. For a medium-sized pillow, you need about one and a half meters of padding polyester. This is about 250r. And the cost of an inner cover for the same pillow will be about 800r. (work + fabric). It turns out that replacing a synthetic winterizer several times will cost less than sewing one cover.

True, you will have to change the synthetic winterizer yourself. If at all you will do it. This kind of work is too cheap to make sense. to take on it. We take this one only if there is something else with it. When we glue the synthetic winterizer, we use spray gun and industrial glue. But no one will buy such equipment to replace the padding polyester.Easier to sew it on needle and thread. It will take more time, but if you love handicrafts, it will even give you pleasure. In addition, most pillows are sewn from inexpensive upholstery fabric. Such fabrics are mainly synthetics, which the manufacturer does not recommend washing. Dry cleaning only. But compared to washing, dry cleaning is more troublesome. And not everyone will do it.

Summarizing the above, a simple conclusion suggests itself:

The cover serves for the convenience and longer life of the padding polyester.If you plan to use your pillows as long as possible, then ordering a cover has meaning.

But, if you are aiming to cut costs as much as possible, and you need pillows for 3-5 years, then you most likely do not need such a cover. The pillow will serve without it.

How to sew a pillowcase on a pillow with a wrap

Pillowcase is one of the elements of bedding that protects the pillow from external influences, while maintaining its integrity and aesthetics.One from the other, a pillowcase, may differ in size, shape and sewing methods.

If you are wondering – “How to sew a pillowcase on a pillow quickly and easily?” and want to get an answer to it in an easily understandable and detailed form, then we will try to help you with this. Let’s try on our fingers, step by step, how to explain to a student how to sew a pillowcase on a sewing machine, even without an overlock.

Immediately, we note that we will sew a pillowcase with a smell from a single piece of fabric.

From the means of labor we will need:

  • tape measure
  • scissors
  • needles (pins)
  • threaded sewing machine

Go to the instructions.

Step 1 – Determine the size of the pillowcase, which will directly depend on the size of your pillow.

The whole algorithm for sewing a pillowcase will be built on the example of a standard pillow 47 cm by 66 cm.For this pillow, a pillowcase 50 cm wide and 70 cm long is required. shrinkage of the fabric, both in width and length. You can determine the exact dimensions of the pillowcase, depending on the size of the pillow, here.

Step 2 – Cut out the required piece of fabric for our pillowcase size.

If the size of our pillowcase is 50 cm by 70 cm, then the cutting of the fabric should be like this.

As a result, the size of the fabric cut for sewing a pillowcase measuring 50 cm by 70 cm will be 53 cm by 170 cm.

Step 3 – Make 2 fold folds from the ends along the width of our fabric and sew them on a sewing machine.







Step 4 – Bend the resulting workpiece in the places indicated in the picture

These folds will determine the shape of the future pillowcase with a valve (smell) size of 25 cm, which is the most optimal size as a pocket for our pillow.

Step 5 – Fold it into a rectangular shape, as shown in the picture


That is, the essence is this, from one edge we make a bend of 25 cm (valve size), and from the other edge to the place of the already formed bend (to the end of the opposite edge) we bend the rest of the canvas (70 cm).

For convenience, the pattern of cutting a pillowcase for any pillow size can be calculated using our calculator.

Thus, we have got a blank for sewing a pillowcase folded, where on the one hand it took 25 cm inward under the smell, and on the outside (we throw it over from above) – 70 cm.

This moment is the key in preparing our template (patterns) for sewing a pillowcase with a smell.

Based on this approach, we can conclude that such a template can be made not necessarily from a single piece of fabric, but from scraps, waste, its individual elements, which can significantly reduce the cost of our pillowcase and also give its appearance a certain creativity.

Next, we turn to sewing business.

Step 6 – fix this position with needles (pins) in the indicated places, to maintain the stability of the resulting shape and the inner fold (valve)




Step 7 – We sew a seam from each edge along the length, as shown in the picture and cut off the protruding threads


Step 8 – Take out the needles (pins)


Step 9 – We turn our product inside out so that the valve is outside




Step 10 – Again we fix the valve in the indicated places for form stability

Step 11 – Again we make a seam from each edge along the length, as indicated in the picture

Step 12 – Take out the needles (pins)

Step 13 – Turn our product

onto the front side


Here is the wrap-around pillowcase and ready.

Using this algorithm, you can sew a pillowcase of any size and from any fabric.
If you show your ingenuity, it is not difficult to guess how this method can be used to sew a pillowcase from separate scraps of fabric without having a whole piece of cloth at hand.

How to choose an orthopedic pillow for sleeping correctly, tips and tricks

The rules for choosing a bedding with an orthopedic effect are determined by the structural features of the human spine. In its natural position, it has a curved shape, with a greater bend in the cervical region.In the upright position, muscles are responsible for correct support of the spinal column, but in sleep all muscles are relaxed, so the cervical spine may require additional support.

When should you use the orthopedic pillow?

The decision to purchase a pillow with orthopedic properties is made individually. However, in some cases, experts strongly recommend sleeping on this particular model:

  • Disorders and diseases of the upper spine.In this case, the orthopedic pillow supports the body in the correct position, which helps relieve pain and strain.
  • Fatigue, headaches, back problems. Most often found during sedentary work or excessive physical exertion. In this case, sleeping on a model with an orthopedic effect helps to relieve pinched nerve endings and restore normal blood circulation, including the brain.
  • Difficulty falling asleep. Often, insomnia is associated with problems of internal organs, stress or inappropriate parameters of a sleeping place.For those who restlessly sleep at night, such a pillow will help to relax and make the rest complete.

What are they?

Orthopedic and spine doctors are working on the development of the shape of the orthopedic pillows, whose task is to achieve the most successful combination of comfort and benefits for the spine. Today manufacturers offer the following model options:

  • Rectangular. A pillow of a classic shape, which provides an orthopedic effect exclusively due to the filling.Suitable for those who have no health problems and seek to ensure themselves a comfortable sleep.
  • Wave-like pillow. The model seems to consist of two rollers of different heights with a small depression in the central part. One of the most popular solutions for orthopedic pillows, as it can adapt to any position of the body: the smaller cushion is comfortable for sleeping on the back, the larger one for sleeping on the side.
  • With shoulder recess. Especially comfortable for those who prefer to sleep on their side, as well as for overweight people.
  • Crescent. They are the most soft and provide comfortable support for sleeping on your back.

Size

One of the key criteria for answering the question of how to choose an orthopedic pillow is the size. The ability to take a comfortable and anatomically correct sleeping position directly depends on how exactly the dimensions correspond to the needs of the owner.

Today, the width of orthopedic models for adults varies in the range of 30-50 cm, the length varies in the range of 40-80 cm, however, most manufacturers adhere to the standard dimensions of 50×70 cm for ordinary pillows.As for children’s products, the most popular parameters in this case are 50×40 for schoolchildren and 20×30 cm for toddlers.

What should be the height of the product?

Model thickness is another important parameter. The price of the correct answer to the question of how to choose the height of the orthopedic pillow is absolute comfort, correct support and, as a result, a healthy spine, so this indicator must be taken seriously.

Today, the height of an orthopedic product ranges from 6-16 cm, however, the selection must be carried out individually in each case.To do this, measure the distance from the edge of the shoulder, its most protruding upward part, to the base of the neck. In this case, the permissible error in the value can be no more than 1-2 cm.

Stiffness

Just like mattresses, the degree of hardness of orthopedic pillows varies from particularly soft models to products with increased elasticity. The choice of bedding for this parameter depends on the following factors:

  • Habitual sleeping position. For those who like to sleep on their backs, a low and rather soft pillow is suitable.The lowest and softest models are recommended for those who are resting on their stomachs, and for sleeping on their sides it is worth looking at the taller and harder models.
  • Stiffness of the mattress. High orthopedic pillows are selected for a mattress with medium and higher hardness – to create a natural bend and the necessary cushioning. For a softer mattress, a thinner model is suitable.
  • Personal feelings. The appropriate stiffness can also be determined by the level of your own comfort. If the shoulders grow numb, and there is a desire to put a hand under the head – the pillow is too soft, if there are pains in the neck and the chin almost touches the chest – the product is too hard.

Fillers for orthopedic pillows

The basis of the effect of this kind of pillows is the fillers. Today the following materials are most commonly used:

  • Latex. The foamed rubber tree sap has a medium hardness. Such pillows keep their shape well, are resilient, quiet, effectively wick moisture away and serve for 5 years or more. Some models can also have a massage effect due to the tubercles. Among the disadvantages is a rather high cost.
  • Buckwheat husk. Buckwheat husk is considered one of the most environmentally friendly and affordable fillers. Provides good support and an unobtrusive natural massage. Slight discomfort can only be caused by the perceptible weight of the product and rustling during use.
  • Memory foam. A high-tech material, less rigid than latex, but still resilient enough. Follows the contours of the neck and head for comfortable support and maximizes the natural curve of the spine.It is necessary to get used to the material, as it causes an unusual enveloping sensation.

Tips for buying an orthopedic pillow

When choosing the right bedding, it is important to take into account all possible nuances. When purchasing an orthopedic pillow, you should follow a few simple rules:

  • If there is an opportunity to test the product, you should not miss it. Today, in most stores, sellers give customers the opportunity to lie down on orthopedic pillows in order to assess the degree of rigidity and height of the products they like.
  • Matching the mattress to the pillow is an important condition. A high-quality and functional mattress tailored to the individual needs of the owner, in combination with such a pillow, will ensure optimal organization of the sleeping place. If the mattress is damaged, unusable or uncomfortable, even the most expensive model itself will not provide the desired comfort.
  • Balance of price and quality. When considering how to choose an orthopedic pillow, it’s important not to prioritize cost. Products that are too cheap become unusable very quickly, and if the model of the premium category is chosen incorrectly, it will not give the necessary relaxation.

Related Posts

Leave a Reply

Your email address will not be published.