– – ARKETPrivacy notice – Promotions
Why do we use your personal data?
Upon your request we will process your personal data in order to provide you with promotions from us and from other brands of the H&M Group.
How do we use your personal data?
We will communicate with you either through email or text-message, or in your Brand account where our promotions will be displayed in your web browser. If you are a user of a social media platform you may even hear from us in your feed. To be able to identify you in these different channels we use your name and email – address. If you have chosen to receive promotion through SMS, then we use your phone number to be able to communicate with you.
In order to make promotions even more relevant to you we may personalise the content before we send it based on what we know (or perceive we know) about your interests and preferences. Personalisation also comes through analyzing and predicting aspects concerning your interests, preferences, behavior etc., by making use of a combination of data about you such as your personal details and shopping history as well as data from third parties.
For social media advertising we use target group definitions provided by the social media platform provider. We use target group definitions on the basis of general demographic details, behaviour, interests and connections. We may also use data from web site “cookies” (first- and third-party cookies), pixels and plug-ins and similar technologies tracing the websites you have used recently, your clicks and likes. To keep you updated about the use of “cookies”, please check out our Cookie Notice here.
Who has access to your personal data?
We may share your personal data within the H&M Group. Data will also be shared, when necessary, with third party communication providers, media agencies and technical suppliers for analytics, content creation and distribution.
To be able to provide you with promotions in your personal social media feed we will use listing-services such as custom audience. To do so we will match your contact details for instance email address with the social media platform such as Facebook, Google, Snapchat etc. We will use a hashing technique to make sure we handle your data in a secured way. Any social media or communication service provider is responsible for their own personal data processing activities.
Except as explicitly stated herein, we never pass on, sell or swap your data to any third parties.
What is the legal ground to process your personal data?
The processing of your personal data is based on your consent when you agree to receive promotions from us and from other H&M Group brands.
How long do we keep your data?
We will use your personal data no longer than necessary. Personal data solely collected and used for the purpose of providing you with promotions will be erased upon the withdrawal of your consent or your request for erasure.
However, we may continue to keep and use your data if we have outstanding obligations to you or by any other reasons are prevented from erasure, for example if you have an open order or unsettled debt.
Your right to withdraw your consent?
If you don’t want to receive any further promotions, you have the right at any time to withdraw your consent.
As an alternative mean you can also stop us sending promotions in your social media feed, by configuring the privacy settings of the social media platform.
Regardless of above, we will stop sending promotions in you channels if you haven’t opened any emails from us during the last year.
How to withdraw you consent?
You have three options for consent withdrawal;
Follow the instructions in each email,
Edit the settings in your Brand account
Contact “Customer Service” at [email protected]
Read our General privacy notice
– – COS
Email EmailEnter password
Minimum 8 characters 1 number 1 uppercase 1 lowercaseShow
Please confirm your new password Please confirm your new password Show
Buy Women’s Cotton A Line Skirts Online
The Australian designers behind Rasaleela have reinvented the always classic, always elegant A-line skirt. Crafted from the finest quality Indian cotton and other natural fibres, our stunning A-line skirts feature bold, eclectic prints sure to brighten up your day.
Cotton A-line skirts that never go out of style
The women’s A-line skirt is a classic, tried-and-true silhouette that never goes out of style. For all occasions, wear this feminine yet sophisticated style: in the office, out to brunch, on a beachside holiday, out for a celebratory dinner – it’s your call.
Universally flattering, these staple pieces are a must-have for any contemporary woman. Paired with our exciting and unique collection of bold, bohemian and Vintage inspired prints, Rasaleela’s collection of women’s A-line skirts never go out of style .Their enduring longevity also makes them a sustainable garment choice.
Shop A-line skirts online ideal for the Australian climate
All of Rasaleela’s women’s A-line skirts are designed right here in beautiful Australia – we totally understand the need for clothing that covers all seasons and is also great for layering in between seasons too ! Our clothing collection is specially crafted to ensure comfort, breathability and effortless style.
With that in mind, we use the finest quality Indian cotton cambric, which not only feels great against the skin but also allows for ample airflow for all-day comfort.
Women’s A-line skirts with a conscience
You want to feel good about where your clothes come from. Many mainstream fashion houses engage with manufacturers that underpay their staff, who are forced to work long hours in unsafe conditions.
Not at Rasaleela. Our women’s A-line skirts are crafted by garment production staff that we work alongside with for 6 weeks a year (3 weeks per visit, twice a year) and have a long standing relationship with. So we know from direct experience on-site, that they are paid an above-average wage, are respected as individuals and this is reflected in the high quality of the garment production.
Treat yourself and feel good about doing it when you shop A-line skirts online at Rasaleela.
Long Aline Skirt, Tall Skirt, A-line Skirts Knee Length, a line skirts, dress skirts
Stunning modest A-line skirt, made from 100% cotton, offers both comfort and style. This ankle-length skirt features 40-inch length.
Easy Comfort & Easy Care!
- Offers all-day comfort
- Style: Casual and Relaxed
- Easy to care for:
Machine Wash, and Gentle-cycle Dry. OK to iron.
- Made of 100% cotton
- Pockets: Real pockets front only. Rear pockets not real / functional.
- Skirt Length: 40″ [102 CM]
Please follow the Waist Size Measurement, and not your previous purchase history. This item has cotton content, no stretchy spandex. Please call at 800.250.9310 / 734.620.9991 for a free sizing consultation.
|Size||Skirt Waist||Skirt Hip||Skirt Bottom Width||Skirt Length|
|6||26″||66 cm||36″||> 33″||40″|
|8||28″||71 cm||38″||> 33″||40″|
|10||30″||76 cm||40″||> 33″||40″|
|12||32″||81 cm||42″||> 33″||40″|
|14||34″||86 cm||44″||> 33″||40″|
|16||36″||91 cm||46″||> 33″||40″|
|18||38″||97 cm||48″||> 33″||40″|
|20||40″||102 cm||50″||> 33″||40″|
Skirt is an irreplaceable piece of clothing in the wardrobe of every girl and woman. A correctly chosen style will emphasize the dignity of the figure and hide its flaws, as well as attract the attention of the surrounding men. Before sewing clothes, it is important to choose the right type of fabric so that it matches the given image, fits comfortably on the body and provides comfort in the sultry heat. In our article we will tell you how to choose a fabric for a skirt among a wide range.
Types of materials for skirts
The following types of fabrics are used in the sewing of skirts:
- Linen . This is the perfect solution for a sultry summer. The natural material is hygroscopic, comfortable to wear and has good breathability. In its pure form, flax is strongly wrinkled, therefore it is used in conjunction with stronger fibers;
- Cotton . Natural material allows air to pass through in summer and retains warmth in the cold season, so the material is comfortable at any time of the year;
- Silk .Soft touch, lightweight and flowing material. It is moisture permeable, wear resistant and hypoallergenic. The fabric looks beautiful on summer skirts;
- Velvet . The canvas stands out with a soft, thick pile and attracts others with a noble look. Good drape allows for unique silhouettes. Usually festive models are sewn from velvet, which are not used for everyday wear. The fabric has a complex cut due to crumbling villi;
- Wool .Due to its beauty and warmth, the material is in demand in the creation of winter skirts. The assortment is represented by fabrics of different density;
- Atlas . The canvas attracts with a smooth texture and a shiny surface that shimmers beautifully. The material has all the advantages of blended fabrics. These factors predetermined the active use of satin in the creation of both casual skirts and formal models. You can even sew festive clothes for a wedding;
- Corduroy .A blended material that sits comfortably on your body and keeps you warm. Basically, models for the cold season are sewn from it. Corduroy combines sophisticated and laconic design. It takes the shape of the body well, therefore it looks appropriate on almost all figures;
- Denim . Denim is suitable for any season. Thanks to its dense texture, the material emphasizes the dignity of the figure and hides its imperfections. Classic denim is made of cotton, but to create a skirt, it is better to use stretch, which includes elastane threads;
- Jacquard .Material of extraordinary beauty, but the price is not budgetary either. Skirts are sewn from it to the floor for professional models;
- Gabardine . Durable and breathable fabric that won’t wrinkle or shrink wash. Externally, gabardine is a ribbed suit fabric. The material is unpretentious to maintain, but due to its high flowability, it requires extreme care when cutting.
Selection of fabric for a skirt by style
When choosing a material, you need to take into account the style of the future skirt:
For a slender figure, you need to choose a dense fabric that does not show through.This material holds its shape well and does not wrinkle after active walking. Pencil skirts fit the legs, so they should be made of soft fabric. For these purposes, dense knitwear or silk is suitable, linen and corduroy look appropriate.
The tulip is suitable for busty girls or ladies who have a narrow waist combined with wide shoulders. The style will visually increase the hips, but reduce growth. Therefore, the model is not suitable for short girls.
The tulip style requires a material that lends itself well to draping and allows you to create folds.This will help fabrics of the mixed group based on cotton: satin, jacquard and velvet.
Sun and semi-sun
This silhouette is best suited for flying fabrics that drape well and form soft folds. Usually skirts in the shape of a circle and a semicircle are used in summer, therefore they are made from canvas based on natural threads:
Outfits in a multi-layer design are best sewn from translucent fabrics.
To create this style, translucent canvases with an airy texture are used. The number of layers is selected based on the purpose of the garment. For an evening event, a floor-length skirt is suitable. In everyday wear, a knee-length “tutu” or a short cut is appropriate. Usually such models are made of chiffon or tulle.
This skirt is designed to slightly hide wide hips, but is not suitable for women with wide calf muscles.For the “year” style, a loose and opaque fabric is selected. It is important that the canvas can form soft folds at the bottom. This will help satin, velvet, knitwear or jacquard.
The style simplifies the silhouette and makes it longer, inappropriate for a large figure. Only dense material that can hold folds is suitable here. The composition of the material should be dominated by synthetic threads in combination with natural ones. The best characteristics for pleated skirts are: velvet, tulle, silk, cotton.Denim also looks interesting.
Thick fabric is appropriate in this style, as it should keep its shape well. For sewing, select material that is not loose, so that it can form a trapezoidal silhouette, and does not hang down. The style is suitable for ladies with any physique, except for the dense one. The best trapezium properties are:
Skirts with pockets or other inserts are suitable for women with a dense physique. To hide the flaws of the figure, dense fabrics are used: corduroy, denim, linen in combination with artificial threads. Theoretically, velvet is also suitable for models with pockets, but it is difficult to process.
For these models, choose an elastic fabric with a soft texture. The ideal solution would be lace or knitwear.
The pleated style can be worn for any occasion. For ironed folds, poplin or gabardine is thick. Natural materials would be ideal, but they do not hold their shape well.
The style emphasizes the elegant image, it looks interesting on any figure. It visually reduces height and helps to hide leg imperfections. Satin, chiffon and silk are the best options for summer models. Denim is appropriate for sewing classic products.
For the selection and purchase of the necessary fabric in bulk, please contact the Vulkan-A company. A wide range of materials allows our clients to choose the best solutions for any occasion, season and preferences of the female audience. All products undergo strict quality control in a certified laboratory.
Return to the blog90,000 pattern, 12 options for modeling, cutting and sewing
A-line skirt model is an example of a silhouette that has not lost its relevance for decades.It has no restrictions on length, color, and can be made from almost any fabric. In this article, we will look at the main options for the pattern of the A-line skirt.
Who suits this style
Ideal for inverted triangle shapes. By balancing the broad shoulders, the trapezoid makes the figure more proportional.
This silhouette is also suitable for women with a triangle figure. Moreover, in this case, the choice of medium length will be preferable, which will hide wide hips and visually lengthen the legs.
For ladies with an “apple” body type, choosing the A-silhouette, it is preferable to stay at the length to the middle of the calf to balance the shape.
For slender young ladies, there are practically no restrictions on the choice of length. But they should avoid vertical patterns that lengthen an already slender figure.
Popular models of a-line skirts
Suitable not only for slim, but also for overweight women. This skirt can be made both in a business style and for everyday wear.
Feminine and romantic version of the trapezoid. By varying the type of folds, you can correct figure flaws. A mid-length skirt with pleats is a classic business suit in Moscow and other European cities.
Wonderful summer version of the skirt. Most often sewn from thin, breathable fabrics. The elasticated skirt is very comfortable, suitable for almost any type of figure. In addition, sewing it with your own hands is very simple.
The arrangement of the buttons determines the style of the skirt. From the strict style of the school uniform to the free one.
As mentioned above, trapeze skirts can be sewn from almost any material. The selection criterion will be the season of the year for which this model is sewn.
The popularity of denim skirts can be easily explained. They are versatile, practical, youthful.
Soft, tight-fitting skirt perfectly holds its shape and emphasizes the figure.Sewing a practical and elegant leather skirt at the same time, you will get the perfect outfit for every day.
First, let’s define the terminology. To do this, carefully study the diagram below.
For a-line skirts, the most common are mini, midi and maxi options.
A slim figure is required for a mini skirt that reveals the legs.
Midi length is suitable for most types of female figures. The A-silhouette, which makes the curvy hips more slender, allows you to visually stretch the figure.
Maxi length fits almost all women. For example, an evening long dress with an A-line skirt will always be very feminine and elegant. The dress pattern with this skirt option should be with a laconic bodice, not overloaded with bulky details. Also, long skirts made of light, airy fabrics are an ideal choice for a summer walk.
Let’s take a closer look at how the most common options for trapezium skirts are made.
Construction of a trapezoid skirt pattern
The shape of these skirts in the classic version resembles a geometric figure – a trapezoid.Emphasizing the silhouette at the waist, expanding to the bottom guarantees almost universal use of the A – silhouette models. The construction of a trapezium skirt pattern is simple, it is available for novice dressmakers.
A straight silhouette skirt pattern is used as the base one. You can build a pattern yourself or download it for free on the Internet. Step-by-step instructions for building a basic pattern are on our website.
We re-take both panels of the skirt onto tracing paper.
Modeling a simple A-line skirt consists of creating an extension at the bottom.
This can be done in two ways.
Set aside along the bottom line from 3 to 7 cm (depending on the required expansion) and build a new side line of the parts. At the same time, do not forget to round off the lower cut of the skirt by lifting it along the side cuts. This is to align the length of the skirt. We do not remove the darts at the waist with this modeling, they remain in their places.
The second method allows you to get a more beautiful fit of the product.The trapezoidal shape is created by closing the darts at the waist and widening at the bottom. We extend the central lines of the darts to the entire length of the skirt.
We make cuts along the outlined lines. We close the dart at the waist, getting an extension at the bottom. But since the width of the back and front darts is different, then the lower extension will also be different. Since the back dart is wider, the back part will also be wider, which, with a standard figure, will cause the side seam to shift forward.
Whether to align the flare to the bottom depends on the features of the figure.
For women with curvy buttocks, a wider back panel is the best fit. For standard shapes, the front dart closes completely, and the back dart by the amount of the front one. Thus, the dart remains on the rear panel, but of a smaller width. Additionally, we carry out the expansion along the side seams – see the photo.
A-line skirt: video master class
Pleated A-line skirt
A plaid skirt is sewn from rectangular fabrics.Trapezoidal pleats create a beautiful A-line silhouette. At the same time, the model does not look bulky at the waist, the folds do not bulge.
Let’s consider the construction of a pattern of such a model for OT = 84 cm. This parameter will be the main and only one determining the width and depth of each fold. Hip girth is not included in this calculation.
We take the depth of each fold equal to 7 cm (along the waist line). Accordingly, the number of folds is 84: 7 = 12.
To determine the depth of the fold, multiply its width by 4.We get 7×4 = 28 cm.
We lay aside the dimensions on the pattern symmetrically in both directions, dividing the width and depth of the fold in half, that is, 1⁄2 of the width (= 3.5cm) and 1⁄2 of the depth (= 14cm) in each direction.
Place the pattern, taking into account the direction of the share thread. The axis of symmetry of the folds should coincide with the warp thread. The flare at the bottom is determined depending on the length of the skirt. In our calculation, this is a midi length of 85 cm.
How folds are laid
In the next photo, the width of the fold is shown in gray.For clarity, we will divide the process into steps. At the first, the fold is bent so that its edge coincides with the axis of symmetry. At the second step, the fold, mirroring the first, is bent so that its edge is adjacent to the edge of the first.
As a practice, it is recommended to try this bookmark on paper. The step-by-step process is shown below. It makes sense to trim the waistline after laying all the folds, and not each separately. There is no need to trim the bottom of the skirt.
Depending on the material used, we make a decision on the advisability of ironing the folds. If the fabric keeps its shape, then this is not necessary. We sew the considered model of a skirt from cambric and silk, so we iron the edges of the folds.
Since such a skirt with folds requires three sheets of fabric and their total width will be 4.5 m, it is more convenient to lay folds on each sheet separately. Then we sew the canvases together.Insert a hidden zipper into one of the seams. It is more convenient to do this by sewing the 1st and 2nd panels.
Contrast the third panel with the 1st and 2nd.
Sew on the belt, process the bottom of the product. If desired, you can provide an additional fold, thus expanding the volume at the waist. In this case, we make a belt with a partial elastic band, which adds convenience to the product.
A-line skirt with button placket: video MK
How to sew a trapeze skirt with your own hands
Stitch one side seam.We process the allowance with an overlock and iron it out. We turn the lower edge of the canvas, sweep and sew. We sew a lace strip at a distance of 5 cm from the bottom.
Mark the folds on the wrong side, fix them with a basting seam and press them on.
The yokes, reinforced with thermal fabric, are cut off along one edge, swept away with the main part of the skirt, aligning the side seams. We carry out a machine seam.
Sew a zipper into the open seam.
We cut off the inner details of the yokes along one edge, iron the allowances.Fold the yokes with the front sides, sweep along the top edge and zipper braids. In this case, the zipper is inside the yokes. We carry out machine stitching.
We turn out the yoke, turn the allowance along the bottom cut, sew it by hand with a blind stitch. The skirt is ready!
A-line skirt model with buttons and side pockets
In a detailed master class, we will show you how to sew a trapeze skirt with your own hands without a pattern.
To make a short skirt you need:
- striped shirts – 0.6 m;
- chintz for burlap pockets – 0.3 m;
- bias tape, 100% cotton, color – small cell – 4 m;
- buttons with a diameter of 13 mm – 8 pcs.;
- threads to match the color of the fabric;
- adhesive fabric – 0.3 m;
- adhesive spider web -2 m;
- sewing tool.
Master class – how to sew a trapeze skirt without a pattern
Pre-moisten and iron the fabric, dry for at least 30 minutes. This will prevent possible shrinkage of the material after the first wash.
Next, we will begin to cut out the details of the product, marking them directly on the fabric.
Cut off a strip 8 cm wide for the belt.From the rest of the canvas, we will sew the main part of the skirt. To create an A-silhouette along the waist line, lay 6 cm on each side, cut off the excess fabric.
We cut the front panel in the center through the entire length – here we will make a button fastener.
Next, we will deal with the side pockets.
We cut out sackcloths for them, using our own hand as a conditional template. We outline the palm with a slight allowance. We cut out 4 parts.
To ensure that the visible part of the pocket does not differ from the main material of the skirt, we make a valance.We cut out two elements from the main fabric with a width of about 5 cm and stitch them into two pieces of burlap.
Place the sackcloths seamy side up without gaps on the front panel of the skirt at a distance of 9 cm from the upper cut of the main part. We attach burlap, retreating the size of the allowance along the side seam (= 1 cm).
We carry out a similar operation with the second panel of the skirt and sackcloths with a valance.
We turn off the burlap on the side allowance, press it on.
Sew all four sackcloths to the edge to prevent pockets from turning outward.
We fold both panels with their front sides to each other.
Pins along the side seam and the edge of the burlap. We carry out a machine seam along the side seam and burlap (red line in the photo), retreating the desired allowance.
Iron the pockets on the front shelf.
We process side cuts.If desired, this can be done with an overlock or processed with an oblique inlay.
It turned out to be a neat pocket.
Next, we will deal with the fastening under the buttons – the pick. We strengthen the central cut with an adhesive cloth. Strip width – 20 mm.
We process the cut with an overlock, if it is absent, you can use a zigzag stitch.
We turn the sideboard on the seamy side by 2 cm, placing an adhesive spider web.
Pin for fixing, iron on.
Cut out a blank for the belt. Its length is equal to OT plus 12 cm.
Cut out a strip of equal length and 3 cm wide from the glue fabric. Glue the belt from the inside out, overwrap one long section with an overlock or zigzag stitch.
Lay out the skirt panel on a horizontal surface. Starting from the center of the back, we begin to symmetrically lay folds in both directions to get 1⁄2 OT for this part of the panel. We pin the formed folds with needles or apply.
Similarly, up to the size of 1⁄2 OT, we lay folds on the front panels, pre-pricking the overlap.
Apply the belt to the upper cut of the skirt, aligning the edges. Pay attention that the lines of the middle of the two parts coincide. We pin the pins for fixing.
We make a machine seam at a distance of 1 cm from the cut.
Smoothing out the waist allowance.
Tuck the belt in half, iron it on.Cut off the ends at the corners – see photo.
We carry out a line along the end corner cuts, cut the corners, cut off the excess allowance.
We turn the belt out, apply it or fix it with pins.
Tuck in the processed section of the belt, apply it. On the front side, we sew a machine line into a seam.
To process the bottom edge of the skirt, first prepare the inlay. We make two opposite folds on it and iron them.We apply the inlay to the bottom edge of the panel along the front side, aligning the longitudinal edges. In this case, at the end of the part, you need to leave a small allowance protruding beyond the panel.
We attach the tape along the edge, retreating to the width of the foot.
We turn the tape on the seamy side, glue it using a cobweb.
We sew loops on the right side of the panel, sew buttons on the left.
A-line skirt without a pattern sewn!
We sew a quarter sun skirt: video master class
A-line skirt pattern: for beginners, step-by-step instructions
A-line skirt is one of the most popular and demanded models for women.With this style, you can create a variety of different and effective images. In the construction of patterns and sewing, these products are very simple, so you can make them with your own hands even without proper experience.
Making a pattern
A trapezoidal skirt is a versatile wardrobe item. This model fits snugly around the waist and flares out from top to bottom.
What measurements are needed
To build a drawing, you should take a measuring tape and measure half-girth of the hips and waist , as well as the desired length of the product.It is also necessary to decide on the increase in freedom of movement. It is recommended to take from 0.5 to 1 cm at the waist, and 1 to 2 cm at the hips. These figures are based on the desired fit of the product to the body, and also depend on the style of the skirt and the texture of the material.
IMPORTANT ! If the material stretches well and you plan to sew a product adjacent to the waistline, then it is better to take the minimum increments, about 0.5 cm.
You can also build a basic pattern yourself.
The drawing is based on a pattern of a regular skirt with two seams. You need to take a large sheet of paper or a roll of unnecessary wallpaper, a pencil, a ruler and perform the following sequence of actions.
- To begin with, draw an angle of 90 degrees, the top of which will be denoted by the letter “T”. The long section to the right will be the waistline. From the T mark, set aside the desired length of the skirt.
- Further it is necessary to designate the hip line . We measure with a ruler from the letter T downwards 20 cm and put the letter “B”. From it we draw a horizontal line.
- Then we find the point “B1”. It is equal to the half-girth of the waist with the addition of an increase in the freedom of fit. Draw a vertical line from this letter, getting marks “T1” and “H1”.
- Fix where the side seam will be . To do this, divide the width of the product in half and subtract 1 cm. The resulting figure should be set aside from point B to the right.Let’s designate it as B2 and draw a vertical line through it until it intersects with the waist and bottom segments.
- Next it is necessary to determine the total solution of the darts . It is equal to the difference between the half-girth of the hips and the waist with increments.
- The position of the rear dart is calculated by multiplying the length of the BB2 segment by a factor of 0.4. The posterior fold gap is determined by multiplying the resulting number by a factor of 0.35.
- The position of the dart of the front of the product is found by multiplying the length of the segment B1B2 by a factor of 0.4.The back tuck gap is determined by multiplying the resulting number by a factor of 0.15.
- The remaining amount of the mortar of the darts is distributed to the side seams.
WARNING! The number and amount of darts depends on the type of shape.
It is recommended to first use the formulas, and then make a layout and adjust the darts after trying on.
Modeling a pattern of a trapezoid skirt
Construction of a trapezoidal shape is reduced to expanding the drawing of a straight skirt .This can be done by setting aside from the side cut along the bottom line on each side from 3 to 7 cm.
For a more beautiful fit of the product, it is necessary to close the darts at the waist . First, cut the pattern from the darts to the bottom and close the darts. At the bottom, the expansion should be even, while the wider dart at the back may not close completely . Therefore, may have two small darts in the back. The bottom of both elements should be nearly the same.
How to sew an A-line skirt
When the pattern is drawn, you need to prepare the fabric, crayon, mold and scissors.
Let’s look at the preparatory process in stages.
- After the fabric is ironed, it is folded in half and facing sides and the pattern is laid on it. In this case, the middle of the front must adjoin the fold of the material . If possible, then it is better to cut the back of the skirt entirely. In this case, the fastener can be placed in the side seam.
- We outline the resulting drawings with a piece of chalk and add a couple of centimeters for processing. It is advisable to leave 2-4 cm for the hem of the bottom, and up to 1 cm for the processing of the top.
- Cut out the belt depending on the model of the product. It must also be drawn in advance. Usually its width is determined by the preferences of the master, and its length is equal to the waist circumference plus 4–5 cm for fastening and processing of seams . You can also use a decorative elastic band as a belt.
Execution of work
Then you can start sewing the product.Follow a specific sequence of actions.
Step-by-step instructions for sewing an A-line skirt for beginners .
- First you should sew darts on the skirt. They are ironed to the middle.
- Next, connect the front and back of the pattern to each other and sew the parts along the side seams. They must be pressed onto the back.
- Then can start processing belt . It must be glued with a duplicating fabric and, connecting in half, iron it thoroughly.This will make it tidier.
- The belt is connected to the skirt along the waist line with pins . There should be a free fastening tip.
- The belt is sewn on a typewriter , and the allowance is folded up and ironed.
- Next, fold the half of the belt onto the front of the skirt and sew its ends.
- The belt folded in half is secured with pins and stitched from the front side of the product at a distance of 1 mm from it.
- Hem can be finished with glue cloth or a normal hem and sewing machine.
The long and short models differ not in the sewing process, but only in the length of the side seam, which is many times greater. Therefore, a little more time is needed for sewing the product.
How to sew a trapezoid skirt with elastic
One of the simplest styles available for sewing is things with elastic bands. You can find spectacular decorative elastic bands on sale. They are soft and easy to sew on. To sew a trapezoid with an elastic band, follow these simple steps:
- The length of the elastic is determined only by the girth of the waist. The elastic should be taken a couple of cm shorter , because during sewing it stretches.
- We connect the sides, first sewing on the wrong side, and then securing the seam across the face.
- Slide the elastic around the skirt so that it is distributed as evenly as possible. We connect the elements with pins vertically.
- Next we make a seam on the machine. Sew in separate sections, adjusting the tension of the elastic and straightening the fabric from the bottom.
Let’s list some of the nuances worth paying attention to.
- When constructing a pattern, more experienced designers and seamstresses can draw only the upper part of the pattern on paper, and then continue to draw the drawing on the fabric using a piece of soap or crayon. This is especially convenient for long items.
TIP! Novice craftsmen should not skimp on tracing paper or paper and make a drawing even for long and wide styles entirely.
- The trapezoidal skirt can be sewn even without a belt.To do this, it is necessary to process the top of the product with a facing.